33OHOriginal postDover, Ohio · Sep 30, 2010#1Wondering how a 15x7 +0 offset will fit. I know it's aggressive but is anyone running this size/offset?
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 52
YAR1SRaleigh, NC · Sep 30, 2010#2you actually commented on my car a while back.
16x8 Rims w 205/45/16 those are what +0 look like on a yaris, haha major poke.
marlondogLost Angeles · Sep 30, 2010#3Keep the Kosei's! They are by far the best wheels you've had on your car. Getting rid of them just to get these wheels is not a good idea. Your just gonna get rid of them like the other wheels. Keep the Kosei's!
WeeYariGeorgetown, Ontario, Canada · Sep 30, 2010#4Here's a local guy who just posted his disappointing 15x7.5 +0 offset. You can be the judge.
kimonaHuntington Bch, CA · Sep 30, 2010#533OHThread starterDover, Ohio · Sep 30, 2010#6 Originally Posted by
YAR1S ↑ you actually commented on my car a while back.
16x8 Rims w 205/45/16 those are what +0 look like on a yaris, haha major poke.
These are 1" wider.
Originally Posted by
WeeYari ↑ Here's a local guy who just posted his disappointing 15x7.5 +0 offset. You can be the judge.
These are 1/2" wider.
Originally Posted by
kimona ↑
Those are 1/2" wider as well.
I went ahead and bought them. Only $50 for all 4, still in original boxes. We'll see. 🤘
blacksandiegovitzJust chillin' out brah ! · Sep 30, 2010#7 Originally Posted by kustom play ↑
its going to look ridiculous if its like that green set
^^ Like he saids the green set is about an inch wider also that car is like at mad monster truck ride height , totally wrong tire size , and has no negitive camber. Now i'd say like a 185/45 tire , slammed on coilovers and about -2.5front and -3 + degrees out back and you'd be stylin' with those rims 👍
yarisugiハワイ · Sep 30, 2010#8Don't know if there is a 185/45 but there are 175/50 and 195/45.
33OH - you always find some crazy prices on rims, just like your Koseis!
33OHThread starterDover, Ohio · Oct 1, 2010#9Here's a few pics I've found of 15x7 0 offset on a Yaris. Definitely looks do-able. I'm thinking a 195/50 may work well, I have a few laying around and will try them first.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
33OHThread starterDover, Ohio · Oct 1, 2010#10 Originally Posted by
yarisugi ↑ Don't know if there is a 185/45 but there are 175/50 and 195/45.
33OH - you always find some crazy prices on rims, just like your Koseis!
Thanks for the suggestions yarisugi - I know you know your stuff. 👍
And yes - my very crazy habit of driving hundreds and hundreds of miles for deals (these were 400 miles away) has a tendency to land me some pretty nice stuff. 😉
yarisugiハワイ · Oct 1, 2010#11Not the same size, but very close if calculated - 15x7.5 +13mm. equivalent to 15x7 +0mm. You can see the slight poke.
2 attachments not included in this copy
33OHThread starterDover, Ohio · Oct 2, 2010#12Any camber there at all?
yarisugiハワイ · Oct 2, 2010#13no camber. Lookin' at your rims, it looks really deep - almost negative offset...?
33OHThread starterDover, Ohio · Oct 2, 2010#14Not sure. Let me actually say they may not even be 0 offset. It isn't stamped on the rim and the boxes don't have it listed. Trying to read online how to calculate offsets.
The only thing that is a little comforting about them is they were on a Ford Escort before this. 😳
33OHThread starterDover, Ohio · Oct 2, 2010#15Not sure if it's right but I followed the instructions online and it's coming up as a -44.5 offset, lol.
33OHThread starterDover, Ohio · Oct 2, 2010#16Yep, it's right. 15x7 -44.5, hah.
TamagoOff Grid · Oct 2, 2010#17 Originally Posted by
33OH ↑ Yep, it's right. 15x7 -44.5, hah.
to get offset you need to measure backspacing and forward spacing. subtract the forward spacing from the backspacing to determine how far off "center" the hub is. then convert that into MM.
remember, a 7" wheel is closer to 8" wide.
marlondogLost Angeles · Oct 2, 2010#18Have you even put them on your car yet? That should give you an idea on how they will look. After looking at the back spacing, I think these wheels will be in the for sale section really soon. It's just too bad you drove 400
(One way or round trip?) miles and paid $50 for wheels that may not fit. Good Luck!
33OHThread starterDover, Ohio · Oct 2, 2010#19 Originally Posted by
Tamago ↑ to get offset you need to measure backspacing and forward spacing. subtract the forward spacing from the backspacing to determine how far off "center" the hub is. then convert that into MM.
remember, a 7" wheel is closer to 8" wide.
Backspacing - 2"
Forward spacing - 5 1/4"
Subtracted: -3.25"
Converted: -82.55mm?
And yes - it is exactly 8" wide.
kimonaHuntington Bch, CA · Oct 2, 2010#20A 7" wheel with a 2" backspace has ET-48mm. I see craigslist in your future.
33OHThread starterDover, Ohio · Oct 2, 2010#21Yep, already on there. Still a nice money-making buy, not too concerned. Think I'll be able to get more than $50 bucks out of them. :)
TamagoOff Grid · Oct 3, 2010#22 Originally Posted by
33OH ↑ Backspacing - 2"
Forward spacing - 5 1/4"
Subtracted: -3.25"
Converted: -82.55mm?
And yes - it is exactly 8" wide.
if the wheel is 8" wide, how are you not getting a back and forward spacing total of 8" ?
recheck your maths sir
also, are you SURE they're 4X100 and not 4X108?
