chrisjOriginal postS. Jesus, Kentucky · Sep 11, 2010#1I just got the fog light kit from Garm and MicroImage. I am thinking of installing them to run off the park lights instead of a separate switch. As far as the wiring goes, it should be loads easier doing it that way, and to be honest, having that fog light switch on the center console would mean either they would a) hardly be used or b) be left on accidentally.
I would just as soon have it easily turned on with the parking lights. Anyone done this?
BTW, I have an '09 5-dr LB.
Replies 39
1NZYaris1New Zealand · Sep 11, 2010#2 Originally Posted by
chrisj ↑ I just got the fog light kit from Garm and MicroImage. I am thinking of installing them to run off the park lights instead of a separate switch. As far as the wiring goes, it should be loads easier doing it that way, and to be honest, having that fog light switch on the center console would mean either they would a) hardly be used or b) be left on accidentally.
I would just as soon have it easily turned on with the parking lights. Anyone done this?
BTW, I have an '09 5-dr LB.
If you got the latest kit from Garm
return it and ask him for the non modified kit
it will wire into your park lights a lot easier
than the new kit will .
As the new Modified MI Kits are a factory setup
and plug and play .👍
chrisjThread starterS. Jesus, Kentucky · Sep 11, 2010#3Thanks for the advice on that! I hate to send the whole thing back. Wonder if I could just buy the wiring kit for the park lights and have them air-shipped? I wanna get them on ASAP. :)
1NZYaris1New Zealand · Sep 11, 2010#4yeah i would PM Garm or phone him 👍
chrisjThread starterS. Jesus, Kentucky · Sep 11, 2010#5Good deal. Thx.
auxmikeLI, New Yawk · Sep 11, 2010#6I wired mine in through the underhood junction black.
I then used the OEM real Toyota relay I bought on Ebay for $15 to avoid an aftermarket wire job and chinese relay.
I had found an excellent writeup by a member "ClownCar". Made the whole install real easy with pics too.
chrisjThread starterS. Jesus, Kentucky · Sep 11, 2010#7I know this may sound a bit dodgy, but couldn't you just tap into the park light wiring and splice the fogs in? I have hooked up tons of extra lights on trucks through the years and I just found some power and spliced in. Of course I would want the fogs coming on only when the park lights are turned on, so this might be a problem. I tend to break everything down to as simple as possible, but I don't want my car on fire either. :)
CTScottUSA, CT · Sep 11, 2010#8You can use what you have in hand.
1. Install the under hood wiring, including the pigtail that connects the fogs to the connector in the under hood fuse panel.
2. Insert the relay included with the kit in the OEM slot in the under dash fuse panel. Once you do that the fog wiring is complete to the OEM headlight stalk (but of course you don't have the stalk with the fog light switch, so they won't turn on).
3. Pin #3 (yellow wire) on the head light stalk is now the wire that needs to be grounded to turn the fogs on. In the OEM setup that happens by the fog light switch connecting pin 3 to pin 4 (orange wire). In your case, to make them turn on with the parking lights, you simply need to jump the yellow wire in pin 3 to the white wire in pin 13.
Picture not included in this copy1 attachment not included in this copy
sleey0PA · Sep 11, 2010#9Where is that connector in you pic from? The inside/dash fuse box?
So all we have to do to get these to turn on with parkers is splice using a 3m quick tap 3 + 13 (along with the other steps you mention)?
This correct?
Dude, you are like a friggin manual on the Yaris. I think Toyo should hire you:p
CTScottUSA, CT · Sep 12, 2010#10 Originally Posted by
sleey0 ↑ Where is that connector in you pic from? The inside/dash fuse box?
So all we have to do to get these to turn on with parkers is splice using a 3m quick tap 3 + 13 (along with the other steps you mention)?
This correct?
Dude, you are like a friggin manual on the Yaris. I think Toyo should hire you:p
That's the headlight stalk connector (at the base of the headlight stalk, under the lower steering column cover).
Correct on the splice.
sleey0PA · Sep 12, 2010#11Ahh, got it.
Thanks a bunch, ct!!
One more - what guage wire do you think that is? I have a bunch of different taps laying around and want to use the right one:)
CTScottUSA, CT · Sep 12, 2010#12 Originally Posted by
sleey0 ↑ Ahh, got it.
Thanks a bunch, ct!!
One more - what guage wire do you think that is? I have a bunch of different taps laying around and want to use the right one:)
It's 0.5mm, which is 24 AWG.
sleey0PA · Sep 12, 2010#13Thanks, again:D
1NZYaris1New Zealand · Sep 13, 2010#14i can send you a junmper cable that is plug and play
or maybe Ct Scott can make you 1
Also Ct i have added these instructions to the MI kit
i hope you dont mind .
PM me if you need more PINs 👍
sleey0PA · Sep 13, 2010#15Jumper cable?
Can you please explain this?
Thanks!
CTScottUSA, CT · Sep 13, 2010#16 Originally Posted by
sleey0 ↑ Jumper cable?
Can you please explain this?
Thanks!
Actually, for what we were discussing above, just a tap splice is all that is needed.
sleey0PA · Sep 13, 2010#17Yeah, that was what I am going to do.
I just wasn't too sure what he meant by jumper cable.
1NZYaris1New Zealand · Sep 14, 2010#18 Originally Posted by
sleey0 ↑ Jumper cable?
