Yarisworld Archive

how do you remove this brake Drum?

16 posts · 4,714 views

jamal1984Original postGeorgia, USA · Oct 26, 2010#1
this is on my gf chevy aveo, and yeah i been banging this thing for like hour, still no result.
Id been googling for repair manual, even under daewoo but nothing come up.

3 attachments not included in this copy

Replies 15

AltitudeColorado · Oct 26, 2010#2
I'm guessing you pop that center cap off and there will be a large nut holding it on.
SailDesign. · Oct 26, 2010#3
I think you'd get further if you at least removed the dust-cap, and some of the mechanical sh!t inside it. Things that wheels are bolted to do not usually come off with just a few bangs from a hammer.....

<sigh>
.Kevin.Prince George, BC. Canada · Oct 26, 2010#4
Chevy aveo is the problem help her fix it lol
DARK AGE 53Alabama · Oct 26, 2010#5
I vote removing the dust cap also.
jamal1984Thread starterGeorgia, USA · Oct 26, 2010#6
that's what i thought guyys, but i'm trying to use all kind of stuff to pull it out, turn it in clockwise and counter, but that dust cap feel like gorilla glue in there.
rningonfumesSoCal · Oct 26, 2010#8
Have you tried releasing the brakes (after making sure the car won't go anywhere), then taking a mallet or hammer and giving it a few good wacks?

The next resort after that would be to take the appropriate size bolt that fits into that hole on the right-middle of the first pic and forcing it off that way.
p123456789dirty south · Oct 26, 2010#9
use a small screwdriver and a hammer, pound the screwdriver between the dust cap and the drum and pry it out there will be a cotter pin with a nut behind that. After removing the cotter pin and the nut the drum should come off.
silver_echoSpokane, WA · Oct 26, 2010#10
Originally Posted by p123456789 ↑
use a small screwdriver and a hammer, pound the screwdriver between the dust cap and the drum and pry it out there will be a cotter pin with a nut behind that. After removing the cotter pin and the nut the drum should come off.
correct, that is what i would do as well... don't pound too hard, but yes...
.Kevin.Prince George, BC. Canada · Oct 26, 2010#11
Anyoen notice by the way how it says BAD on the left side.
FSANENY · Oct 27, 2010#12
make sure the E-brake is off.
djct_wattThailand · Oct 27, 2010#13
^I was guilty of making that mistake once
FSANENY · Oct 27, 2010#14
me too
jamal1984Thread starterGeorgia, USA · Oct 27, 2010#15
thank you all for the tips will try again later today, and yes what is that BAD red word mean?
firemachine69Sudbury, On · Oct 27, 2010#16
Manufacturing code.

I must say, that drum looks to be in mint shape. Usually they're rusty a couple days after delivery.


Last I recall, you had to remove the axle nut (underneath the grease cap) to remove the drum, but I may be thinking of another car...