Yarisworld Archive

Steelies or Hubcaps or ???

51 posts · 31,041 views · page 1 of 2

CtrlAltDefeatOriginal postIndianapolis IN · Feb 15, 2009#1
I just installed my new springs and was looking at my LB without the hubcaps and thought it looked kinda cool without them... I like black wheels and am unlikely to be able to afford new wheels any time soon, so I am considering running without the hubcaps... My wife, however hates the steelies look and wants me to use the hubcaps which I feel make it look like every other Yari out there... I feel there might also be middle ground where I paint the steelies and/or the hubcaps. I just spent a lot of money on the car and cannot afford to do any thing expensive but if I could find color matched spray paint I think the hubcaps would look good painted black sand pearl to match the car and the Toyota symbol in the center flat black to match my soon to be painted flat black front and rear symbols... what ever the case may be, I'd like to know everyone's opinion and see some pics of cheap/free steelie/hubcap mods if you've done something to your stock wheels...

Picture not included in this copy
Picture not included in this copy

Replies 50

33OHDover, Ohio · Feb 15, 2009#2
I like your idea of painting them if you're not getting rims. I think bronze would look awesome too.

Also, try "black chrome" for your emblems, will make it look 10x better than flat black in my opinion. 👍
CtrlAltDefeatThread starterIndianapolis IN · Feb 15, 2009#3
Originally Posted by ryank ↑
I like your idea of painting them if you're not getting rims. I think bronze would look awesome too.

Also, try "black chrome" for your emblems, will make it look 10x better than flat black in my opinion. 👍
hmmm bronze steelies...interesting... hey don't forget to vote😁
33OHDover, Ohio · Feb 15, 2009#4
Or bronze hubcaps. =)
Klink10910 · Feb 15, 2009#5
I was like you in that until I got my wheels I ran the steelies. You can with a little effort wax those flat black wheels producing a decent look to them. It would hold your grief until funds become available. I did just that along with the stock caps and was not displeased.
CtrlAltDefeatThread starterIndianapolis IN · Feb 15, 2009#6
Originally Posted by ryank ↑
Or bronze hubcaps. =)
also interesting, but it's so hard to know what that would look like until actually on the car... I'm not sure bronze would look right on the black... also, it sems like most metal spray paints look cheap and fake (they will never look like the actual metal, just a fake matte version of it)
CtrlAltDefeatThread starterIndianapolis IN · Feb 15, 2009#7
Originally Posted by Klink10 ↑
I was like you in that until I got my wheels I ran the steelies. You can with a little effort wax those flat black wheels producing a decent look to them. It would hold your grief until funds become available. I did just that along with the stock caps and was not displeased.
hmmm so shine up the steel and use the hubcaps?
33OHDover, Ohio · Feb 15, 2009#8
SIPNGAS(Lisa's) with flat black painted hubcaps.

Picture not included in this copy
Klink10910 · Feb 15, 2009#9
I don't see why not....cheap and I think you would be surprised. I still have mine and would not hesitate to put them back on if needed. I also think that if you did it you would rule out repainting them at least in black. Once done add some chrome lug nuts (Honda type comes to mind) and take a look.
id3379Feb 15, 2009#10
i think steelies rock for a temp look until you get rims ! look ok to me on mine atleast..

IMO the yaris looks very different with the noob-caps off, the grey plastic makes it look very fisher price to me.

Picture not included in this copy
kimonaHuntington Bch, CA · Feb 15, 2009#11
IMHO, black steel wheels make your nice Yaris look like a scrapper!

If you really must remove the wheel covers, maybe you could polish the steel wheels, install trim rings and a centre cap.
matthewboiiSanta Rosa, California · Feb 15, 2009#12
i painted my sedans wheel covers..

because i am dead broke and cant afford cosmetics atm..

1 attachment not included in this copy

matthewboiiSanta Rosa, California · Feb 15, 2009#13
heres one more.

