Yarisworld Archive

Steelies dust center cap

8 posts · 5,924 views

SimTronikOriginal postSts-Anges, Quebec, canada · Oct 20, 2010#1
Hi, after searching in so many places and on ebay... can't find the center caps for steelies like the image below.

Picture not included in this copy

If its available in your area and you can buy me four of them, i could pay you via paypal. Would be much apreciated.

I found this: http://cgi.ebay.ca/ws/eBayISAPI.dll?...=STRK:MEWNX:IT but not sure it will work.

Replies 7

33OHDover, Ohio · Oct 21, 2010#2
That is YAR1S's car. She got them at NAPA. They do require a little modification to fit.
SimTronikThread starterSts-Anges, Quebec, canada · Oct 21, 2010#3
yeah. case close i finally got a napa guy willing to search instead of telling me that they sell no wheel so they dont have part like that.
CTScottUSA, CT · Oct 21, 2010#4
That's because they are trailer hub grease caps. The two closest sizes are 1.980" and 2.44", which are too small and too large. I believe that the people who have used them bought the 1.980" ones and wrapped the insert end with tape to make them fit. The Yaris bore is 54.1mm, which is just shy of 2.25".

Here's an example of the trailer hub grease caps:

http://www.carolinaboatoutfitters.co...ap1980-p-73992
SimTronikThread starterSts-Anges, Quebec, canada · Oct 22, 2010#5
yeah thats what i bought but what you think of the ebay link i posted with hex nuts.. would this work too ?
CTScottUSA, CT · Oct 22, 2010#6
Originally Posted by SimTronik ↑
yeah thats what i bought but what you think of the ebay link i posted with hex nuts.. would this work too ?
No. Those look like they are for something very specific, but the only way you could mount them to your steelies is to somehow glue them on.
SimTronikThread starterSts-Anges, Quebec, canada · Oct 22, 2010#7
ishhh lol I just notice (cuz i'm currenntly painting them) that in the rear there is already dust covers.