Yarisworld Archive

Pedals

27 posts · 9,957 views

eazyaceOriginal postMiami · Aug 30, 2010#1
I was wondering if anyone had installed some aftermarket pedals?
If so what brand and if possible a DIY would be great.

The only pedals I have found that I really like are those cheap ones that you find in discount for 22$. I think they are the Pilot motorsport brand which only installs by clamps. I have been considering this for a while but are the clamps safe? Im not in the mood to be drilling holes into my pedals.

Thanks for the input. 👍

Replies 26

auxmikeLI, New Yawk · Aug 30, 2010#2
I bought these from Toyota.
They slip right on and require no drilling or screws or clamps.

1 attachment not included in this copy

djct_wattThailand · Aug 31, 2010#3
My experience with pedals is that they ALWAYS slip off, no matter how expensive the brand. They only way to make certain is to drill them on, or you use the OEM slip on covers (since they are custom formed, they are near impossible to accidentally slip off).

I don't know, but they're just pedals. . . is it worth having an accelerator/brake/clutch malfunction because you wanted pretty pedals? Be safe about it. . . drill or buy OEM.
henry33slovakia · Aug 31, 2010#4
auxmike : how much did you paid for them ?
DeathBeardLos Angeles, CA · Aug 31, 2010#5
Get the Toyota ones..they fit VERY securely
hatchbackkid82. · Aug 31, 2010#6
I've had these on my car for like 3 years never had a problem with them
Meteorite_MartyWaterloo, Ontario, Canada · Aug 31, 2010#7
I have the Genuine Toyota sport pedals; never a problem and fit perfectly.
djct_wattThailand · Sep 1, 2010#8
To clarify, when I said OEM, I meant the OEM slip on upgrade covers, like auxmike mentioned. I have the same ones on my Yaris, and the same on both my xA and tC. They're usually around $40-60.
henry33slovakia · Sep 1, 2010#9
that is reasonable price. it look nice I think I will go for them ;)
auxmikeLI, New Yawk · Sep 1, 2010#10
They fit on real tight and look great!👍
djct_wattThailand · Sep 1, 2010#11
For me, it's always been about function. I have huge feet so I never slip my foot off the pedal... But because of Toyota's upright seating position, you don't really push forward and back on the pedals, but rather down, causing the pedal to go forward while the foot slides backwards on the pedal, as the heel is planted. Proper operation would result in lifting the heel off the ground, unsupported, which is not doable. Normally it's no issue, but if it's raining and my shoes got wet from outside, the rubbing on the rubber pedal causes an ungainly squeaking noise, like a worn out windshield wiper blade, and it drives me nuts. Metal pedals solve this problem. It's not an issue with lower seated cars with feet stetched out in front of you. Normally, cars, trucks, and busses with upright seating have pedals that feed into the floor, with the axis of rotation near the heel, rather than under the dash...
DeathBeardLos Angeles, CA · Sep 1, 2010#12
Word of advice about installing the Toyota pedals is to soak them in hot soapy water for several minutes prior to installing them
Jason@SportsCarDebary, FL · Sep 1, 2010#13
Originally Posted by eazyace ↑
I was wondering if anyone had installed some aftermarket pedals?
If so what brand and if possible a DIY would be great.

The only pedals I have found that I really like are those cheap ones that you find in discount for 22$. I think they are the Pilot motorsport brand which only installs by clamps. I have been considering this for a while but are the clamps safe? Im not in the mood to be drilling holes into my pedals.

Thanks for the input. 👍
We are using the Sparco Race pedals. Not much to look at, but they offer good grip and are a nice size.

You have to remove the OE covers, and drill some holes, but it is an easy mod.

http://www.sparcousa.com/ptuning_pedals.asp?id=339
cali yarisCanoga Park, CA · Sep 1, 2010#14
^ those are nice. Jason, is heel/toe easy for you in this car? I think the gas pedal is a little far back to make that easy. I took off my clutch and brake pedal covers and replaced them with grip tape - that gave me a 1/4" change.
Jason@SportsCarDebary, FL · Sep 1, 2010#15
Originally Posted by cali yaris ↑
^ those are nice. Jason, is heel/toe easy for you in this car? I think the gas pedal is a little far back to make that easy. I took off my clutch and brake pedal covers and replaced them with grip tape - that gave me a 1/4" change.
Ours are especially blingy, we got the red ones. 😆

No, heel/toe in the Yaris is a pain, it is one of the most frustrating cars I have found. We went the other way and put a 1/4" aluminum spacer under the brake pedal cover to help even it up with the throttle. I also changed to a low top driving shoe to help get enough articulation, even then I often found myself pegging the throttle and banging the limiter on downshifts. 😠

I was ready to change the pedals again, but we found moving the steering wheel and seating position (further back and down) seemed to fix the problem. I did not have any problems at the Miller race with the new setup.
eazyaceThread starterMiami · Sep 1, 2010#16
I took the leap and bought the cheap discount auto parts pedals. I am pretty happy. The quality isnt the best but I didnt pay much for them. I will take a picture one of theses days and post it. Next up on my list is to find that 12 walmart exhaust part. : )
TickleTimeTimArkansas · Sep 1, 2010#17
bargain buyer, eh? good choice
SleepwalkerVictoria, Australia · Sep 16, 2010#18
In regards to the genuine Toyota sports pedals? What exactly is involved with installing? Do they just sit on top of the stock pedals or do I need to remove the stock pedals and replace them with the genuine sports pedals?
djct_wattThailand · Sep 16, 2010#20
Originally Posted by Sleepwalker ↑
In regards to the genuine Toyota sports pedals? What exactly is involved with installing? Do they just sit on top of the stock pedals or do I need to remove the stock pedals and replace them with the genuine sports pedals?
Peel off the rubber covers for brake and clutch (gas pedal isn't removed), slip on (force the rubber) onto the pedals. It's like sticking a Shaq's foot in a women's size 6 boot. . . It's pretty intuitive and real easy.
SleepwalkerVictoria, Australia · Sep 16, 2010#21
Originally Posted by djct_watt ↑
Peel off the rubber covers for brake and clutch (gas pedal isn't removed), slip on (force the rubber) onto the pedals. It's like sticking a Shaq's foot in a women's size 6 boot. . . It's pretty intuitive and real easy.
Thanks for that information. What exactly happens with the accelerator pedal? Does it just mount on top of the current stock pedal?
sleey0PA · Sep 16, 2010#22
Buy them and find out. Its the easiest mod one can do:)
eazyaceThread starterMiami · Sep 16, 2010#23
^ x2
SleepwalkerVictoria, Australia · Sep 16, 2010#24
Does Garm stock these or does anyone know of a vendor I can purchase them from that will ship to Australia?

Thanks for all the help guys. :)
cali yarisCanoga Park, CA · Sep 16, 2010#25
I'm stocking the NRG ones, they will be in tomorrow. I do ship internationally
SleepwalkerVictoria, Australia · Sep 16, 2010#26
Are they a similar install to the genuine Toyota pedals?
nightstalkeranaheim, ca · Sep 17, 2010#27
i have a set of razo pedals and just drilled them on. Have had no problems with them,but really its your own personal preference