1 attachment not included in this copy

matthewboiiSanta Rosa, California · Feb 15, 2009#14
thanks ^_^

i appreciate it especially because i have never spray painted anything in my freakin life ahaha

now for some tanabe nf210s and a swaybar...


cant wait for those sickkk led halo headlights...
WeeYariGeorgetown, Ontario, Canada · Feb 15, 2009#15
Steelies + trim rings + chrome nuts.
RyuSurrey, BC · Feb 15, 2009#16
If you don't plan on getting wheel, I've done some painting on the hub cap in the past.
Maybe they might give you some good idea.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
SilverBackEl Monte, Ca · Feb 15, 2009#17
Factory alloys FTW😛
GideonSunnyvale, CA · Feb 15, 2009#18
Originally Posted by WeeYari ↑
Steelies + trim rings + chrome nuts.
+1

I rocked that for quite awhile, I think it looks great.

1 attachment not included in this copy

2006frontySan Bernardino · Feb 15, 2009#19
That does look pretty good^^^^^^^
rningonfumesSoCal · Feb 15, 2009#20
Gideon, do you have more pics like that? That's hot. I was thinking of doing the racing wheel moon covers, but yours is a nice alternative to the idea.
NJBobSouth Jersey · Feb 15, 2009#21
I like RYU's 3d pic and Gideon's right on with the trim rings.
Black YarisToledo, OH · Feb 15, 2009#22
paint the stock covers.... it is cheep and easier than masking off your wheel to paint them

I vote for hot pink wheel covers
kimonaHuntington Bch, CA · Feb 15, 2009#23
Gideon's Vitz looks great!

1 attachment not included in this copy

CtrlAltDefeatThread starterIndianapolis IN · Feb 15, 2009#24
Originally Posted by WeeYari ↑
Steelies + trim rings + chrome nuts.
Originally Posted by Gideon ↑
+1

I rocked that for quite awhile, I think it looks great.
Wow, that is nice! That's exactly what I'll do I think... but where do you get thoes parts?
PHXDEMONPhoenix, AZ · Feb 15, 2009#25
Get a set of these wheels.
Picture not included in this copy
Klink10910 · Feb 15, 2009#26
Yea I like Gideons and remember seeing them along time ago. Again wax to shine and check Advance, Auto Zone or the other big name here in NC for Honda lug nuts...they were like a 1.50 apiece. Honda parts wanted 6.50 apiece. Trim rings not to sure of.
GideonSunnyvale, CA · Feb 15, 2009#27
Originally Posted by rningonfumes ↑
Gideon, do you have more pics like that? That's hot. I was thinking of doing the racing wheel moon covers, but yours is a nice alternative to the idea.
Here's a few more before I installed my DFs:

The trim rings you can pick up at any auto store. I got two for free from an America's Tire Company. They sometimes keep old trim rings after people purchase new rims. The other two I bought for around $30 at Kragen's.

The centercaps are from NAPA, from the balkamp catalog #730-2411. They're very cheap, like $2 for a two pack or something I can't recall. They don't fit snugly though, so what I used was some sticky tape for emblems and outside automotive trim pieces and coated the inside with it to close the gap. They fit very well and stayed on for several hundred miles at high speed, until I swapped rims and tires.

2 attachments not included in this copy

Benggolf2Richmond, B.C., Canada · Feb 16, 2009#28
Yes, trim rings and center caps is definitely the way to go in lieu of alloys. Nice set-up Gideon! 👍
kimonaHuntington Bch, CA · Feb 16, 2009#29
Originally Posted by Benggolf2 ↑
Yes, trim rings and center caps is definitely the way to go in lieu of alloys. Nice set-up Gideon! 👍
Actually, I think it looks better than some alloys I've seen!
YarisSedanCalifornia - Bay Area · Feb 16, 2009#30
Heres my hubcaps im rolling....

