Yarisworld Archive

Fog Lights/Gauges

27 posts · 12,046 views

.Kevin.Original postPrince George, BC. Canada · Oct 30, 2010#1
Some questions

1. Is it possible to buy some at Canadian Tire or just some mountable ones in general? Or do I have to get the stock ones?
2. What exactly does a kit need in order to be put on if I CAN just buy random ones.

pluses of stock compared to randoms?

I just dont wanna pay 800 dollars for this. Seen a cheap ass 'kit' 12.99 lol was tempted to buy it and just see if an auto shop can put it on.

Same with gauges oil etc can I just buy random ones and have a shop install em?

Replies 26

FreedanSan Diego, CA · Oct 30, 2010#2
If you have the money, a shop can install virtually anything for you. But if you are low on funds, you might want to look up on how to install the part/items yourself or know someone that can do it for free.

Here is the DIY from MicroImage forums:
http://www.microimageonline.com/foru...ght-Instal-PDF

Good luck out there.
fnkngrvIn The Hotbox · Oct 30, 2010#3
Your biggest concerns for fog lights will be:

1) Should be designed for the car (IE, comes with a wire harness that preferably is plug-n-play with factory stalk)
2) Comes with actual OEM or OEM certified bezels so you don't have some wonky fitment issues
3) Decide if you want Angel Eyes. If you do then be sure they provide you with enough wire length so that you can tie them in where you want (IE, I tied mine to my parking lights)
4) Decide if you want sealed beam projectors, replaceable bulb style, or replaceable H4.
5) Make sure they come with an OEM switch. A lot of them out there will not.
6) Decide if this is merely cosmetic or for functional use.
7) Decide if you want fixed position or adjustable beam. I have seen both.

As for installation you really shouldn't be paying more than a couple hundred bucks for labor if you don't do it yourself. If you decide to do it yourself be prepared to take off your front bumper cover, route the wire harness in the bay, route the switch wiring through the firewall, and take apart panels of your interior. Not that big of a task however pretty much if you haven't done this stuff before set aside say 3-4 minimum. If you have done this type of stuff before then there is no reason why you can't get it done in 2 hours.
fnkngrvIn The Hotbox · Oct 30, 2010#4
What are you talking for gauges?
.Kevin.Thread starterPrince George, BC. Canada · Oct 31, 2010#5
The guy at Canadian tire said all their gauges and foglights are universal I was talking about those, if they can be fitted on by a shop?
why?harnett county NC · Oct 31, 2010#6
if you are going to pay someone to put them on, they'll do it. Just make sure they do it right.

It is possible to put any fog light for any vehicle on to any other vehicle, it just could cost a ton to make them look good.
.Kevin.Thread starterPrince George, BC. Canada · Oct 31, 2010#7
Hmm I guess I need to find a good shop
fnkngrvIn The Hotbox · Oct 31, 2010#8
what brand gauges are you looking to purchase?
cali yarisCanoga Park, CA · Oct 31, 2010#9
buy foglights made for the car, or you have a project on your hands and it will never look as good.
fnkngrvIn The Hotbox · Oct 31, 2010#10
Originally Posted by cali yaris ↑
buy foglights made for the car, or you have a project on your hands and it will never look as good.
+10000000000
FreedanSan Diego, CA · Nov 1, 2010#13
Kevin, the kit Garm sells is pretty much plug and play. Read the DIY installation guide I linked and get a bag of zip ties. Zip ties are your best friend when working on cars. Zip ties are so useful that it should be a crime to sell them for so cheap.
.Kevin.Thread starterPrince George, BC. Canada · Nov 1, 2010#14
I wanted to buy his the problem is we dont have communication quick enough so I just buy other shit.

I've never done electronics on a car myself, as for zip ties I got them all over the place.

EDIT:

Saw guide, dont have the balls to do it. Would send garm the money in the mail if we could get this done with already then I'd take the kit to the dealer but it just doesn't happen.
FreedanSan Diego, CA · Nov 1, 2010#15
Those rectangle fog lights might look good if you cut a spot for them on your lower grill. That's the thing about universal fit items, you'll have to either mod the item or mod your car to make it fit.