Can you please explain this?
Thanks!
Here you go, i will have some at MI in a week .👍
1 attachment not included in this copy
chrisjThread starterS. Jesus, Kentucky · Sep 14, 2010#19So, in CTScott's picture above, as long as the wires from 3 is connected to 13 with a splice, the fog lights will come on with the park lights?
sleey0PA · Sep 14, 2010#20Yep.
Just make sure to wire the rest the oem way and you are set.
CTScottUSA, CT · Sep 14, 2010#21Correct. And Ray's (1NZ's) pigtail pictured above, lets you do the mod without cutting into the OEM wires. With his you pop the pins, connect them to his one pin connectors, and the splice happens within his harness.
chrisjThread starterS. Jesus, Kentucky · Sep 14, 2010#22I appreciate the help. I'm not installing the fog lights myself. A custom shop is doing it, and although they say they've done these before, I printed out all these instructions to make sure the lights get wired up to the parks. I'm getting the fogs installed at the same time I get 3 little dings fixed.
Although the separate switch is nice, it would never work for me. I'd be calling for a jump all the time (leaving them on).
CTScottUSA, CT · Sep 14, 2010#23 Originally Posted by
chrisj ↑ I appreciate the help. I'm not installing the fog lights myself. A custom shop is doing it, and although they say they've done these before, I printed out all these instructions to make sure the lights get wired up to the parks. I'm getting the fogs installed at the same time I get 3 little dings fixed.
Although the separate switch is nice, it would never work for me. I'd be calling for a jump all the time (leaving them on).
In that case, check out my headlights off with ignition DIY. My Subaru had auto off headlights, and I got so used to it that I kept leaving my Yaris' lights on:
DIY - Headlights off with the Ignition Switch henrystyleEast Stroudsburg · Feb 12, 2011#24 Originally Posted by
1NZYaris1 ↑ If you got the latest kit from Garm
return it and ask him for the non modified kit
it will wire into your park lights a lot easier
than the new kit will .
As the new Modified MI Kits are a factory setup
and plug and play .👍
New to the site. I want some foglights installed on my 2010 5 door yaris in the same manner.
Question. Who is Garm and where can I buy this latest kit your talking about?
Is this it?
http://shop.microimageonline.com/Fog...-foglights.htm MadMaxSan Antonio, Texas! · Feb 12, 2011#25 Originally Posted by
henrystyle ↑
Yep, that's Garm and probably one of the best vendors on this site! 👍
swiddCentral Alabama, GOD BLESS AMERICA · Feb 12, 2011#26By "fog lights on with the parking light switch", that means they are on when the stalk is in the middle position, off when in off position, and off in the running light position? Or do the fog lights also go on with normal running lights on (stalk in "night"/running lights position)?
I'm on the fence about fog lights pending a proper way to get a switch solution for them.
henrystyleEast Stroudsburg · Feb 19, 2011#27Tagging along
bB2NERW.TN · Feb 19, 2011#28 Originally Posted by
MadMax ↑ Yep, that's Garm and probably one of the best vendors on this site! 👍
I'm gonna order that kit.
So all I do to make them come on with the parking lights is connect the yellow wire to the white wire? Can I just use a small piece of wire with 2 wire taps to connect them?
henrystyleEast Stroudsburg · Mar 2, 2011#29Do the park light mod instructions come with the kit as well as the jumpers?
Just ordered mine.
pennyracergrants pass · Mar 9, 2011#30hi is there a h.i.d fog lights i want to match the light color blue with my h.i.d head lights ? please help also looking for that wire harnes adapter to run on stock light controll no need for switch in console help help
pennyracergrants pass · Mar 9, 2011#31if a set is out there for sale does anyone know ware to get it ? please advise
cali yarisCanoga Park, CA · Mar 10, 2011#32what color are your headlight HID's?
blue is 10000k to 12000k usually. could get a set of H11 to match.
pennyracergrants pass · Mar 10, 2011#33yes they have a blue tint to them do you have them for sale and i want to run them off the factory light controll stack dont want to run any more wires thru the firewall right now thanks for any help you can give me
pennyracergrants pass · Mar 10, 2011#34just found out they are 8000k does this help my h.i.d. power paks are up in the fender well back in ware the from window piller post come over the top of firewall i dont like looking at extra non factory parts if possible
pennyracergrants pass · Mar 10, 2011#35had to ask the guy i purchased the lights from got the info ready to buy matching fogs
cali yarisCanoga Park, CA · Mar 10, 2011#36You need a foglight kit + an HID kit, right?
pennyracergrants pass · Mar 10, 2011#37oh okay not a all in one kit have to changr the bulbs out ? do you sell them ? looking to buy a nice set thanks for all the help
cali yarisCanoga Park, CA · Mar 10, 2011#38pennyracergrants pass · Mar 10, 2011#39okay cool thank you for the help and i can tap into wiring under the hood not run wires thru the firewall correct not heat problems with the hid in the fog cans ? thanks again for all the info
pennyracergrants pass · Mar 12, 2011#40im seeing kits that come with the h11 bulbs what your thoughts ? i would like to make sure if i mount the fogs lights i will not be rewiring the sencond set if i have to change the bulbes i will buy from micro image if its a one shot deal i dont like doing things twice please advise for can i call you not sure i saw a phone number on your site ? thanks again