Yarisworld Archive

GT28 OK for 1.5 Yaris engine?

10 posts · 4,795 views

riverc4cOriginal postHatillo, Puerto Rico · Oct 14, 2010#1
Is this too much turbo for our cars? Stock internals.
http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWAX:IT

Reason I ask is it seems everyone goes with the T25 turbos, but some of the more economical e-bay ones do not have ball bearings. This unit on the other hand looks a little better made. Not sure about the compressor side w/72 trim. Too much?

Replies 9

riverc4cThread starterHatillo, Puerto Rico · Oct 14, 2010#2
Never mind. Found all the info. I wasn't searching with the right keywords.
cali yarisCanoga Park, CA · Oct 15, 2010#3
Too much?
Yes. Glad you found the info, though. Good luck with your project!
riverc4cThread starterHatillo, Puerto Rico · Oct 15, 2010#4
Originally Posted by cali yaris ↑
Yes. Glad you found the info, though. Good luck with your project!
Thanks! I ordered the manifold & sandwich adapter from you. PM me when it ships out.
riverc4cThread starterHatillo, Puerto Rico · Oct 15, 2010#5
Thanks for the input. I decided to go with the GT25. Seems to be the most popular choice for our little engines. Not looking for more than 6 or 7lbs of boost so I can keep the stock internals. Almost done buying the parts.
cali yarisCanoga Park, CA · Oct 15, 2010#6
a GT30 will work too, but that doesn't make it a good choice (well, it would be good for a drag application).

GT25 will be good and nimble for you.
riverc4cThread starterHatillo, Puerto Rico · Oct 15, 2010#7
Very good link. Thanks. It's been a while since I mess with this stuff. Forgot most of it. Last car I worked on was turbocharging a Ford Focus back in 2000(ish).
cali yarisCanoga Park, CA · Oct 15, 2010#8
yes, but within the Garrett GT family of turbos, it IS a valid question. As long as you are comparing apples to apples, it's a fair comparison.

Further I have PERSONALLY used both the GT25 and 28 in my car, and I know the difference. Next is a GT2871, then I'll know the difference with that too.
cali yarisCanoga Park, CA · Oct 16, 2010#9
Sorry Carlos not going to spar with you. There is now enough info on the thread for the OP to understand.
riverc4cThread starterHatillo, Puerto Rico · Oct 20, 2010#10
Guess what came in today...
So I already installed the new plugs, Fuel pump arrives tomorrow and I should have the new injectors by Friday.

1 attachment not included in this copy