T PexxOriginal postIllinois · Nov 5, 2010#1Alright so i've been waiting to find some stuff about this yaris S model.
Is it possible to attach an 08 yaris s lb 3dr front and rear lip kits and sideskirts to just a stock 08 yairs lb 3dr?
Replies 9
yaris2010RSAngus, Ontario · Nov 5, 2010#2if its the same as my 2010 not really, slots need to be cut in the stock bumper and a hole was cut in mine (for the bottom vent)
yarisugiハワイ · Nov 6, 2010#32008 Yaris S LB lip kit on a 2008 stock Yaris LB? Yes, you can!
I did.
yaris2010RSAngus, Ontario · Nov 6, 2010#4 Originally Posted by
yarisugi ↑ 2008 Yaris S LB lip kit on a 2008 stock Yaris LB? Yes, you can!
I did.
it depends on the 08 kit, different regions got different kits
yarisugiハワイ · Nov 6, 2010#5Looks like he is from Illinois, so it's good. As long as it's 2008 S --> 2008 and not 2009+ S --> 2008
The S lip kit would look like the image below.
Picture not included in this copy
Picture not included in this copy
T PexxThread starterIllinois · Nov 7, 2010#6looks good. where can i get a set? part numbers?
kimonaHuntington Bch, CA · Nov 7, 2010#7 Originally Posted by
T Pexx ↑ Is it possible to attach an 08 yaris s lb 3dr front and rear lip kits and sideskirts to just a stock 08 yairs lb 3dr?
Yes, the one in the photo above will fit 06-08 no problem.
BTW, I'm looking for a front lip and rear hatch spoiler like that, in red.
yarisugiハワイ · Nov 8, 2010#8T PexxThread starterIllinois · Aug 3, 2011#9still looking for a cheap kit! does anyone know if there are any replica ones out there?
SAV912Savannah, GA · Aug 3, 2011#10No, there are not a lot of replicas out there. There's the Kaminari front lip. If you want a kit that bad, you'll either have to order from Toyota direct, search you-pull yards for crashed Yaris S models from '07 or '08 (which is a number between none and never, just about) or find somebody on here willing to trade or sell off. Yarisugi already posted the parts numbers for you above in a link. Your best, and probably only bet is to start there.
Then you'll have to pay to paint, prep, punch the holes in your bumpers, and install. Not exactly the cheapest process out there.
-C