nisyotaOriginal postOrlando, USA · Dec 19, 2010#1Im about to install the Tokico front and rear strut/shock from microimage. Just wondering what the torque specs are or where i can go them from?
Thanks...
Replies 8
CTScottUSA, CT · Dec 20, 2010#2Front strut bottom mounting bolts: 121 ft lb
Front strut brake hose mounting bolt: 22 ft lb
Front strut top spring compression nut: 25 ft lb
Front strut top nut: 41 ft lb
Front strut stabilizer bar bolts: 55 ft lb
Rear shock top nut: 18 ft lb
Rear shock bottom bolt: 36 ft lb
Lug nuts: 76 ft lb
nisyotaThread starterOrlando, USA · Dec 20, 2010#3thank you so much!!!!!
annnseattle · Dec 20, 2010#4Remember to support the drive axels well.
Btw are you hats/ the washers that hold the front struts on at the top , have a gap in them ?😁
nisyotaThread starterOrlando, USA · Dec 20, 2010#5i dunno... havent started. lol
annnseattle · Dec 20, 2010#6 Originally Posted by
nisyota ↑ i dunno... havent started. lol
Perfect... Before you start please check and see if the hats are raised ?? Thanks
I just did a eibach spring and tokico hts upgrade , so of ya need any info their I'd tons of info on this site !
ShinareOklahoma City, OK · Dec 20, 2010#7I've been meaning to do this for everyone ever since the big argument in the other thread about this. My car's suspension is bone stock, noting REPEAT nothing has ever been done to it. Its this way from the factory:
Picture not included in this copy
PS> car is empty in this pic
nisyotaThread starterOrlando, USA · Dec 21, 2010#8i won't forget... you guys know what the torque spec is on the serpentine belt??? thanks again!
CTScottUSA, CT · Dec 21, 2010#9 Originally Posted by
nisyota ↑ i won't forget... you guys know what the torque spec is on the serpentine belt??? thanks again!
The belt deflection spec is 7 to 8.5 mm for a new belt and 11 to 13, once the belt has been run.
Bolt torque is 14 ft lb for the top bolt and 40 ft lb for the bottom.