Replies continued
Daddie YThread starterLos Angeles, CA · Jan 12, 2011#51 Originally Posted by
Kioshi ↑ Nice model.
Love the front logo, looks clean and very original!
We have a Blazing blue with widened steelies up here, You guys should meet and discuss future plans.
He was the first we've seen.
teamwork~
Thank you!
Really, nice. post up pic. How wide did he go?
KioshiFremont, CA · Jan 12, 2011#52he attended our meet in July with the widened wheel surprise...let me link you to the thread w/ Kaotic's pics of it~
KioshiFremont, CA · Jan 12, 2011#53 Originally Posted by
Daddie Y ↑ Thank you!
Really, nice. post up pic. How wide did he go?
As promised......Pur Blu is the name of the owner...and his post has the specs.
Davenport Beach Meet Pics Daddie YThread starterLos Angeles, CA · Jan 13, 2011#54Nice!!!
wildmongoose26Dallas, TX · Mar 28, 2012#55 Originally Posted by
Daddie Y ↑ I don't even know the offset nor the shop I did it at. They don't go by offset, it was all done by measurement. They do things old school.
I can find out the offset by measuring and calculating it myself, but why should I go through the hassle. I am happy with my set up.
Iono, maybe to help further the community a bit more? If you want to go off of your "custom" measurement then what is the backspacing that they measured?
Getting new wheels and it would be nice to know how wide and offset on those. I can assume if its a 10" wheel then its at least a 40-45offset
SAV912Savannah, GA · Mar 29, 2012#56^ Picture not included in this copy
I don't think Daddie is even on widened steelies anymore. IIRC, he's on wheels that can also be found on a new Shelby Mustang or Lamborghini Gallardo.
-C
turboecho2005Ottawa, Ontario · Mar 29, 2012#57i love those white rims :) reminds me of vw corrado widen steelies
wildmongoose26Dallas, TX · Mar 29, 2012#58They arent the same wheels. They are rotiform cast 1 piece wheels. Just find it annoying he is keeping his custom (more then likely diamond racing) info from everyone. Where it might give some inside to those who actually care to know on exactly how much room is back there for inner clearance
Daddie YThread starterLos Angeles, CA · Mar 30, 2012#59I am still on steelies. The steelies are custom made. Rear: 16X10 Front: 16X8. Offset: Unknown!!!
Daddie YThread starterLos Angeles, CA · Mar 30, 2012#60SAV912Savannah, GA · Mar 30, 2012#61 Originally Posted by
wildmongoose26 ↑ They arent the same wheels. They are rotiform cast 1 piece wheels. Just find it annoying he is keeping his custom (more then likely diamond racing) info from everyone. Where it might give some inside to those who actually care to know on exactly how much room is back there for inner clearance
I don't think you grasp that he's probably sponsored. They don't pay him to give him info so he can replicate what they do on the cheap. They pay him to wear his wheels without asking questions. 🙂
Yeah, it sucks that he isn't telling you what you want to know, but he isn't telling you what you want to know because HE doesn't know. Contact a shop and go by the measurments he HAS posted and maybe you can hit somewhere close on what he did.
-C
wildmongoose26Dallas, TX · Mar 30, 2012#62Sorta helps and sorta doesnt. Thought about going wider since he is stock bodywork and i'm not. i'll just give on trying to get any help from this guy. ha
SAV912Savannah, GA · Mar 30, 2012#63 Originally Posted by
wildmongoose26 ↑ Sorta helps and sorta doesnt. Thought about going wider since he is stock bodywork and i'm not. i'll just give on trying to get any help from this guy. ha
I remember in your last thread that you widened the rear fenders, but I don't remember by how much and I'm too lazy to go dig it up. Maybe try adding that to the width of his rears and that should give you at least a vague starting point. 15 or 16"x10+your widened fender width?
Or hell, just grab some adapters and source some Dodge Viper rear wheels. They wear 335s IIRC. It sounds like that's somewhere close to wide enough. lol
-C
cali yarisCanoga Park, CA · Mar 31, 2012#64 I don't think you grasp that he's probably sponsored. They don't pay him to give him info so he can replicate what they do on the cheap. They pay him to wear his wheels without asking questions.
One thing I did for my sponsors was to help interested people become the sponsor's customer by telling them how much the parts (or service) cost.
The sponsors like that.
Here is the rest of the information, including the phone number:
Pico Wheel Service
13149 Sherman Way, Unit A
North Hollywood, CA 91605
(818) 982-0375
wildmongoose26Dallas, TX · Mar 31, 2012#65Hard to source the work when they cant "custom measure" the fenders and backspacing. So....if i know he has a 10" and has a +48 then i know i can run a 12"+48 or, 10"+24 or 11"+36, etc.