Faraz_ShaikhOriginal postPakistan · Nov 15, 2010#1Finally the project has been completed and turbo has been installed in my ride after very hard work and experiments.
Engine is 1szfe
Turbo is Garrett T28
SSqv Bov
Return line made for installing FPR
225cc injectors
Top mount intercooler
Battery has been shifted to trunk
Hks Fcon Mini
Hks Afa
Boost i'm running is 8.4 Psi
The car has been tuned through wideband and the AFR was 10.5 to 11
Pics are attached below
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 34
N3misiSSouth Africa · Nov 15, 2010#2What is the power your are making?
F\A is on the Spot
xbgodFlorida · Nov 15, 2010#3Thats a tiny intercooler. Won't be surprised if you dont get heat soaked. and with it's location I hope you have a hood to support it's off-side placement. Also looks like you got in a hurry towards the end of your project. not sure if all of this was well thought of before you placed things. Parts of it just look messy and not finalized. I think your intercooler size and placement will be an issue.
I'm not not knocking your efforts, I just think part of its not well thought through or finished looking.
XBG
turboecho2005Ottawa, Ontario · Nov 15, 2010#4I see nothing wrong with your intercooler placement. Remember this motor is only a 1L. The IC is an ok size. Having one too large and more piping will only result in turbo lag. You're current setup looks fine. Keep up the good work.
xbgodFlorida · Nov 15, 2010#5placement of that intercooler will be fine...............as long as you can get air into it. And i'd rather have a little lag than heat soak.
XBG
Faraz_ShaikhThread starterPakistan · Nov 15, 2010#6thanks
if you people have noticed so i have installed a powerful fan just below the intercooler which clears the heat thing issue.
As far as the performance is concerned so its going much better, we are having no dyno machines here but i think its making around 110 to 120 whp
why?harnett county NC · Nov 15, 2010#7wow, that is pretty cool, i wonder how much lighter your model is, compared to ours.
Faraz_ShaikhThread starterPakistan · Nov 15, 2010#8@ why
dude no idea
cali yarisCanoga Park, CA · Nov 15, 2010#910.5 to 11 is a little rich!
xbgodFlorida · Nov 15, 2010#10I think your AFR is fine 10.5-11 really isn't that fat, better than running lean. If you were in 13's i'd say you were to rich but your number is very common. You could lean it out a little to 8.5-9 and still be safe but lets not detonate.
My one pet-peve clean up your pipping, Looks messy. Use more aluminum pipping and a weld bung for your BOV, V-Band if possible. Just looks like you ran out of time or patience.
XBG
cali yarisCanoga Park, CA · Nov 15, 2010#11 If you were in 13's i'd say you were to rich but your number is very common. You could lean it out a little to 8.5-9 and still be safe but lets not detonate.
You're going backwards man, lower numbers are richer, and 10 is pig rich, not good for the motor.
Faraz_ShaikhThread starterPakistan · Nov 16, 2010#12thanks for your comments and views
actually the thing is i'm first person who has installed turbo in yaris, few people have imported yaris which already have turbo kit in it , but i have been through many experiments thats why the work is lil messy, soon ill go for almunium piping so i could have a better look in engine bay.
I had to do different experiments to make this project sucessfull, secondly as far as i think the AFR is ok
another point which i'd like to share is that, car was not getting tuned by earlier , i used to disconnect o2 sensor so the car used to get rich, without boost like below 3000 it used to be very rich and as the turbo spools it used to be perfect, and if i used to run car with o2 sensor so it used to be lean all the time but like for 3 days i didnt disconnect the o2 sensor and used to do normal cruising but yesterday i made a try, i ran car with the o2 sensor the car was perfect, in all 3 gears it was perfectly awesome. i asked my tuner he said your car has been tuned automatically via o2 sensor.
Later i made another bunk next to o2 sensor for checking the afr, the afr was 10.5 to 11, when i disconnected the wideband sensor from that bunk the car again was in old situation, was in lean with o2 sensor so now i have again closed that extra bunk in manifold which i made for checking afr and now o2 sensor is connected.
