Yarisworld Archive

TRD Sport Muffler

35 posts · 11,740 views

.Kevin.Original postPrince George, BC. Canada · Oct 11, 2010#1
My dealer charges 630 dollars for it with installation does it actually sound much different atm all I have is a exhaust tip but was thinkin of buying the TRD Muffler need some input overall please everyone

Replies 34

kimonaHuntington Bch, CA · Oct 11, 2010#2
I'll let someone comment who actually has the TRD... but $630 sure seems like a lot of cash for a muffler!
.Kevin.Thread starterPrince George, BC. Canada · Oct 11, 2010#3
Originally Posted by kimona ↑
I'll let someone comment who actually has the TRD... but $630 sure seems like a lot of cash for a muffler!
Yeah thats with installation price and everything though. Itd prob be the same or more buying it off ebay sadly if someone could point me to some cheap good sounding ones itd be nice aswell
enviriCT · Oct 11, 2010#4
for that money get a zigen or fujitsubo :P
.Kevin.Thread starterPrince George, BC. Canada · Oct 11, 2010#5
Got any links to those lol i dont mind paying for the TRD one but I want a better sound so I was askin so that I dont waste lol
fnkngrvIn The Hotbox · Oct 11, 2010#6
Your biggest issue is the insane install fee. You can pick up any of the mainline mufflers (TRD, Tanabe Medallion, etc) for around 300 US if that is what you are looking for and I would think find a much better install price than the dealer.
.Kevin.Thread starterPrince George, BC. Canada · Oct 11, 2010#7
On ebay atm I got the lowest price found is 450 usd + shipping.

Any cheap mufflers out there that produce better sound o,o
enviriCT · Oct 11, 2010#8
tanabe medallion sounds great, and not loud at all. i hear good things on fujitsubo too..thing is the fujitsubo you have to special order form japan and its around 550 shipped to ya from jp. lol.

you might wanna check that exhaust thread we got
The custom/aftermarket exhaust thread! [Pics + Videos]
auxmikeLI, New Yawk · Oct 11, 2010#9
I have the TRD exhaust.
Paid $305USD and installed it myself in little over 30min.
It's only two spring loaded bolts, no welding.🎉
.Kevin.Thread starterPrince George, BC. Canada · Oct 12, 2010#10
Originally Posted by auxmike ↑
I have the TRD exhaust.
Paid $305USD and installed it myself in little over 30min.
It's only two spring loaded bolts, no welding.🎉
Hows it sound compared to stock and where did ya get it from o,o
auxmikeLI, New Yawk · Oct 12, 2010#11
Got it from Conicelli Toyota of Springfield PA via the net.
You can find it on Ebay too.
I generates a LOT more noise into the pass cabin and can take some time to get used to. I put some FatMat in the trunk well and it's surrounding areas to help quell the sound of it....
It uses a third included muffler mount too.
.Kevin.Thread starterPrince George, BC. Canada · Oct 12, 2010#12
so its worth the price and sounds good o,o
rene0023Coamo, Puerto Rico · Oct 18, 2010#13
man that dealer is too expensive!
QmobileHoytville, ohio · Oct 18, 2010#14
I've got the TRD system....put it on myself in my garage...not hard to install like was mention earlier just couple of bolts, add the provided extra hanger. I personally LOVE it gives the car a real nice growl! the instructions are really good.
TickleTimeTimArkansas · Oct 18, 2010#15
that's odd, no welding? anyone have pictures of this?
SlickHouston, Texas · Oct 18, 2010#16
I cut my muffler off and added a resonating exhaust tip with 2" piping.... it sounds BEAST lol. It has a very low growl to it. It definitely sounds fast, too bad it isn't :(
.Kevin.Thread starterPrince George, BC. Canada · Oct 18, 2010#17
What ya mean cut your muffler slick? And its possibly weight on the vehicle, when my cars full which is rarely it seems I can floor it and shit doesnt move x,x
SlickHouston, Texas · Oct 18, 2010#18
I mean I cut the muffler off about an inch before the pipe went into the muffler. Then I had a shop weld on a two inch wide, about 2 feet long pipe, and then had them weld on a resonating exhaust tip.