33OHThread starterDover, Ohio · Oct 3, 2010#23They're 4x100, I put them on my car. And the hub mounting surface is 3/4" wide, which is why my math comes up a little short.
yarisugiハワイ · Oct 4, 2010#24step 1: measure the full width of the rim in millimeters, end to end.
step 2: divide that by 2, that will give you the +0 (ex: width of rim 204mm. 1/2 = 102mm)
step 3: measure back side of rim from mounting point of rim to edge of rim.
step 4: subtract step 3 from step 2. That will be your offset - in your case it will be negative most likely.
33OHThread starterDover, Ohio · Oct 4, 2010#25- 203mm
- / 2 = 101.5mm
- 50.8mm
-50.7mm yarisugiハワイ · Oct 4, 2010#2650.7 is your +0 offset. That's if the mounting face was exactly dead-center of the rim. But I think on your wheel the mounting face is set back a bit from center right? -Like the pic on the right.
Picture not included in this copy
33OHThread starterDover, Ohio · Oct 4, 2010#27Yep, it's 2" away from the rear of the rim. Way set back.
yarisugiハワイ · Oct 5, 2010#282 inches away huh? That equals to about 50mm. 50-50= 0. I guess you were right in the first place, +0 offset it is!
edit: should be 101.5-50.8. I need to go back to school.
TamagoOff Grid · Oct 5, 2010#29 Originally Posted by
yarisugi ↑ 2 inches away huh? That equals to about 50mm. 50-50= 0. I guess you were right in the first place, +0 offset it is!
uhh
no
33OHThread starterDover, Ohio · Oct 5, 2010#30Lol, it's definitely negative. I stuck one on my car and it stuck out about 5" or so. :)
WeeYariGeorgetown, Ontario, Canada · Oct 5, 2010#31^ Did you take a pic of that? Would be hilarious to see!
yarisugiハワイ · Oct 5, 2010#32oops, my bad. Thanks Tamago. If it's 2" away, then -50 mm offset. Wow, that's crazy.
I'm with WeeYari - pics!
33OHThread starterDover, Ohio · Oct 5, 2010#33Here ya go.
1 attachment not included in this copy
WeeYariGeorgetown, Ontario, Canada · Oct 5, 2010#34🤣 🤣 🤣
33OHThread starterDover, Ohio · Oct 5, 2010#35I could put 15 degrees of camber on and roll on them, just saying. :P
WeeYariGeorgetown, Ontario, Canada · Oct 5, 2010#36Too bad there wasn't any rubber on those. You'd be crowned Craziest Poke Yet.
Those the ones you say were previously on an Escort? That car either looked ridiculous, had a wide body kit, or an Escort has some seriously tucked hubs.
33OHThread starterDover, Ohio · Oct 5, 2010#37I think this would be a pretty accurate Photoshop, lol.
1 attachment not included in this copy
33OHThread starterDover, Ohio · Oct 5, 2010#38Yes, on an Escort. It must have had some crazy poke and looked ridiculous.
Kaotic LazagnaCentral Valley, CA · Oct 5, 2010#39hahahaha, that's worse than this:
Picture not included in this copy
Picture not included in this copy
KCALB SIRAYVirginia · Oct 5, 2010#40^ that's hot, I don't care what you say, you should have done that =)
33OHThread starterDover, Ohio · Oct 5, 2010#41Yeah really, what's wrong with that? That's perfect KL.
33OHThread starterDover, Ohio · Oct 5, 2010#42Picture not included in this copy
kimonaHuntington Bch, CA · Oct 5, 2010#43I cringe just looking at those fitments. Yikes!
marlondogLost Angeles · Oct 5, 2010#44Damn Ryan! You seriously were thinking about trading your Kosei's for those?😲 Just stay off craigslist...you won't be broke and you won't be making "wild goose-chases" for some silly car parts you don't need.👍
TamagoOff Grid · Oct 5, 2010#45 Originally Posted by
33OH ↑ Here ya go.
that reminds me of this:
Picture not included in this copy yarisugiハワイ · Oct 5, 2010#46damn! like tumors coming outta the wheel wells.
TamagoOff Grid · Oct 5, 2010#47 Originally Posted by
yarisugi ↑ damn! like tumors coming outta the wheel wells.
hot, sticky tumors!
Picture not included in this copy 33OHThread starterDover, Ohio · Oct 5, 2010#48 Originally Posted by
marlondog ↑ Damn Ryan! You seriously were thinking about trading your Kosei's for those?😲 Just stay off craigslist...you won't be broke and you won't be making "wild goose-chases" for some silly car parts you don't need.👍
Nah, not trading. I bought these for $50 for all 4.
33OHThread starterDover, Ohio · Oct 5, 2010#49 Originally Posted by
Tamago ↑ that reminds me of this:
Picture not included in this copy
At least yours serve a purpose lol 😳
Kaotic LazagnaCentral Valley, CA · Oct 5, 2010#50 Originally Posted by
KCALB SIRAY ↑ ^ that's hot, I don't care what you say, you should have done that =)
Originally Posted by
33OH ↑ Yeah really, what's wrong with that? That's perfect KL.
lol, nothing wrong with it (when I said worse, I was just referring to Ryan's poking more). hahaha
I would have gotten those Sportmax's, but I would have needed MAJOR fender pulling, and I didn't want to fcuk up my fenders. hahahaha. Plus, 18's look too big for some reason. Now, those in 17x8 or 9 (what ever is offered in 4 lug) with some 195 conti's or 205 Falkens, mmmmmm, mmmmm, good!