So now my question is that will o2 sensor again tune my car automatically and control the fueling accordingly ?
henry33slovakia · Nov 16, 2010#13hi man good work !!! really admire you !
xbgodFlorida · Nov 16, 2010#14Damn-it Cali your right "spent to much time in the sun" reverse what I said.
Brain-Fart
XBG
Bluevitz-rsOshawa, Ontario, Canada · Nov 16, 2010#15 Originally Posted by
xbgod ↑ I think your AFR is fine 10.5-11 really isn't that fat, better than running lean. If you were in 13's i'd say you were to rich but your number is very common. You could lean it out a little to 8.5-9 and still be safe but lets not detonate.
XBG
Originally Posted by
cali yaris ↑ You're going backwards man, lower numbers are richer, and 10 is pig rich, not good for the motor.
X2
It's a ratio of Air:Fuel not Fuel:Air
Faraz_ShaikhThread starterPakistan · Nov 16, 2010#16thx henry :)
cali yarisCanoga Park, CA · Nov 16, 2010#17 secondly as far as i think the AFR is ok
ok -- great project, best of luck with it, but I can't be helpful to anyone who maintains that 10.5 AFR isn't rich.
Faraz_ShaikhThread starterPakistan · Nov 16, 2010#18so you think 10.5 is rich ?
Focus_Sh1ftNew Jersey · Nov 16, 2010#19I definitely agree, 10.5 is too rich.
11.5 is mostly accepted to be the money spot for FI engines. I'm amazed you're even running at all that rich, as I recently had a problem with my tune where it would drop me to 10 and the engine would stutter BADLY.
I set my tune up to reach 11.5 by 5 PSI of boost, and linearly approach it as soon as boost is entered.
Anyways, congrats on the install. Could definitely use some cosmetic work though 😛
Faraz_ShaikhThread starterPakistan · Nov 16, 2010#20lol ok
well could you answer my question which ive asked in this topic regarding o2 sensor
Focus_Sh1ftNew Jersey · Nov 16, 2010#21I'm not entirely sure what you're asking, but here's my experience with our O2 sensor:
I drove around for about two months without a tune, letting the O2 sensor handle all the fueling. While in closed loop, it was always successful of maintaining stoich, even while in boost.
Eventually something strange happened, whereby the ECU threw the car into open loop at all times. No CELs or anything associated with it either. The car would quickly lean out during boost (I saw 15+ and it was continuing to climb), so something had to be done. I decided to just pull the O2 sensor and tune the car in open loop. Worked like a charm, drives great, and is very tunable.
In retrospect, I think what happened was the ECU was witnessing negative fuel trims (adding fuel) that exceeded the malfunction threshold (-20%). As a failsafe, it determined open loop should be used. I'm not sure why it didn't throw a code though (however P0101, the code I did have at the time, does have a connection to fuel trim - so that could be it). I could have tested this theory by resetting the ECU but said screw it and tuned the car in open loop instead.
Faraz_ShaikhThread starterPakistan · Nov 17, 2010#22well thanks for sharing your experience i think o2 tunes itself so id let the o2 control the fueling
TamagoOff Grid · Nov 17, 2010#23 Originally Posted by
xbgod ↑ I think your AFR is fine 10.5-11 really isn't that fat, better than running lean. If you were in 13's i'd say you were to rich but your number is very common. You could lean it out a little to 8.5-9 and still be safe but lets not detonate.
XBG
wow dude, you prove yet again that you have NO IDEA WHAT YOU'RE TALKING ABOUT.
to the OP, i ran a top mount on my setup and dropped 20degs F through the intercooler. it was a 3" saab unit, and worked perfectly.
Originally Posted by cdydjded ↑
I said to myself yesterday, the word "topmount" is like bait to Tamango & sure enough he strikes again.......
😆 I almost got in trouble at work from laughing so hard. Lol he has been gone for awhile. Welcome back.
TamagoOff Grid · Nov 17, 2010#25 Originally Posted by cdydjded ↑
I said to myself yesterday, the word "topmount" is like bait to Tamango & sure enough he strikes again.......
it's TAMAGO
and my topmount worked great.. i know from personal experience, not from watching youtube videos of other people's failures.