Picture not included in this copy

Picture not included in this copy
YarisSedanCalifornia - Bay Area · Feb 16, 2009#31
Picture not included in this copy

And heres one of me test fitting my acura rims on my yaris.
YarisSedanCalifornia - Bay Area · Feb 16, 2009#32
Picture not included in this copy



A night shot of my hubcaps and one up close

Picture not included in this copy
cali yarisCanoga Park, CA · Feb 17, 2009#33
Gideon FTW, that rocks, best treatment of stock wheels ever.
kimonaHuntington Bch, CA · Feb 17, 2009#34
I think Toyota should take note here: Drop the plastic wheel covers, sell the Yaris with steel wheels, trim rings, centre caps, and chrome lugs, and offer factory alloy wheels as an option.
OchFort Washington · Mar 12, 2009#36
I painted my hubcaps matte black. And then i put red lining around the edges. It looks pretty cool to me. Tell me what you think...

4 attachments not included in this copy

Red HorseCosta mesa, California · Mar 12, 2009#37
Mine to

1 attachment not included in this copy

Benggolf2Richmond, B.C., Canada · Mar 12, 2009#38
Effective and cool mod. 👍
YAR1SRaleigh, NC · Mar 12, 2009#39
Originally Posted by jonismyname ↑
http://picasaweb.google.com/lh/photo...eat=directlink

same as gideon.

DO NOT ROCK TRIM RINGS ON SALTY ROADS
won't last a single day. seriously. not even a day.
well. maybe a day. if you cleaned them afterward. but not two.
haha learned this the hard way now i have salt spots on my new trim rings, i swear though the salt was only on there from over night 🤷
they dont bad enough to remove though..... going to try to get some dust caps.

I went the other day but they only had two and one was dull as compared to it's shiny companion...😢
whiteghettoportland oregon · Mar 12, 2009#40
I painted my stock wheel covers flat black
OchFort Washington · Mar 13, 2009#41
i really like the hubcaps flat black. I didn't spend much on it, but the effect is amazing...unlike the stock, which looked soooo plastic. The lining gave a contrast to the all black wheel and tires.

Redhorse, i like the blue line too. Whiteghetto, post some pics of your baby! :)
jdinrcSouthern California · Mar 13, 2009#42
Originally Posted by YAR1S ↑
haha learned this the hard way now i have salt spots on my new trim rings, i swear though the salt was only on there from over night 🤷
they dont bad enough to remove though..... going to try to get some dust caps.

I went the other day but they only had two and one was dull as compared to it's shiny companion...😢
Get some Simichrome Polish. If the salt hasn't burned all the way through the chrome plating, this will shine it up a treat. And you could probably shine up the dull one from the store too.👍
http://www.simichrome-polish.com/
HTM Yarissouth Carolina · Mar 13, 2009#43
Hubcaps are ghetto ........😁

Unless the are nicely painted .

Hubcaps are a safety issue for me ...They always fly off
HTM Yarissouth Carolina · Mar 13, 2009#44
Hey YAR1S , go to a metal fabrication shop (kitchen equipment) and see if they will make some stainless hub rings ...... Polished or #5 finish
TLyttleKeremeos BC · Mar 13, 2009#45
Wheel covers, Red Horse, those are wheel covers...
HANZO_187Wintergarden, FL · May 26, 2013#46
I had a hard thought about all of this...and now I'm totally gonna do the trim rings and center cap bits for my wheels to get a stylish look with out breaking the bank and polish my wheels.
1.5Tampa · May 26, 2013#47
resurrection!!!!
Chuck GThe Great Northwest · May 26, 2013#48
I actually like the Yaris wheel covers
HANZO_187Wintergarden, FL · May 27, 2013#49
(Shang Sungs Voice)- IT HAS BEGUN! (lmao)

Yeah dude so after seeing some ones Yaris on here with polished steelies and some trim rings and center caps I said...Why not. lol Its clean, I can make the trim and caps a nice black and It can make my car stand out more.
ron3Knoxville TN · Oct 23, 2013#50
I have a set of those trim rings {stainless} with centers for sale or trade . I live in Knoxville TN