Originally Posted by camelll ↑
Well then I would tend to believe it lies with the wiring of the fuel injectors, but I would make sure all the connections are good and correct. What did you use to make the connections? Solder or wire taps? Another thing that would help out with diagnosis is to set the selector switch to low, put the key in the on position but do not start the car and depress the gas pedal. You should hear the electronic clutch engage and the lights on the selector switch and fuel controller should come on. The clutch engaging is a pretty loud audible click. If you have a buddy with you then have him watch the clutch and light on the fuel controller if not then find a stick or something to depress the accelerator pedal.
If one of these is not occurring then something in the wiring is not right, but if they do come on it could still be a wiring issue but for the stalling I would tend to think it is a vacuum problem.
Another thing to try and post the results would be to turn the selector switch to off, clear the misfire code and drive the car somewhat hard like you still have the sc on. If you do not get misfire or the car does not die at a stop then I would lean toward wiring but if you still get the problem then I would say vacuum leak. Also if you are getting a misfire your cel should blink first and if it keeps detecting misfire it should throw a code. If you only get this in boost I would certainly think wiring.
A couple of more questions, did you buy this kit new? If not is a retrofit from an XB or is it a yaris kit? The wheee sound, is it more like a screeching metal on metal sound, a belt squealing sound or an air sucking sound? Was the misfire code the same cylinder or different cylinders?
First of all thanks to everyone for their suggestions and input!
Hi Camell
1) The kit is brand new from Garm...for the Yaris.
2) The whee sound is like the sound of a whistle...but constant..wheeeeeee....many people have suggested the belt but my buddy says its the right tension..something about the 45 degree/90 degree turn? Also, he said if it was the belt it would squeal all the time regardless..it only squeals when i am idle or cruising - not when gas pedal is depressed.
3) The misfire code was coming from cylinder 1 i believe.
4) The wire connections were soldered and based on the diagrams posted by other members with sucessful installs. It was also supposedly triple checked.
5) When driving with the S/C on low i can see the clutch on LED light up...i can also hear the turbine? spin and the added power. After some time the car would stall (battery light is on and air bag light) or shut off completely (brake pedal is hard). Once i restart the car everything is fine.
6) Today when i got the CEL cleared and when it came back on was when i was driving with the switch set to off. After the stalling i have been driving with the switch set to off. Seems like the car only stalls when i have the S/C on.