Yarisworld Archive

Unforntunate events led to CV boot torn

6 posts · 6,112 views

ezhacker1Original postSan Francisco · Nov 22, 2010#1
The unfornatuate events that led to me finding out my CV boot was utterly ripped all the way around this afternoon.

1. Bottom of Coilover adjuster thingy may not have been tighten all the way
2. A rainy night
3. Looked down from the road for a second
4. Hitting a big pothole at 40 mph straight on Friday night



Basically the bottom of the coilover adjuster thingy I assume got jarred loose from the pothole then ongoing vibrations from driving loosen it further and finally sat ontop of the shaft basically be a lathe and started chewing up the coilover piece.




Let this be a lesson to everyone... i now have zipties preventing the other side from coming dropping loose, at the very lease it will vibrate loose but not continue to loosen.

Now i have to wait / drive a 91 Corolla Wagon till the boot to arrive from TRD Sparks, I figure go OEM.

I HOPE this all happened friday night, theres no sound from turning after i fixed the coilover thing.

Replies 5

tomatoSan Francisco Bay Area · Nov 23, 2010#2
Nasty :(
Good luck with the repairs!
ezhacker1Thread starterSan Francisco · Nov 23, 2010#3
Im glad i caught it early, tho i cant know for sure i did catch it early, it is most likely started with the pothole on friday.

Any tips for repairs? I know how a PITA it is to just install the boot...labor intensive
MadMaxSan Antonio, Texas! · Nov 23, 2010#4
I had the same thing happen when I hit an armadillo in Arkansas in 1985 with my year-old Honda Accord hatchback...

Good luck with the repair!

Cheers! M2
CTScottUSA, CT · Nov 23, 2010#5
Originally Posted by ezhacker1 ↑
Im glad i caught it early, tho i cant know for sure i did catch it early, it is most likely started with the pothole on friday.

Any tips for repairs? I know how a PITA it is to just install the boot...labor intensive

There are aftermarket "repair" boots that glue together and don't require pulling the axle to install, but I've heard mixed reviews on the longevity of them. I would pull the axle, completely degrease the joint (to remove any contaminants that got in with the ripped boot), re-grease, and replace the boot. Pulling an axle is not that bad, other than breaking the axle nut loose. You need a 30mm socket for the axle nut and a tool to "un-dent" the axle nut to allow it be rotated. It has a dent that acts as a locking mechanism.
ezhacker1Thread starterSan Francisco · Nov 23, 2010#6
im gonna purchase an OEM one from local dealership, and take it to my mechanic buddy to fix it for $60 plus $30+tax for the boot kit. I dont trust myself to do something like this. I read up on split boots, i dont trust those either.

Ironically i had thought the pothole destroyed my shock seeing all that grease, but it wasnt pink no way it got all dark that fast.