Yarisworld Archive

check out these horns

42 posts · 18,224 views

matthewaiOriginal postunited states · Dec 17, 2010#1
hey guys take a look at these i think they'll sound a lot better then the stock horn. can anyone tell me if this is an easy install i assume it is just not sure what to do with the relay it comes with will i have to splice wire or something?
thanks guys and or gals

1 attachment not included in this copy

Replies 41

CTScottUSA, CT · Dec 17, 2010#2
If the combined current draw for the two horns is less than 10 Amps, you can skip the relay and wire them both to the existing horn wire (which is the positive feed) and then you bolt the tab on them to metal as the ground.

If the current draw is more than 10 Amps, then you have to use the included relay to switch a fused feed from the battery.
matthewaiThread starterunited states · Dec 18, 2010#3
oh cool i see i think they are 12v so ill prob end up doing it the second way thanks alot ill update when done
yaris2010RSAngus, Ontario · Dec 19, 2010#4
Originally Posted by matthewai ↑
oh cool i see i think they are 12v so ill prob end up doing it the second way thanks alot ill update when done
i actually LOLD, lol

volts and Amps are very different things. lol

i personally say try them on and if it blows the fuse then bother with the relay
CTScottUSA, CT · Dec 19, 2010#5
If you look at the specs for them, they draw 12A @ 12V.
nemelekArizona · Dec 19, 2010#6
I need to get a louder horn.
coheedMaiden, NC · Dec 19, 2010#7
Eh.... those are weak, go with a setup like this. Its about 130dB's. Sounds like mini train.

1 attachment not included in this copy

CTScottUSA, CT · Dec 19, 2010#8
Originally Posted by nemelek ↑
I need to get a louder horn.
I've been trying to decide on what to go with for a while. After looking at and listening to a bunch of different ones I have it narrowed down to the Stebel Nautilus or TMS80

http://www.stebel.it/stebel2009/prod...tipologia=auto
matthewaiThread starterunited states · Dec 19, 2010#9
Originally Posted by yaris2010RS ↑
i actually LOLD, lol

volts and Amps are very different things. lol

i personally say try them on and if it blows the fuse then bother with the relay
ahhaha yes i did not fully read and process scotts reply ill have to check the box for amps not volts
sqcompBack at home · Dec 19, 2010#10
Coheed...

Yeah baby! Now, stick those horns in the back bumper facing down to the ground for the best sound pressure distribution...

Picture not included in this copy

Of course the little camera mic doesn't do it justice...
CTScottUSA, CT · Dec 19, 2010#11
Originally Posted by matthewai ↑
ahhaha yes i did not fully read and process scotts reply ill have to check the box for amps not volts
I was giving you the benefit of the doubt on that, since I checked Hella's website and saw that the pair actually draws 12 A. So, the relay will be necessary.
fnkngrvIn The Hotbox · Dec 19, 2010#12
I have learned now that I am living in Alabama I had best invest in a horn upgrade.
sqcompBack at home · Dec 19, 2010#13
I did the Hella three tone electric air horns...and it still isn't enough! I need one of those HornBlasters pieces but I refuse to give up (more) space in my trunk...so I'm stuck.
CTScottUSA, CT · Dec 19, 2010#14
Originally Posted by sqcomp ↑
I did the Hella three tone electric air horns...and it still isn't enough! I need one of those HornBlasters pieces but I refuse to give up (more) space in my trunk...so I'm stuck.
The train horn on the truck in your video sounds awesome. You just need to do an airbag suspension so you can justify the space for a compressor and put that same setup on your car.
sqcompBack at home · Dec 20, 2010#15
I've got too much "junk" in the trunk. No pictures until May, but trust me...too much going on.
JetfireKSlidell, LA · Dec 20, 2010#16
Originally Posted by sqcomp ↑
I did the Hella three tone electric air horns...and it still isn't enough! I need one of those HornBlasters pieces but I refuse to give up (more) space in my trunk...so I'm stuck.
You can buy HAND HELD AIR HORNS at any boating store. Might not be dandy in the rain...but they are LOUD...LOUD...LOUD...Maybe cost 10 dollars or less...Your passenger can hold it and blast as you go past.....
sqcompBack at home · Dec 20, 2010#17
Those are fun indeed. In a past job, I snuck up on a shoplifter who has just left the store loaded...I came up right behind him and BLASTED that compressed air horn...he actually pissed his pants. I love that work, just doesn't pay for $hit taking into account the risk.
matthewaiThread starterunited states · Dec 24, 2010#18
so i understand ill prob have to use the rely where exactly does it go? in the fuse box? do i have to switch it with a stock one or it just goes in on its own? thanks
CTScottUSA, CT · Dec 24, 2010#19
Originally Posted by matthewai ↑
so i understand ill prob have to use the rely where exactly does it go? in the fuse box? do i have to switch it with a stock one or it just goes in on its own? thanks
I'll post some pictures in a little while, but I installed my Stebel horns last night. I used a smaller relay (one of the small blue Toyota ones). By using the smaller relay I was able to fit the relay and all of the wiring inside of the under dash fuse panel.
coheedMaiden, NC · Dec 24, 2010#20
Originally Posted by JetfireK ↑
You can buy HAND HELD AIR HORNS at any boating store. Might not be dandy in the rain...but they are LOUD...LOUD...LOUD...Maybe cost 10 dollars or less...Your passenger can hold it and blast as you go past.....
Those thing are quite compared to the one I've got on mine. Those are what 115-120dB's? The horn I have is measured at 135dB's at a foot away.
Originally Posted by sqcomp ↑
Coheed...

