Can anyone list the sizes, or just list the biggest size of a turbo that will fit with clearance in regards to thefirewall and ac lines?
Turbo clearance
28 posts · 5,641 views
Replies 27
^ Can't answer the question that way. Depends on how it's clocked and the angle and depth of the manifold.
Ok lets say on the mani.u sell.
And can u explain clock a.little bit?
And can u explain clock a.little bit?
^ clocking is by rotating the compressor housing in relation to the turbine housing.
You need to do a little bit of research on your own. Look up a book called Maximum Boost by Corky Bell. Its a bit old but lots of useful information in it.Originally Posted by sleey0 ↑Ok lets say on the mani.u sell.
And can u explain clock a.little bit?
Thanls guys.
I know enough about turbos to get a good idea. Just had a couple of?
I have enough books to.read as i am almost donw with my bachelors in IT. Then comes master..school. yuck
I know enough about turbos to get a good idea. Just had a couple of?
I have enough books to.read as i am almost donw with my bachelors in IT. Then comes master..school. yuck
Sounds like fun i enter grad school next year.Enjoying the time off for now....
with the mani I sell and use, I *think we can fit a GT30. The GT28 I have now fits fine.
If you're not going big boost, (200+), no reason to get anything bigger than a GT25. I miss that thing, it was so nimble.
If you're not going big boost, (200+), no reason to get anything bigger than a GT25. I miss that thing, it was so nimble.
as always,garm dropping mad knowledge!
yhanks, bro and i cant wait for that ssk!!!!!!!!!!!!!!!!
yhanks, bro and i cant wait for that ssk!!!!!!!!!!!!!!!!
IT ALL MAKES SENSE NOW!!!Originally Posted by Yoda ↑Sounds like fun i enter grad school next year.Enjoying the time off for now....
You are a stinkin' GATOR👎👎👎
GO NOLES!!!!!!
<<<starts singing seminole chant w/arm chop>>>>
hahaha
j/k bro!
LMAO lol
^ finally a subject I know ZERO about -- SPORTS. 😆
This goes WAY beyond sports, garm.
The hatred is genetic and id IN ThE BLOOD!!!!
The hatred is genetic and id IN ThE BLOOD!!!!
Noel, isn't that something that goes in my front yard as a good fortune piece?
Hook'em horns!!!!!!!!!!!!!!!!!
Hook'em horns!!!!!!!!!!!!!!!!!
🤷
But yeah I don't see why anything other than a GT25 is needed, unless you like turbo lag.
But yeah I don't see why anything other than a GT25 is needed, unless you like turbo lag.
No, just curious is all.
Is the T28 great for quick spooling?
Is the T28 great for quick spooling?
^ no. smaller is better.
That's NOT what she said.Originally Posted by cali yaris ↑^ no. smaller is better.
What about the 14g Greddy turbo.
Quick spooler? It seems pretty tin .lol
Quick spooler? It seems pretty tin .lol
It' spooled super fast when I had it on my car.
What car did you install it on?
The 05 RS?
The 05 RS?
Yeah, I had a thread on it and everything titled "Greddy Turbo Installed."Originally Posted by sleey0 ↑What car did you install it on?
The 05 RS?
Oh, I just read it.
From your observations, how much work would it require to fit the greddy kit into an 08 hatch?
Have you looked at the 2007-2009 Yaris engine bay?
I looked at the pics and it seems somewhat do-able.
Any feedback would be great!
From your observations, how much work would it require to fit the greddy kit into an 08 hatch?
Have you looked at the 2007-2009 Yaris engine bay?
I looked at the pics and it seems somewhat do-able.
Any feedback would be great!
^ O ya, Gotta love raw doggin some random's
I don't know guys....i have the new GTX 28RS from Tial and it's designed to spool-up in a heart beat.
It uses the new redesigned billet compressor wheel and also has the tial stainless steel polished housing; which is half the weight and size of the normal GT28.
just because you get alittle bigger dosen't mean you cant get it to spool fast. there have been great advances in turbo design. I have the latest and greatest GTX28RS from Tial. Jake at Tial has this thing designed to make up to 500hp on a 1.5L motor gentleman.
It's all about designe.
XBG
It uses the new redesigned billet compressor wheel and also has the tial stainless steel polished housing; which is half the weight and size of the normal GT28.
just because you get alittle bigger dosen't mean you cant get it to spool fast. there have been great advances in turbo design. I have the latest and greatest GTX28RS from Tial. Jake at Tial has this thing designed to make up to 500hp on a 1.5L motor gentleman.
It's all about designe.
XBG
For those of you with space issues and thats pretty much all of you. After seeing the inside of your engine bays "not to mention that A/C line location" right in the way of everthing.
I'm working on or should I say in the process of helping someone with using a stainless flexable industrial line and fitting kit to move those pesky A/C lines out of the way but still utilize your factory mounting location. Basicly push your hard lines over by your ecu and run a industrial Stainless braided line with compression fittings to your stock mounting point. Then you have alot more room to play.
Here are a couple of pics that might interest you. first is the GT28R ss from Tial It's the same one I'm using but I have the GTX version which is just a redesigned billet compressor wheel. But for picture purposes it's the same. You can see that the stainless housing is small and compact and can fit in tight places. Also here is the new Tial BOV QR
QR is the more compact recirculating BOV. Optional 1.0" or 1.34" reciruclation port, uses the standard TiAL V-band flange and can be converted into a standard Q BOV by swapping the bottom piece.
Food for thought gentlemen.
XBG
I'm working on or should I say in the process of helping someone with using a stainless flexable industrial line and fitting kit to move those pesky A/C lines out of the way but still utilize your factory mounting location. Basicly push your hard lines over by your ecu and run a industrial Stainless braided line with compression fittings to your stock mounting point. Then you have alot more room to play.
Here are a couple of pics that might interest you. first is the GT28R ss from Tial It's the same one I'm using but I have the GTX version which is just a redesigned billet compressor wheel. But for picture purposes it's the same. You can see that the stainless housing is small and compact and can fit in tight places. Also here is the new Tial BOV QR
QR is the more compact recirculating BOV. Optional 1.0" or 1.34" reciruclation port, uses the standard TiAL V-band flange and can be converted into a standard Q BOV by swapping the bottom piece.
Food for thought gentlemen.
XBG
2 attachments not included in this copy
Xbgod droppin mad knowledge:)
Thanks, bdother.
Oh.and id bet u couls sell.quite a few of thos ac line relocation kits. Lol
Especially around hhere!
Thanks, bdother.
Oh.and id bet u couls sell.quite a few of thos ac line relocation kits. Lol
Especially around hhere!
There will always be things to concider when choosing your A/R size but what you fail to remember is it's not just the A/R size that makes it spool quicker it's also the fin angle in which the compressor wheel is machined at. Like the new Billet GTX compressor wheel. Fin angle changes everything. It's no different when I have guys from General Dynamics come in and need a self-propelled rocket to travel at a certian distance with the same load. fin pitch and redesigned angles are what produce distance and displacement. Which is why the new Billet Tial / Garrett GTX turbo spools up 10% faster than previous models. and yes the Tial GT28 ss housing is physically smaller and lighter than its predocessor.
XBG
XBG