And yes and no, its weight and its that the car is naturally slow
.Kevin.Thread starterPrince George, BC. Canada · Oct 18, 2010#19
What ya mean cut your muffler slick? And its possibly weight on the vehicle, when my cars full which is rarely it seems I can floor it and shit doesnt move x,x
SlickHouston, Texas · Oct 18, 2010#20
Do you really want me to re-post what I just posted lol
.Kevin.Thread starterPrince George, BC. Canada · Oct 18, 2010#21
Originally Posted by Slick ↑
I mean I cut the muffler off about an inch before the pipe went into the muffler. Then I had a shop weld on a two inch wide, about 2 feet long pipe, and then had them weld on a resonating exhaust tip.

And yes and no, its weight and its that the car is naturally slow
Nice how much did that come out to?

And I guess, I weigh like 120 pounds so I kind of fly in city traffic, no drags for me etc lol

EDIT:

? haha
SlickHouston, Texas · Oct 18, 2010#22
I think I paid like 30 bucks or something to get the welding done, and then another 15 for them to custom fit the bolt on tip. They had to cut the bolt on part off etc.

It doesnt matter how much weight is in the car, its a Yaris econovehicle... not a bugatti lol
.Kevin.Thread starterPrince George, BC. Canada · Oct 18, 2010#23
Originally Posted by Slick ↑
I think I paid like 30 bucks or something to get the welding done, and then another 15 for them to custom fit the bolt on tip. They had to cut the bolt on part off etc.

It doesnt matter how much weight is in the car, its a Yaris econovehicle... not a bugatti lol
Cool, I had a friend who apparently cut his muffler on a firefly thing was loud as shit.


And I guess, I look at it as if your car isnt anything special like corvette, ferrari, lamborghini, bugatti, ashton martin, etc it isn't anything special.
SlickHouston, Texas · Oct 18, 2010#24
Yeah, the car gets loud, but not raspy like a rice can. The resonating tip really rolls the tone into a nice deep sound.


And were not discussing cosmetics or how we think our cars look. Were discussing the fact that its a car with a tiny engine that is naturally slow. No matter how much weight or road conditions etc. Granted, it can be made quick. In rare cases it can be made fast, ex. Garm. But the standard Yaris is slow, which is why it gets a bagillion miles to the gallon and the reason why I love it so :)
.Kevin.Thread starterPrince George, BC. Canada · Oct 18, 2010#25
Originally Posted by Slick ↑
Yeah, the car gets loud, but not raspy like a rice can. The resonating tip really rolls the tone into a nice deep sound.


And were not discussing cosmetics or how we think our cars look. Were discussing the fact that its a car with a tiny engine that is naturally slow. No matter how much weight or road conditions etc. Granted, it can be made quick. In rare cases it can be made fast, ex. Garm. But the standard Yaris is slow, which is why it gets a bagillion miles to the gallon and the reason why I love it so :)
Damn I have to check that out sounds cheaper than getting a new exhaust lol.

And I guess, I have a first gen Mustang Fastback v8 aswell I never notice but prob because I never go over 80 mph.
SlickHouston, Texas · Oct 18, 2010#26
Yes, IMO, removing the muffler is by far the cheapest route. However, and I stress this, HOWEVER, there are some draw backs and things that need to be considered. Like, because of my resonating exhaust tip I dont have a raspy/rattling can noise. I'm sure if I didnt have the tip it would be slightly "raspier" (not a word) sounding. There is a possible legal issue by not having a muffler. Texas requires a visible muffler to pass inspection. However, some inspectors will count our mid-pipe as a muffler and pass us, some will not. These are just a few things to consider. Its definitely the cheap way out, but it has is advantages and disadvantages. Me personally, I have 0 regrets and I would do it again if given the opportunity. :)
.Kevin.Thread starterPrince George, BC. Canada · Oct 18, 2010#27
Originally Posted by Slick ↑
Yes, IMO, removing the muffler is by far the cheapest route. However, and I stress this, HOWEVER, there are some draw backs and things that need to be considered. Like, because of my resonating exhaust tip I dont have a raspy/rattling can noise. I'm sure if I didnt have the tip it would be slightly "raspier" (not a word) sounding. There is a possible legal issue by not having a muffler. Texas requires a visible muffler to pass inspection. However, some inspectors will count our mid-pipe as a muffler and pass us, some will not. These are just a few things to consider. Its definitely the cheap way out, but it has is advantages and disadvantages. Me personally, I have 0 regrets and I would do it again if given the opportunity. :)
I live in a small town so we dont even get what we call "Air care" here in Canada.

