.Kevin.Original postPrince George, BC. Canada · Sep 13, 2010#1Hi, everyone. I'm interested in painting my hubcaps all black except the toyota emblem I like it silver, how would I go abouts doing this.
Reccommended paints? Is there simple ones I can get at Walmart or Canadian tire that won't look like shit, yet work.
ex; aslong as it's black glossy water resistant and dirt it should be fine?
Looked for some guides didn't find anything along these lines links would be cool.
Thanks again guys.
Replies 10
BrianRiverside, CA · Sep 13, 2010#2Scuff sand, adhesion promoter, primer, base coat clear coat, wet sand if required. I usually use SEM paint.
FreedanSan Diego, CA · Sep 13, 2010#3Kevin, have you heard/seen those "Beautification Trims"? I think that's what they are called. Basicly, they are trim for your Steelies. Looks pretty good and are about $40ish for a set of 4.
Here is a link to the thread that has pics of the "beautification trims".
Steelies or Hubcaps or ??? All I can say is that they do look pretty good, especially if you clean and wax your steelies.
padre1964atlanta ga · Sep 13, 2010#4.Kevin.Thread starterPrince George, BC. Canada · Sep 13, 2010#5Where do you exactly get beauty rings? And how do you put them on, those look badass.
They would prob look nice with some bullet caps too.
Thanks for the info so far guys, btw I tried to take off my hub caps but it felt like they were gonna snap. Went to my spare wheel and the only tools I found were for the steelies.
padre1964atlanta ga · Sep 13, 2010#6these are the rings i bought off ebay.
http://cgi.ebay.com/ebaymotors/15-St...item518bcac617 he has several more sets, ships fast and i am happy with how they look. they just snap right on. as for the standard hub caps, just give them a good tug and they will pop off.
.Kevin.Thread starterPrince George, BC. Canada · Sep 13, 2010#7Damn, nice rings. You're sure those will fit on my stock 2010 sedan? If so thanks for the find I'll buy some of those with my next pay cheque I think it comes with 4.
TamagoOff Grid · Sep 13, 2010#8if you do spray, heat the can in a pot of boiling water, it makes the paint go on super thick, without running
.Kevin.Thread starterPrince George, BC. Canada · Sep 14, 2010#9Wouldn't that explode a can of paint?
.Kevin.Thread starterPrince George, BC. Canada · Sep 14, 2010#10Sorry for the double post, I also wanted to add if there were any ebay links for some centre caps to go with the stainless steel rings
padre1964atlanta ga · Sep 14, 2010#11http://www.harborfreight.com/replace...cap-93833.html they are a bit too small and require being bonded on to the rim. also had to trim off half the bottom to fit flush. sand blasted and clear coated prior to installing. should be easy enough to knock them off if i ever have a reason to.