cm_ls1Original postOz · Dec 3, 2010#1Finally got all my gear together , well most of it any way, its based on a budget so im not going too crazy, but i want to make sure i get the install right as this is what makes or breaks most systems, hopefully i can get some yaris specific tips from you guys
Anyway here are the speakers- anyone heard of these before?
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 61
sqcompBack at home · Dec 3, 2010#2*
cm_ls1Thread starterOz · Dec 3, 2010#3ahh yes , ive never was into car audio back then, but through researching these you must be taking about the superman series, the ones you here are the first run after those which where also supposed to be excellent
derickveliz2Central, MA · Dec 3, 2010#4Welcome!
Get ready for some FUN!
Derick.
sqcompBack at home · Dec 3, 2010#5*
Palmer812North Carolina · Dec 3, 2010#6Welcome to Yaris World! It is nice to see someone else doing a nice system in a liftback. Derick and SQ have sedans. What other equipment are you planning on using?
cm_ls1Thread starterOz · Dec 3, 2010#7i am trying to get the matching 12" oz matrix elite subs, as you know this company has gone out of business , and not because it had a poor product, luckily i know a store that has some new old stock left, and im getting it dirt cheap.
these subs work well sealed, but are famous for their IB installs, not that i will attempt an IB in a hatch ... sealed i think in 1.5 - 2.0 cubes will do nicely ;)
-now for the front stage, i did a bit of a search and notice a few yaris owners are installing tweets at the top of the door, that sounds crazy to me having a tweeter so close to your ear, maybe there is something to the acoustics that make it work?
I WOULD SAY Probably deep in the dash using windshield reflections, or the pillar firing across at each other, or ultimate path lengths would be kicks but i dunno how much sound would be muffled with shuffling legs and road noise.
as for the mids , im thinking doors , but angleD at least 30 degrees to opposite listener ?
i dunno...
cm_ls1Thread starterOz · Dec 5, 2010#8ive got all the speakers now, subs came in :)
Picture not included in this copy
some more pics-
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
sqcompBack at home · Dec 6, 2010#9*
cm_ls1Thread starterOz · Dec 6, 2010#10sqcompBack at home · Dec 6, 2010#11*
cm_ls1Thread starterOz · Dec 6, 2010#12 Originally Posted by
sqcomp ↑
What other equipment are you using, or planning to use?
my amps just came in as well :) wow these things are sexy !
Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy fnkngrvIn The Hotbox · Dec 6, 2010#13Very clean looking amps....
sqcompBack at home · Dec 7, 2010#14*
cm_ls1Thread starterOz · Dec 7, 2010#15wow thats an amazing coincidence !!! haha
ive got the 2.9 for the splits and 1.1k for the subs, im going to try passive for now , but that 4.5 sure is looking mighty nice haha
actually i just went back and read the thread on your install ...... 🙇
sqcompBack at home · Dec 7, 2010#16*
derickveliz2Central, MA · Dec 7, 2010#17Nice amps... 🎉
Will buy them once my son gets his audi 😉
LOL 😆
D.
cm_ls1Thread starterOz · Dec 7, 2010#18I dont think you realize where im from - australia! And yes my steering wheel is on the right ;)
Anyway a local dealer lost his distribution rights from elletromedia (dont know the details) but he unloaded all his remaining stock at cost price, was hoping for a 5.1k but he didnt have any, so i thought this will do.
Any way, on to the source, its not my ultimate headunit, but i have an alpine 9853 from a couple years ago , its only 2v but it has bass engine pro, 3 way ctive capability, 5 peq, time align etc etc , it will do for the moment untill i get the install done.
Picture not included in this copy
cm_ls1Thread starterOz · Dec 7, 2010#19ok made a bit of progress , started sound deadening the doors, inside and out, covered all service holes (used that plastic sheeting that real estate agents use for their signs- waterproof and light), another nice surprise was the yaris had cables insted of push rods for the mechanism - easy to seal, although i did go over the wiring - hoping never to hve to access it 😆
I thought long and hard at housing the midbass in custom made kickpanels , but the work needed is a bit beyond what i want to take on at the moment, you see being rhd the accel pedal is hard right against the kickpanel and leaves barely any room.
