Yarisworld Archive

4AGZE Modification

20 posts · 10,280 views

CrzyCrgOriginal postSouth Africa · Oct 18, 2010#1
Alright, here's the deal... I want to drop Toyota's 4AGZE engine into my Yaris. Does anybody have any idea how much different the mounts are? Also, some advice on a gearbox would be appreciated. I'm not too fussed about management etc because I'm going third party there. The only difficulty here is to get all the information to the heads up display. Will I have to change the dials from digital to analogue or is it possible to leave the sensors and what not where they are and just use the stock computer? I have a fair knowledge of programming, so if any is needed, with some research, time and patience, I can work it out. I just want to know where to start.

Shotalot!🤘

Replies 19

fnkngrvIn The Hotbox · Oct 18, 2010#2
I think that there has been someone in Greece that did a Toyota 3S-GTE too. Your best bet is to do a search in the forum for either motor swap or engine swap. With that search you will find a few threads that you should find very useful.
CrzyCrgThread starterSouth Africa · Oct 18, 2010#3
Thanks! I just got some info from another guy here in South Africa and he says that the 1ZZ-FE is probably the best way to go...
CrzyCrgThread starterSouth Africa · Oct 18, 2010#4
Any other ideas?
fnkngrvIn The Hotbox · Oct 18, 2010#5
Originally Posted by cdydjded ↑
The 2ZRFE 1.8 would be a direct drop in. Comes in the Matrix, Corrola, xD & Vibe here in the states......

Yup...that would be a much better way to go most likely than the 1zz.
CrzyCrgThread starterSouth Africa · Jan 15, 2011#6
the time's coming! i will do some research and see if the 2zrfe is available in sa! thanks guys!
CrzyCrgThread starterSouth Africa · Jan 25, 2011#7
Definitely going to go with the 4AGZE engine due to the fact that I'm going to turbo the engine come the end of the year! Thanks guys!
heeroyuy01195Florida · Jan 25, 2011#8
Why not just swap in a 2zz or 1zz? The mounting points are virtually the same as that of a 4ag (Requires a slight elongation of the holes for the motor mount on one of the sides...can't remember which right now). Newer motor that will build way more power than a 4ag ever will.
eTiMaGoBangkok, Thailand · Jan 25, 2011#9
I saw one in a local magazine some time ago.... though they did change for a turbo setup rather than supercharged. No idea of how much fabrication was involved, though.
cali yarisCanoga Park, CA · Jan 25, 2011#10
No one here has done a swap with that engine.
I think turboecho2005 did. He had to do quite a bit of frame modification to make that happen.
severous01SE Texas · Jan 25, 2011#11
if you're goin that far, why not throw in a ls7 or ls9 in there??? tunnel the center for a driveshaft and use the corvett or porsche trans/diff in the rear....with independant suspension. it's feasible.

or, throw in the turbo mr-2 engine in there? or, throw in the b-20 honda engine.
Nexus1155Dorchester · Jan 25, 2011#12
or why not some RX-8 rotary engine I remember being talked about in a previous thread 🙄 😛
turboecho2005Ottawa, Ontario · Jan 26, 2011#13
Frame rail modification is required. I have a thread in the forced induction section. There should be a link to the build photos. Just drop in an ls9 motor and call it a day ;).
YaristeveLos Angeles · Jan 26, 2011#14
Originally Posted by severous01 ↑
if you're goin that far, why not throw in a ls7 or ls9 in there??? tunnel the center for a driveshaft and use the corvett or porsche trans/diff in the rear....with independant suspension. it's feasible.

or, throw in the turbo mr-2 engine in there? or, throw in the b-20 honda engine.
Or, how about what Renault did with their LeCar -> R5 and put the MR2 drivetrain in the back seat area. There was also a short run of "SHOgun" by some company: Yamaha V6 from the Taurus SHO into the back seat area of a Festiva.
thebarberGrand Rapids, MI · Jan 26, 2011#15
2zz and 1zz require frame rails to be cut as the engine/transmission together is wider

would a 4agze still be a 4agze w/o the s/c? lol

a friend of mine has a s/c'd mr2 (subsequently a 4agze is in it). the s/c went kaput, so he turbo'd it. it already has the strong internals meant for boost, so its an ideal candidate to be turbo'd rather than supercharged...
CrzyCrgThread starterSouth Africa · Jan 26, 2011#16
main reason for going with the 4AGZE is the internals... here, it would put another 20 to 30000 onto the modifications... i can pick a 4AGZE up with the supercharger for 7500... i will turbo it later so instead of spending 60000 to turbo, i'm only looking at 25000 to 30000....
CrzyCrgThread starterSouth Africa · Jan 26, 2011#17
Originally Posted by turboecho2005 ↑
Frame rail modification is required. I have a thread in the forced induction section. There should be a link to the build photos. Just drop in an ls9 motor and call it a day ;).
I have a 2006 model Yaris though, so do you have any idea what's gonna happen there?
CrzyCrgThread starterSouth Africa · Jan 26, 2011#18
Originally Posted by thebarber ↑
2zz and 1zz require frame rails to be cut as the engine/transmission together is wider

would a 4agze still be a 4agze w/o the s/c? lol

a friend of mine has a s/c'd mr2 (subsequently a 4agze is in it). the s/c went kaput, so he turbo'd it. it already has the strong internals meant for boost, so its an ideal candidate to be turbo'd rather than supercharged...
That's the plan... looking at the Garret GT3076 turbo... or possibly the equivalent of their GTX3076 which is made by Precision Turbo... I'm lokking at around 200kW on the wheels with this setup, which isn't bad for a car that wiehgs just under a ton...😈
CrzyCrgThread starterSouth Africa · Jan 26, 2011#19
for now i can change the supercharger pulleys and pull about 0.7 bar (10psi) boost of the supercharger which should put me at about 170kW (+- 230 hp)...
CrzyCrgThread starterSouth Africa · Jan 26, 2011#20
so, checked out the ls9 engine... apart from the fact that it probably wouldn't be available in south africa, A 6.2 LITRE SUPERCHARGED V8 IN A YARIS!!!! one can only dream :-p