Yarisworld Archive

GT2554R

28 posts · 5,261 views

sleey0Original postPA · Sep 28, 2010#1
What is the compressor outlet flange for (triangle with 3 bolts) IC piping? Downpipe? Doesn't the dowpipe go on the 5 bolt turbine outlet?

I get the T25 standard square/rectangle 4 bolt to manifold, but what goes to the compressor oulet and turbin oulet? I thought it was just IC piping.

1 attachment not included in this copy

Replies 27

sleey0Thread starterPA · Sep 28, 2010#2
In focus_Shifts pic I am right about that turbine outlet mating with the downpipe.

Still curious as to the triangular compressor outlet on the garrett. lol

1 attachment not included in this copy

sleey0Thread starterPA · Sep 28, 2010#3
Another good pic of the triangle flange.

1 attachment not included in this copy

sleey0Thread starterPA · Sep 28, 2010#4
Just want to know what that triangle flange goes to.
sleey0Thread starterPA · Sep 28, 2010#5
So the triangle shaped flange would connect IC piping? how? A bracket with coupler?

And THANKS Carlos!!!
pimp my yarischicago · Sep 28, 2010#6
This is your compressed air output to intercooler and then to throttle body. Turbine side is called hot side or exhaust side. Compressor side is intake side or cold side. And the hole thing can be called several different names. Some of my favorites are Disco potato and hairdryer.
yarisugiハワイ · Sep 28, 2010#7
interesting. first time I've seen a flanged compressor outlet.
Looks like you'll have to fabricate a mating flange unless it comes with a flange piece.
sleey0Thread starterPA · Sep 28, 2010#8
Ok. looking at the zage turbo pic above, where does the air filter mount to?
pimp my yarischicago · Sep 28, 2010#9
Go to Ebay and type [GT25 flange] and U will find it
sleey0Thread starterPA · Sep 28, 2010#10
Originally Posted by yarisugi ↑
interesting. first time I've seen a flanged compressor outlet.
Exactly.

So how are we supposed to get the IC piping on there?
sleey0Thread starterPA · Sep 28, 2010#11
Originally Posted by pimp my yaris ↑
Go to Ebay and type GT25 flange and U will find it
Isn't that just the flange to mount to manifold?

Doesn't look triangular to me🤷
pimp my yarischicago · Sep 28, 2010#12
There is also compressor flanges
sleey0Thread starterPA · Sep 28, 2010#13
🤷

1 attachment not included in this copy

sleey0Thread starterPA · Sep 28, 2010#15
This

1 attachment not included in this copy

sleey0Thread starterPA · Sep 28, 2010#16
And thanks for helpinig this n00b.

Actually, this seems like a better was of doing it. More secure and maybe less leakage?
pimp my yarischicago · Sep 28, 2010#17
The one your looking at has ball bearings and is of better quality, but much more $
Focus_Sh1ftNew Jersey · Sep 28, 2010#18
Yeah, I don't understand the purpose of that either...
sleey0Thread starterPA · Sep 28, 2010#19
Originally Posted by pimp my yaris ↑
http://cgi.ebay.com/ebaymotors/GODSP...Q5fAccessories

This is my turbo. Super fast spooling and no extra flanges to buy
Thanks, but I am saving for the gold-standard Garrett.

I am doing this once and once only.

So I will save extra for the garrett.

Now read your pm plz! lol
sleey0Thread starterPA · Sep 28, 2010#20
Originally Posted by Focus_Sh1ft ↑
Yeah, I don't understand the purpose of that either...
Purpose of what? Me wanting the best possible piece of the heart of your system?

Or the crazy triangle flange?
jonismynameadirondacks, ny · Sep 28, 2010#21
nvm. someone got it.
sleey0Thread starterPA · Sep 28, 2010#22
Originally Posted by jonismyname ↑
nvm. someone got it.
Go ahead. The more the better!🤘
jonismynameadirondacks, ny · Sep 28, 2010#23
blank flange on ebay

don't know for a fact why they use a flange, but it may allow folks to weld a blank flange onto the intercooler piping and still remove it from the turbo. gotta be more secure and not have to worry about boots and clamps back there. i'm speculating with no research or past knowledge though. just looking.
sleey0Thread starterPA · Sep 28, 2010#24
^^ Thanks for that! I might get one now.

NM. didn't read ur post first. lol
jonismynameadirondacks, ny · Sep 28, 2010#25
Originally Posted by sleey0 ↑
^^ Thanks for that! I might get one now.

But I still don't uderstand how the IC piping, which is round, will fit.

Does it go thru the flange and somehow bolt down?

Whaddya think?
piping is welded to flat plate, that is bolted to turbo with gasket. no boots or clamps, and removable
sleey0Thread starterPA · Sep 28, 2010#26
Sounds like a PITA.

How are regular turbos IC piping connected? Couplers?

It's funny garm hasn't chimed in cuz he was running this turbo.

Carlos - can you make this turbo work with your setup with the wierd outlet flange?
jonismynameadirondacks, ny · Sep 28, 2010#27
Picture not included in this copy
sleey0Thread starterPA · Sep 28, 2010#28
^^ Thanks for that bro!