Yarisworld Archive

What will it take to make 15x7 +27 offset wheels fit Yaris?

7 posts · 6,543 views

marlondogOriginal postLost Angeles · Nov 26, 2010#1
I'm still deciding between the Kreuzers and the RPF1's. Thye only problem is that I can get a better deal on the Kreuzers, but it looks like there is gonna be alot of modding involved. The most I've ever done is had -camber to make certain setups work(205/55 on a 15x6 +40 wheel and a 195/55 on a 15x7 +40 wheel). I just wan't to know if it's worth pulling and rolling fenders and adding camber worth all the trouble just to get some wheels to fit?

Replies 6

ddongbaphay · Nov 27, 2010#2
FYI, 195s on a x7 with a +40 on a 15 inch rim is super conservative, imo. I think if you can put 195s on a +27, you should be ok.

You gotta do RPF-1s though.
TamagoOff Grid · Nov 27, 2010#3
15X7 +27 really isn't that gruesome..
kimonaHuntington Bch, CA · Nov 27, 2010#4
15x7, ET27, with 195's or 205's will result in significant poke up front, which apparently is quite acceptable to some members.
llewellynCanada · Nov 28, 2010#5
I have an '04 Hatch with XXR 522s, 16 x 7 ET 25, w/ 195 50 r16 tires. The fronts poke a touch, and the rears are pretty close to flush with the fenders. They rub hard in the back if there's anyone back there, but by myself it only rubs if I hit a hard bump. I bought coil spring boosters, and that helped a lot. Also, I'm on stock suspension.

http://www.microimageonline.com/foru...ight=llewellyn
ddongbaphay · Nov 28, 2010#6
Originally Posted by kimona ↑
15x7, ET27, with 195's or 205's will result in significant poke up front, which apparently is quite acceptable to some members.
Picture not included in this copy
Diff pokes for diff folks.
Kaotic LazagnaCentral Valley, CA · Nov 28, 2010#7
My rear is effectively +28, 17x7.5". It's right at the fender, I had to roll my rear fender so it wouldn't rub too much. Didn't add any negative camber tho.