Yeah baby! Now, stick those horns in the back bumper facing down to the ground for the best sound pressure distribution...
Of course the little camera mic doesn't do it justice...
No I got em mounted under the hood (see pics). There are still ridiculously loud in there. I can honk them in my driveway with the hood closed and it'll echo for about 2-3 seconds. I'll go out and grab a quick vid here in a sec and post it up.

Edit: Forgot to ask. Is that a Nathan P3 on the Avalanche?

2 attachments not included in this copy

CTScottUSA, CT · Dec 24, 2010#22
Now THOSE are horns!

Here's a video comparison of the OEM horn to my new Stebel horns:

http://www.youtube.com/watch?v=-Wmxu1mJezI


Here's how I wired it to keep everything neat within the under-hood fuse box:

Picture not included in this copy


I used a Toyota 90987-02027 or 90987-02012. This is a small SPST relay with 30A rated contacts. It is the same relay that is used for quite a few other functions in the Yaris, including the fog light relay.

Picture not included in this copy

The coil of the relay gets connected to the horn wire (green wire in pin 1 of connector BA1) and ground (white wire with black stripe in pin 2 of connector CA1).

Picture not included in this copy

Picture not included in this copy

One contact of the relay goes to a battery power feed (I used one of the unused fusible link positions) via an appropriately sized fuse (20A in my case). The other goes to the positive power feed of the horn(s). The negative terminal(s) of the horn(s) go to a chassis ground point (like the mounting bolt of the horn).

Picture not included in this copy

Here are the horns mounted. It turns out that there is a second tapped mounting hole under the plastic bumper support that is above the stock horn:
Picture not included in this copy