The door opening is at the lower front, near where the kickpanel is anyway just need to get the axis/angle right with an angled spacer , there is quite a bit of room between the door card and the door metal, although these oz's are a good 3" deep!
Picture not included in this copy
sqcompBack at home · Dec 7, 2010#20*
cm_ls1Thread starterOz · Dec 7, 2010#21im actually going to try passive with the 6" first , i have plenty of time to go the kicks later on if i go active ...
thanks for the tip with the foam , is that similar to dynaliner?
Palmer812North Carolina · Dec 7, 2010#22SQ, remember his car is ass backwards. lol! The steering wheel is on the wrong side. That means his gas pedal would be real close to the kick. Very neat job on the Dynamat but you need to do the area where the speaker mounts. On mine I built wood adapters and screwed/siliconed them to the door. Then I covered the entire door skin in Hushmat.
sqcompBack at home · Dec 7, 2010#23*
cm_ls1Thread starterOz · Dec 8, 2010#24 Originally Posted by
Palmer812 ↑ SQ, remember his car is ass backwards. lol! The steering wheel is on the wrong side. That means his gas pedal would be real close to the kick. Very neat job on the Dynamat but you need to do the area where the speaker mounts. On mine I built wood adapters and screwed/siliconed them to the door. Then I covered the entire door skin in Hushmat.
it can still be done , but like you said there isnt alot of space , i did find a pic of one that was accomplished but like i said a bit of work!
Picture not included in this copy ShinareOklahoma City, OK · Dec 8, 2010#25^^ geeze, hope that guy doesn't have big feet like me, heh.
sqcompBack at home · Dec 8, 2010#26*
cm_ls1Thread starterOz · Dec 8, 2010#27 Originally Posted by
sqcomp ↑ We might look into if this OZ speaker can be IB or not. If so, use my technique for the enclosure.
What do you mean , so dont try the door at all? Ive already started, if it sounds like sh*t i will try the kicks, will i need to fibreglass? Ive never done that before.
Oh and palmer - yes ofcourse dynamatted under and around the speaker
Picture not included in this copy sqcompBack at home · Dec 8, 2010#28*
Palmer812North Carolina · Dec 8, 2010#29My speakers sound awesome in my doors. I know kicks would sound better but most people don't want to spend the $$ it takes to do them and I use my car daily as a demo car for my shop. It is nice to see the look on people's faces when you tell them they are listening to 2 6 1/2" speakers in the factory locations, 2 tweeters and 2 10" subs. They can't believe it. I know my car couldn't compete with SQ's but it does sound killer. The equipment is important but the install is more important.
Alien MantisArizona · Dec 8, 2010#30 Originally Posted by
Palmer812 ↑ It is nice to see the look on people's faces when you tell them they are listening to two 6 1/2" speakers in the factory locations, two tweeters and two 10" subs. They can't believe it.
Hey! That's all you need to get the job done!
What more do you want?
😁
cm_ls1Thread starterOz · Dec 8, 2010#31Ok the subwoofers are mounted onto the box - 1.5 cu ft per chamber , and i stuffed them with polyfill ..... I wonder if i should do the subs inverted?
also the angle is about 45 degrees facing the rear glass, what do you think , or should they face rear?
Dammit the there isnt much room in the back, ok the lrx amps are compact but i dont see where im goin to mount them?
Picture not included in this copy
cm_ls1Thread starterOz · Dec 11, 2010#32after much thought and tossing up between the rear seat or the cavity that located where the rear speakers are, i know its a bit daring but might give it a shot, the only thing concerning me, how hot to the audisons get and do they have a loud fan?
Picture not included in this copy
sqcompBack at home · Dec 11, 2010#33*
cm_ls1Thread starterOz · Dec 11, 2010#34i suppose if im in the car driving and its a hot day, i will have the aircon going, thus cooling the amps too.
sqcompBack at home · Dec 11, 2010#35*
cm_ls1Thread starterOz · Dec 11, 2010#36Well alright! Everything went well!
Measured, measured twice, and a third time!