TamagoOff Grid · Nov 17, 2010#26 Originally Posted by cdydjded ↑
Its CDYDJDED, now that that's cleared up, Im sure you topmount worked great. Im sure others have failed. I would just like to know of 1 company that sells a I/C that goes from front mount to top mount. I can find many that go from top mount to front mount. I just find it amazing that you cant accept that the majority of turbocharged vehicles use front mount systems not top mount.
subaru and toyota use front mount.
toyota and volkswagen use side mount.
when i turbo the MR2 i'll use a heat exchanger front-mounted for my water/air cooler..
some things make more sense than others.
xbgodFlorida · Nov 18, 2010#27I think I stated instantly My mind was working backwards for that molment and retracted that statement. You Ass-Tard
3 attachments not included in this copy
xbgodFlorida · Nov 18, 2010#28I can't wait to run into you at an event...........😈
Come on guys no threats. They gonna think all of us Fl guys love to fight lol
xbgodFlorida · Nov 19, 2010#30Thats not a threat, thats wishfull thinking.......😁
ShinareOklahoma City, OK · Nov 19, 2010#31Wow, I got no Turbo, but I'm reading this thread just for the entertainment! :)
TamagoOff Grid · Nov 20, 2010#32 Originally Posted by
xbgod ↑ I can't wait to run into you at an event...........😈
December 5,
www.gulfcoastautocrossers.com there, now you won't have to guess where to find me.
better bring your driving panties..
Nexus1155Dorchester · Nov 20, 2010#33Top mount would be preferable on these engines. I mean look, some people even ran WITHOUT an intercooler, for some power it's okay, but for what people were trying to do was trying to squeeze max power from a non intercooled engine. Always want to intercool to take away more risk of detonation.
With that being said, why would you want to run an extra 4 feet of piping to the front and back around the engine for what? Pressure drop? Easier to hack up a $100 hood and make a proper cooling duct for a TMIC than to mess with shaving supports in the front or frame work. The tmic depicted is perfect for this application.
Also ive been tuning a few DSMs lately, running as rich as 10AFR and as lean as 18 at cruising and 30 at idle. Needless to say i fixed that issue quick. 11.5.7 12.2 at wot. cruising and idle is around 14.7, 15.2.
The more common UEGO gauge reads only to 10-17, 10/10.5AFR being the lowest i would allow a car to run, yes rich, but i don't think rich enough to mess up piston rings or anything. The kids been doing pulls all year on his stock pistons, no issues ever.
Faraz_ShaikhThread starterPakistan · Nov 20, 2010#34thanks for clearing issues nexus
id like to draw your attention towards my question regarding o2 sensor, could you please clear up issue
car was not getting tuned by earlier , i used to disconnect o2 sensor so the car used to get rich, without boost like below 3000 it used to be very rich and as the turbo spools it used to be perfect, and if i used to run car with o2 sensor so it used to be lean all the time but like for 3 days i didnt disconnect the o2 sensor and used to do normal cruising but yesterday i made a try, i ran car with the o2 sensor the car was perfect, in all 3 gears it was perfectly awesome. i asked my tuner he said your car has been tuned automatically via o2 sensor.
Later i made another bunk next to o2 sensor for checking the afr, the afr was 10.5 to 11, when i disconnected the wideband sensor from that bunk the car again was in old situation, was in lean with o2 sensor so now i have again closed that extra bunk in manifold which i made for checking afr and now o2 sensor is connected.
So now my question is that will o2 sensor again tune my car automatically and control the fueling accordingly ?
H3LlIoNMidatlantic · Nov 25, 2010#35This thread is full of douche.
OP - It should...what you are describing sounds like the ECU going back and forth between open and closed loop modes, so if everything is plugged back in, it should take back over. Also, you don't have to remove the AFR sensor you added, as it should not interfere with your O2 sensor.
As for your install, it's a mess, but I'd imagine you probably don't have the resources there that we have here, so congrats on getting it together and running man. Keep it up.