Yarisworld Archive

turbo feed lines

11 posts · 4,197 views

1.5tyOriginal postSalisbury nc · Sep 6, 2010#1
where is the best place to tap a oil feed line on a 09 yaris

Replies 10

cali yarisCanoga Park, CA · Sep 6, 2010#2
one good place is where the pressure sensor is.
1.5tyThread starterSalisbury nc · Sep 6, 2010#4
thanks for the help
pimp my yarischicago · Sep 6, 2010#5
I tapped at the pressure sensor. My oil feed line came with a T-fitting to mount the sensor and line.
1.5tyThread starterSalisbury nc · Sep 6, 2010#6
i know this is a dumb ? but where can i find the oil sensor Ive looked all over the engine bay and didn't come across it
Focus_Sh1ftNew Jersey · Sep 6, 2010#8
Originally Posted by sleey0 ↑
Can that be used as a drain/return line as well?
Haha, I asked the same thing originally. No, it can't be because the oil filter is pressurized. It can only be used as a feed (that means it can be used for oil pressure readings as well).

Originally Posted by 1.5ty ↑
i know this is a dumb ? but where can i find the oil sensor Ive looked all over the engine bay and didn't come across it
Yeah, it's stupidly difficult to get at. It's right by the starter, and directly under the intake manifold. I'm pretty sure you'd have to take the manifold off, because I couldn't even get at it from the bottom.
Bluevitz-rsOshawa, Ontario, Canada · Sep 6, 2010#9
It's so easy to get at from the bottom. Just take the starter off. It's two 14mm bolts.
pimp my yarischicago · Sep 6, 2010#10
If U removed the front bumper cover witch is pretty easy and then U removed the plastic shroud that is to the left of the radiator [two plastic clips hold it in]. You will be able to get it from the front very easily. Wide open working conditions. If your installing a intercooler U will need to remove the bumper cover anyway. You will need a 24mm deep well socket to remove the sensor.
1.5tyThread starterSalisbury nc · Sep 6, 2010#11
thanks again guy right now i have a turbo kit on the was ill let yall know how its going