6 attachments not included in this copy

sickpuppy1Kansas · Dec 24, 2010#23
Nice tidy Install CT. Out of curiosity , why did you go with the TM80 over the nautilus. Just the sound, (deeper tone on the TM80 vs the nautilus) or was it conventional horn vs air?
I seem to be drawn to the Nautilus because of the higher tones I think. Both are equally loud, so in the end it may just be personal preference. Just curious about why you chose that one
CTScottUSA, CT · Dec 24, 2010#24
Originally Posted by sickpuppy1 ↑
Nice tidy Install CT. Out of curiosity , why did you go with the TM80 over the nautilus. Just the sound, (deeper tone on the TM80 vs the nautilus) or was it conventional horn vs air?
I seem to be drawn to the Nautilus because of the higher tones I think. Both are equally loud, so in the end it may just be personal preference. Just curious about why you chose that one
Price! I was going to go with the Nautilus (I like the tone of it a tad more), but found an ebay vendor that sells the TM80 set for $23 shipped, so I couldn't resist.
matthewaiThread starterunited states · Dec 24, 2010#25
yo awesome scott looks great thanks so much merry grizzmas
matthewaiThread starterunited states · Dec 29, 2010#26
so hey im gonna bring my car to get the horn installed but i also noticed on the rely it says 12v 30a didnt relize before im guessing its 30 amps does this sound right? so yeah ill deff have to use the rely i guess ill find out in a day haha
CTScottUSA, CT · Dec 29, 2010#27
Originally Posted by matthewai ↑
so hey im gonna bring my car to get the horn installed but i also noticed on the rely it says 12v 30a didnt relize before im guessing its 30 amps does this sound right? so yeah ill deff have to use the rely i guess ill find out in a day haha
That's fine. The 30A rating is for the relay contacts, so it is fine for switching the 12 Amps required by the horns.
matthewaiThread starterunited states · Dec 29, 2010#28
yeah seems pretty straight forward ill get a video or something when its done im not gonna do a before because we all know what the stock horn sounds like...dinky
sickpuppy1Kansas · Dec 29, 2010#29
I've seen those also CT, but I notice many of them say "has cracks on the side from manufacturing defect." I'm shying away from those,lol. Havent made up my mind yet.
CTScottUSA, CT · Dec 29, 2010#30
Originally Posted by sickpuppy1 ↑
I've seen those also CT, but I notice many of them say "has cracks on the side from manufacturing defect." I'm shying away from those,lol. Havent made up my mind yet.
That's exactly the one I went for. Turned out that they were perfect - no defects.
sickpuppy1Kansas · Dec 29, 2010#31
No kidding! I thought, well, I could smear a light coat of JB Weld on the exterior to firm it up but......OK, I may go for it. But ,like you, I like the Nautilus tone better. A bit higher and maybe a bit more annoying? Which is what a horn is for is it not?!
matthewaiThread starterunited states · Dec 31, 2010#32
so i just got them installed they sound way better then stock but the guy i went to said he didnt need the rely now i was a little skeptic but maybe he used something else i just figured he knew what he was doing. now if something were to go wrong would it happen right away or would it take a while to know if its fugged up? cuz i did the whole test of holding it down for like 20 seconds and nothing happened if a fuse were to blow or something does that take a while or would it have happened instantaneously thats all im getting at anyway ill try to post a vid
*MAD DOG*Victoria, Australia · Jan 1, 2011#34
Originally Posted by CTScott ↑
Price! I was going to go with the Nautilus (I like the tone of it a tad more), but found an ebay vendor that sells the TM80 set for $23 shipped, so I couldn't resist.
Trombe Stebel Nautilus FTW! DIY - TROMBE STEBEL NAUTILUS 139dB

I have had these for what seems like ages now. Still love them and still surprises people as to how loud my car horn is. Best part was no air tank. Ok I lied, the best part is the 139dB of AWESOMENESS!

But I dare say the twin set you went with would be really nice too.
CTScottUSA, CT · Jan 1, 2011#35
Originally Posted by matthewai ↑
so i just got them installed they sound way better then stock but the guy i went to said he didnt need the rely now i was a little skeptic but maybe he used something else i just figured he knew what he was doing. now if something were to go wrong would it happen right away or would it take a while to know if its fugged up? cuz i did the whole test of holding it down for like 20 seconds and nothing happened if a fuse were to blow or something does that take a while or would it have happened instantaneously thats all im getting at anyway ill try to post a vid

Most electrical devices don't draw the full amount of current that the manufacturer lists (which is an absolute max rating). The worst case scenario is that as the horns age and the diaphragms stiffen, causing them to require more current to move, that the 10A fuse will pop.
matthewaiThread starterunited states · Jan 1, 2011#36
oh okay i see i guess ill jsut let em ride for now them seem and sound great so im happy for now
matthewaiThread starterunited states · Jan 1, 2011#37
one last thing as for weather elements and wetness as long as the connections were siliconed which they were it should be fine right?

yeah and also for 23 dollars (amazon) it was just a great deal
matthewaiThread starterunited states · Jan 2, 2011#38
i know its lame the the red side is not facing out but then i realized its kinda cooler being hidden i dont know hahah should have done it myself oh well

1 attachment not included in this copy

matthewaiThread starterunited states · Jan 3, 2011#39
i am prob gonna end up taking the bumper off and flipping them around i cant believe this guy put em on like this what a moron AHHHH dont you think any one installing horns would have thought about that aspect so annoying paying for something then having to redo half of it i mean yes i am happy i didnt have to do the wiring but still
sickpuppy1Kansas · Jan 3, 2011#40
I ended up buying the TM80 like CT did. Couldnt resist the price! Got 10% off too so right at 20 bucks for a pair of 139db horns. buwaaaaa!
CTScottUSA, CT · Jan 3, 2011#41
Originally Posted by sickpuppy1 ↑
I ended up buying the TM80 like CT did. Couldnt resist the price! Got 10% off too so right at 20 bucks for a pair of 139db horns. buwaaaaa!
Nice! I had a reason to lean on mine for about 30 seconds yesterday and was mighty glad that it sounds a little meaner than the meep-meep...
matthewaiThread starterunited states · May 20, 2011#42
flipped now

1 attachment not included in this copy