Waiting a few weeks to get something that will work is probably better than getting something now and having to spend extra money to get it to work.

Since you aren't doing the work yourself, the cost of moding your bumper and installation of the light kit might be steep.

Though, sometimes it's better to just take the plunge and do things yourself. My Yaris is the only car that I've ever modded. I did the normal maintance, oil/filter/etc, on my other car but not to the extent of adding lowering springs, AFE intake, sway bar, medalion muffler.

(I got the AFE intake and Medalion Touring Muffler from YamilaR in a trade for my OEM springs and OEM muffler, thanks again!)

I do think that Fog Lights will be on my to-do list, after I get a Turbo Installed/running.

Go before Show right? 😆
.Kevin.Thread starterPrince George, BC. Canada · Nov 1, 2010#16
Was thinking of putting them in the lower grille - between the fog light slots at the far sides and just having the shop cut the plastic on it and place them in there which should lead to it fitting nice. And I rather pay for a sweet different job than do the dealers 1 grand offer for absolute boringness same old.

If I pay that much may aswell make use of it.

You mean the ultra white ones right>?

And anyone know if those gauges are installable aswell?
FreedanSan Diego, CA · Nov 1, 2010#17
Yep, I got the 23mm Ultra Racing rear sway bar. As for the guages, they should be all work just fine.

That's what's so great about the Yaris, driver side glove(?) box is just begging to be used for guage installation.
.Kevin.Thread starterPrince George, BC. Canada · Nov 1, 2010#18
I meant you said the square ultra white lights work lol

and cool I'll buy those now to find a shop to put all this shit on nicely.
FreedanSan Diego, CA · Nov 1, 2010#19
They should work just fine. Post some pics when you get it done.
.Kevin.Thread starterPrince George, BC. Canada · Nov 1, 2010#20
Alright sweet, any idea how much shops charge for this crap?
FreedanSan Diego, CA · Nov 1, 2010#21
No clue. 😆

Just don't get the dealership to do it. Those guys will rob you blind.

It's just that when I install my foglights, I would probably just splice the fog lights into my head lights directly. You know, left fog with left head light and right fog with right head light.

Worst case scenario is that my lights blows up. 😛
.Kevin.Thread starterPrince George, BC. Canada · Nov 1, 2010#22
Well I'll see if they can just cut the plastics in the fog light slots and fit these if not chop the centre bottom grill and fit em then wire to whatever they reccommend, I'm pretty sure these kits come with switches.
FreedanSan Diego, CA · Nov 1, 2010#23
Yeah, I just don't trust myself with switches. I just know that I'd forget to turn off my fog light and will need a jump start later. 😆
.Kevin.Thread starterPrince George, BC. Canada · Nov 1, 2010#24
Lol they can prob wire it to the headlights so they turn on and off same time or switch, not sure which is better so I'll try to ask.

All I found so far was an Auto Body shop that restores cars from collisions etc is this the type of shop that does this stuff?
FreedanSan Diego, CA · Nov 1, 2010#25
Only way to find out if a shop does certain installation is to give them a call. Some do, some don't. Get quotes from multiple shops than go to town. 👍
fnkngrvIn The Hotbox · Nov 1, 2010#26
Originally Posted by .Kevin. ↑
I wanted to buy his the problem is we dont have communication quick enough so I just buy other shit.

I've never done electronics on a car myself, as for zip ties I got them all over the place.

EDIT:

Saw guide, dont have the balls to do it. Would send garm the money in the mail if we could get this done with already then I'd take the kit to the dealer but it just doesn't happen.
Why don't you actually order through Garm's shop online? He takes Paypal and CC so you have multiple options for payment. 🤷
.Kevin.Thread starterPrince George, BC. Canada · Nov 1, 2010#27
No credit card, I'd have to send it in the mail like I did with sleey0 but he jipped me lol not saying garm will, if he would of responded like 4 weeks ago I'd have fogs. Figured I may aswell just get some custom stuff.