(Making sure the car is fine and doesnt over pollute) shouldn't be an issue, I got a tip on my car atm.

So all I would need is an extra piec of metal with a tip and have it all welded together to get the better sound? I don't know if its just me but my tip has an enclosed thing inside so it slightly sounds different because the air comes out being compressed kinda. Gotta go real fast to hear it or hear it barely on idle.

Thanks for the tips man.
SlickHouston, Texas · Oct 19, 2010#28
No problem. Since you were fixing to drop 600 bucks on an exhaust kit, doing this mod will be a breeze. For a little extra, an exhaust shop should be able to make u a custom axle-back system. Where instead of cutting off the muffler like I did, they just un-bolt the muffler assembly at the flange point and then make a piece that bolts back up and consists of just a two inch pipe with your tip. Doing it this way lets you put back your stock exhaust if you dont like the way it sounds, without having to spend more money.
kimonaHuntington Bch, CA · Oct 19, 2010#29
Can't comment on how the Yaris would sound/perform with a resonated tip replacing the muffler... but I remember doing this with my Datsun 240Z way back when. I had a header and an Ansa exhaust system with a midpipe resonator. I eventually removed the rear Ansa muffler and simply replaced it with an Ansa dual-resonated tip. The car was quite loud but sounded great!

BTW, the Ansa dual-resonated tip looked very similar to this one by Monza:

1 attachment not included in this copy

.Kevin.Thread starterPrince George, BC. Canada · Oct 19, 2010#30
Originally Posted by kimona ↑
Can't comment on how the Yaris would sound/perform with a resonated tip replacing the muffler... but I remember doing this with my Datsun 240Z way back when. I had a header and an Ansa exhaust system with a midpipe resonator. I eventually removed the rear Ansa muffler and simply replaced it with an Ansa dual-resonated tip. The car was quite loud but sounded great!

BTW, the Ansa dual-resonated tip looked very similar to this one by Monza:
CRAZY how the hell do you get that and hows it work?

Welded on like 200 dollars I am guessing?
SlickHouston, Texas · Oct 19, 2010#31
200 bucks is pretty steep. I think I paid in total like $50 for the shop to cut a pipe, make some bends and a few welds. Even that was a bit much because the welds were kind of ugly. A muffler shop could probably make u that complete replacement pipe bit for around 100. Maybe a little more. Shop around, but $200 for what your wanting to do is too much IMO.
.Kevin.Thread starterPrince George, BC. Canada · Oct 19, 2010#32
Hmm I will have to search my small town has like one Auto Shop but ive never gone to it I think they do everything there.

I used to work at my dads friends auto shop doing welding problem is I dont have my own gear or I'd do it myself lol
kimonaHuntington Bch, CA · Oct 19, 2010#33
Resonated Monza tips are available from many vendors for about $50-75.

Remove the muffler and fab a pipe with the tip should cost about $100 total.

Here are some resonated Monza tips: http://www.pacesetterexhaust.com/tips.htm
.Kevin.Thread starterPrince George, BC. Canada · Oct 19, 2010#34
Originally Posted by kimona ↑
Resonated Monza tips are available from many vendors for about $50-75.

Remove the muffler and fab a pipe with the tip should cost about $100 total.

Here are some resonated Monza tips: http://www.pacesetterexhaust.com/tips.htm
Reccommendd size? 2 inches? The dual tubes nice any idea if youtube has vids on these things sound?
kimonaHuntington Bch, CA · Oct 19, 2010#35
I'd go with the dual 3" outlets... in which case you'll have to get the 2 1/4" inlet. Nevertheless, simply fab a 2" exhaust pipe to fit the inlet.

While you may find a youtube for the Monza tips, the sound won't duplicate this custom set-up.