And the i started cutting 😳 , i thought a would need a saw , but a utility knife with a new blade was like cutting through butter and more accurate!
There is some metal sheet underneath that held the rear speakers in place, and that stopped the amps from completely flush mounting, i might remove that in future , but for now it sits level with all 4x mounting points solidly mounted on mdf plank and that solidly mounted to the inside metal frame.
I very happy how it turned out, the only thing the left side amp the logo is upsidown, apparently you can swap the panel over.
All the controls are facing the front of the car for easy adjustments , signal cables go along the drivers side , and power cables along passenger.
Picture not included in this copy
Picture not included in this copy
The only other touch up is to get some rubber trimming around the edges of the panel.
sqcompBack at home · Dec 11, 2010#37*
cm_ls1Thread starterOz · Dec 12, 2010#38Hopefully i will finish it well!
The most critical part i think will be location and aiming of the tweeters.
Im starting to get excited
Oh , we have bling! 🎉
Picture not included in this copy
sqcompBack at home · Dec 12, 2010#39*
Alien MantisArizona · Dec 12, 2010#40 Originally Posted by
sqcomp ↑ No no, I mean on the amplifier. It's unfinished. What are you going to do to give the mounting location some "polish"?
HE SAID HE WAS FINISHED!
Leave the poor guy alone!
Not everyone wants to spend 9 years making a car stereo system!
😁
( you just like torturing people... like poor Derick, huh. )
This poor guy already spent an arm and two legs on that stupid Audison amp!
😢
cm_ls1Thread starterOz · Dec 12, 2010#41nah thats fine... i like the tips and tricks...
how im going to finish the amps? the is a place here called clark rubber, and they sell various size trims , its like a c-shape rubber with i will apply to the edges of where ive cut the rear panel and it will border around the amp nicely...
what are your suggestions?
sqcompBack at home · Dec 12, 2010#42*
derickveliz2Central, MA · Dec 12, 2010#43 Originally Posted by
Alien Mantis ↑ HE SAID HE WAS FINISHED!
Leave the poor guy alone!
Not everyone wants to spend 9 years making a car stereo system!
😁
( you just like torturing people... like poor Derick, huh. )
😢
I'm still trying to find out what does
"PLD" means 🤷
D.
cm_ls1Thread starterOz · Dec 12, 2010#44 Originally Posted by
sqcomp ↑ You know...
...good call. I sign off from offering advice. Ciao.
cmon man , i thought you had thicker skin than that ! 👍
oh derick
PLD = path length difference , didnt know if you where serious or joking around ;)
derickveliz2Central, MA · Dec 12, 2010#45 Originally Posted by
cm_ls1 ↑ oh derick
PLD = path length difference , didnt know if you where serious or joking around ;)
Sorry, some times I make this stupid naive questions!
got it thanks!
but can't you work the
PLDs with Time alignment? D.
cm_ls1Thread starterOz · Dec 12, 2010#46 Originally Posted by
derickveliz2 ↑ Sorry, some times I make this stupid naive questions!
got it thanks!
but can't you work the PLDs with Time alignment?
D.
The brain/ ear combination is pretty powerful, you can trick it into thinking that the sound is coming at the same time with TA , but putting the speakers where the distance to your head is most equal is ultimately going to be better, but in the car environment everything is a compimise anyway so go figure.
sqcompBack at home · Dec 12, 2010#47*
cm_ls1Thread starterOz · Dec 13, 2010#48 Originally Posted by
sqcomp ↑ I'm done. Thicker skin is enough. I'm pulling all my posts. eF this forum. Have fun people.
I DARE you to !!!!!
but if you do.... just know i will be taking over 😈
sqcompBack at home · Dec 13, 2010#49^Done, have fun with the takeover.
Someone tell the mods to pull the sticky. I've already pulled my install log and deadening install pics off. Have fun with your own guidance. Palmer, this forum is all yours.
cm_ls1Thread starterOz · Dec 13, 2010#50Wtf.....
Surely there mustve been some underlying conflict, i mean one negative comment from mantis triggered this?
Im just a noob here, anybody else know what going on, is sqcomp that sesetive?