Yarisworld Archive

1ZZ Throttle Body

11 posts · 3,268 views

Focus_Sh1ftOriginal postNew Jersey · Jan 3, 2011#1
Decided to sell this... I've had nothing but problems with this thing since I installed my turbocharger and it's practically useless now. However, for an NA application it's a great and cheap mod and I promise the difference can be felt.

The part number on this is 22030-0D030. This model is generally a drop in and go mod with no issues. I didn't have any when I first put it in. You will have a high idle on cold start though. No big deal.

$100 shipped takes it.

Replies 10

AstromanWenatchee, WA · Jan 4, 2011#2
Bump for a worthwhile mod! I did the swap with mine and love it.
Betriventedmonton · Jan 4, 2011#3
What does it do?
bail_wBay Area, CA · Jan 4, 2011#4
faster response when you press the gas pedal, correct me if i am wrong.
Focus_Sh1ftThread starterNew Jersey · Jan 4, 2011#5
Originally Posted by bail_w ↑
faster response when you press the gas pedal, correct me if i am wrong.
Not really since it's still a drive by wire throttle body.

The main benefit comes from allowing more air to flow freely into the intake manifold. Across the RPM range you'll be running slightly leaner = more power.

At WOT, you'll really notice a difference.

Also - I'm gonna stop at Home Depot later and get the bolts to reattach the chip - just in case that was turning anybody away.
ilikericesavannah, ga · Jan 4, 2011#6
quick questions.. ive been reading that u need an adaptor plate to fit the throttle body on the intake manifold.. is this true for this application? if so, who or where can i get an adaptor plate? can the plate be made out of a piece of aluminum?
Focus_Sh1ftThread starterNew Jersey · Jan 4, 2011#7
Originally Posted by ilikerice ↑
quick questions.. ive been reading that u need an adaptor plate to fit the throttle body on the intake manifold.. is this true for this application? if so, who or where can i get an adaptor plate? can the plate be made out of a piece of aluminum?
It will bolt right up to the stock manifold.

That adapter plate serves no purpose - You're basically putting on a larger throttle body then restricting the airflow back down to the 1NZ throttle body.
ilikericesavannah, ga · Jan 4, 2011#8
ok, sweet, thanks for the info. i will look around a junk yard for mine.. no offense to you Focus. no rush in getting one right now
weapon5MN · Jan 4, 2011#9
I will take it if you can wait till next friday lol
Focus_Sh1ftThread starterNew Jersey · Jan 4, 2011#10
Yeah no problem, I can wait.
weapon5MN · Jan 4, 2011#11
sweet :D send me a pm so i can find you easier lol