Yarisworld Archive

AFE intake issues..

42 posts · 11,417 views

TheDriver916Original postNor Cal · Oct 13, 2010#1
i went to install the AFE intake that arrived today and when i tightened down the mass airflow sensor it wasnt all the way in, it was semi tight but had slight play. i continued to tighten and now the bolts snapped inside the intake, what do i do..... 👎😕

Replies 41

big loLoiza,Puerto Rico · Oct 13, 2010#2
Did you try going to the dealer or a auto part store for a replacement? When you are screwing down the screws don't tighten up to tight or they'll snap again if you feel some play use some silicone like a small gasket good luck buddy
big loLoiza,Puerto Rico · Oct 13, 2010#3
I forgot to mention, add some pics please of the broken sensor might be able to repair it too.
TheDriver916Thread starterNor Cal · Oct 14, 2010#4
the threads that came out of the intake we were able to super glue back in. and then we got shorter screws and it fit like it should have with the parts i was supplied. little patience and innovation and its good as new.
severous01SE Texas · Oct 14, 2010#5
zip ties....solves too many things to be .10 each.
TheDriver916Thread starterNor Cal · Oct 14, 2010#6
this is what it looks like installed and with the minor customization. ending in a great product thanks garm!

2 attachments not included in this copy

toadbowser's castle · Oct 14, 2010#7
looks good! i'm thinking about getting one of these at the end of this year.
SimTronikSts-Anges, Quebec, canada · Oct 14, 2010#8
Make it two :P
big loLoiza,Puerto Rico · Oct 14, 2010#9
Good job!!
mario98cPuerto Rico · Oct 14, 2010#10
The same thing happened to me :/ I use zip ties👍
Picture not included in this copy
cali yarisCanoga Park, CA · Oct 15, 2010#11
I'm going to put in yet another request for shorter screws. hey OP, do you know the length and thread of the replacements you used?

If I have to, I'll provide them myself, this is ridiculous that AFE won't be more responsive.
catliektheifLeesburg, VA · Feb 24, 2012#12
just ordered one from MI a couple days ago! garm, does it come with shorter screws now?

and is this what was causing all of those people to get the cel light?
47_MasoN_47Northwest Alabama · Feb 24, 2012#13
I bought one of these about 2 years ago. Worked fine and never had problems with the mass air sensor thing.
enviriCT · Feb 24, 2012#14
i think the reason is the screws, and the threads that the screws go into is barely attached to the plastic. Either fasten that screw a better way or make that damn pipe metal or something...
1.5Tampa · Feb 25, 2012#15
Had an issue with my maf as well but it wasntt anything that I had to customize.

Enjoy your intake I have this one and really like it.
KSIbuckyFond du Lac, WI · Feb 25, 2012#16
How do you take your battery out with one of these on?
1.5Tampa · Feb 25, 2012#17
Just remove the heat shield.
matthewaiunited states · Feb 25, 2012#18
i also used whatever screws came with it originally no problems no CEL 1 year old i guess maybe its temperamental just one of those weird things
catliektheifLeesburg, VA · Feb 25, 2012#19
cool, cool! i cant wait
dumbo0San Francisco, CA · Mar 29, 2012#20
i wanna know more about this intake, coz the price is really reasonable.. any thoughts? compared to other intakes around here?
1.5Tampa · Mar 31, 2012#21
Its a sri with a heat shield. Sounds great butt dyno says only a couple hp but more fun definitely.
catliektheifLeesburg, VA · Apr 1, 2012#22
Originally Posted by dumbo0 ↑
i wanna know more about this intake, coz the price is really reasonable.. any thoughts? compared to other intakes around here?
Originally Posted by 1.5 ↑
Its a sri with a heat shield. Sounds great butt dyno says only a couple hp but more fun definitely.
yeah short ram intake if you werent sure. i got mine from mi probably a month ago now and i LOVE it! 1.5's right its definitely more fun. it sounds amazing.

the only problem i came across was the common one with the CEL. it came on a week after installing and then it would go on and off. it seems like every time i get to a fourth of a tank of gas it comes on but when i fill back up it goes off again.. hm idk. the price is very reasonable and worth it imo
DJYojimboChicago · Apr 1, 2012#23
Originally Posted by catliektheif ↑
yeah short ram intake if you werent sure. i got mine from mi probably a month ago now and i LOVE it! 1.5's right its definitely more fun. it sounds amazing.

the only problem i came across was the common one with the CEL. it came on a week after installing and then it would go on and off. it seems like every time i get to a fourth of a tank of gas it comes on but when i fill back up it goes off again.. hm idk. the price is very reasonable and worth it imo
Did u use the spacers that came with it?
1.5Tampa · Apr 1, 2012#24
Do not use the spacer/gasket it comes with mount that bitch raw!!!
catliektheifLeesburg, VA · Apr 1, 2012#25
Originally Posted by DJYojimbo ↑
Did u use the spacers that came with it?
yes i did
DJYojimboChicago · Apr 2, 2012#26
Originally Posted by catliektheif ↑
yes i did
What if u removed the spacers, do u think that the cel would not show up anymore because u removed the spacers?
catliektheifLeesburg, VA · Apr 3, 2012#27
im not sure! i tightened the screws today and the CEL came back on.. im boggled
goliath1812Ocala Florida · Apr 3, 2012#28
Originally Posted by 1.5 ↑
Do not use the spacer/gasket it comes with mount that bitch raw!!!
+1
1.5Tampa · Apr 3, 2012#29
Originally Posted by DJYojimbo ↑
What if u removed the spacers, do u think that the cel would not show up anymore because u removed the spacers?
Removing the gasket will fix the CEL
DJYojimboChicago · Dec 1, 2012#30
I know this is an old thread but has anyone zip tied the loose wiring?
1.5Tampa · Dec 1, 2012#31
loose wiring?

The only electrical aspect should be your MAF and it is a loom with a clip
DJYojimboChicago · Dec 1, 2012#32
you can see here in this picture i just have them dangling next to the intake and i'm wondering if i should zip tie them to the intake to make them secure
1.5Tampa · Dec 1, 2012#33
picture?
DJYojimboChicago · Dec 1, 2012#34
Here's the pic of my setup

1 attachment not included in this copy

DJYojimboChicago · Dec 1, 2012#35
I don't know how to fix the pic i just uploaded haha
DJYojimboChicago · Dec 1, 2012#36
my bad 1.5
1.5Tampa · Dec 1, 2012#37
I see the maf but the wire loom coming out of it is behind the intake pipe so I cant see anything loose?
DJYojimboChicago · Dec 1, 2012#38
the wires next to the intake pipe is what i'm worried about. They just dangle there. Should i zip tie them to the intake pipe?
DJYojimboChicago · Dec 1, 2012#39
this is the area i'm talking about. Sorry about the picture i'm assuming it's not gonna show the correct way its suppose to look

1 attachment not included in this copy

DJYojimboChicago · Dec 1, 2012#40
It works fine no cel
1.5Tampa · Dec 1, 2012#41
Yea no issue there, I cant remember if mine clips anywhere or if it just hangs as well but it will be fine.
DJYojimboChicago · Dec 1, 2012#42
thanks 1.5 i guess i'm just being cautious. big road trip to florida next month and i don't want the car to stop or something out of nowhere haha!