Replies continued
ShinareThread starterOklahoma City, OK · Jan 18, 2011#51The only gauge not available to me that I'd really like to have is "Ambient Air Temperature" (amb temp) which I thought the yaris could do because I thought the sensor for that was in the front in the bumper on the drivers side... oh well. So I have it on intake temp which is no where near outside air temp... Gauge setup:
A- Instant MPG
B- Tachometer
C- Engine Temp in F
D- Intake Temp in F
E- Fuel Level
F- Avg MPG
CTScottUSA, CT · Jan 18, 2011#52 Originally Posted by
Shinare ↑ The only gauge not available to me that I'd really like to have is "Ambient Air Temperature" (amb temp) which I thought the yaris could do because I thought the sensor for that was in the front in the bumper on the drivers side... oh well. So I have it on intake temp which is no where near outside air temp... Gauge setup:
A- Instant MPG
B- Tachometer
C- Engine Temp in F
D- Intake Temp in F
E- Fuel Level
F- Avg MPG
2010+ Yaris respond to the ambient temp PID (so perhaps ambient will work on them). Pre-2010's don't, so the only way to use the AC's ambient temp sensor is to ask the AC ECU for ambient temp (which is what I do with the YarGauge).
ShinareThread starterOklahoma City, OK · Jan 19, 2011#53That's cool Scott, hence why your gauge will be better suited for the specific use in a Yais. The other complaint I have with the UltraGauge is it's update speed. It is currently once per second, but it sure would be nice if it were a half or a third of that at least (2 or 3 times per second). I would be very happy with 3 times a second. Is that a limitation of the gauge or the CAN bus itself?
Don't get me wrong, I'm loving the new gauge, just saying it could be better.
CTScottUSA, CT · Jan 19, 2011#54 Originally Posted by
Shinare ↑ That's cool Scott, hence why your gauge will be better suited for the specific use in a Yais. The other complaint I have with the UltraGauge is it's update speed. It is currently once per second, but it sure would be nice if it were a half or a third of that at least (2 or 3 times per second). I would be very happy with 3 times a second. Is that a limitation of the gauge or the CAN bus itself?
Don't get me wrong, I'm loving the new gauge, just saying it could be better.
There's a limit with CAN OBD as to how frequently you can send requests. When a device like the Ultragauge is displaying multiple pieces of data at one time (and where some like MPG require 3 separate requests to perform the calculation) they quickly hit the limit. The way around that is to decode the OEM messages that fly across the bus between systems, but that makes it manufacturer specific.
ShinareThread starterOklahoma City, OK · Jan 19, 2011#55 Originally Posted by
henry33 ↑ I know. it doesn't support metrics :( but do you know if they plan to implement it ?
can somebody make a video how the gauge works ?
I took this at lunch per your request:
http://www.youtube.com/watch?v=I7OMv6BrC6c Sorry about the poor quality overall of the cellphone craptasticness, but especially of the driving section, I had the white balance messed up.
(heres a lot better of one than mine I found on youtube:
http://www.youtube.com/watch?v=rWWEiR3Ag0Q)
fatlardchicago burbs · May 12, 2011#56What initial settings did you have to put into your ultra-guage? How did you route the cable and mount it?