got the same one's (microimage ftw)Originally Posted by MadMax ↑I just ordered a set from Garm, I so hate those cheap-o stock side markers and think the smoked ones from MicroImage will look so sweet on my Black Sand Pearl HB! 👍
I'll post pics once I get them on!
Cheers! M2
side marker lights
152 posts · 50,871 views · page 3 of 4
Replies continued
Can the white transparent plastic thing be removed from the housing and smoked?
Keep us updated, I'm in w/ you if this can be worked around easily. Thanks🤘Originally Posted by Jerkratt ↑ok ima try and see if all of them are the same.. i see the x3 has them aswell
will do ill be picking them up sometime next week.. hours got cut at work so i dont have the money this week
yea i feel you. I barely got 20 hours this week, had 8 hours to begin with :(
Side markers is my budget mod i can afford as of now~
Side markers is my budget mod i can afford as of now~
well i see that the suv's have slightly fatter side markers then the normal cars.. so im going to go to the dealer and take mine out and size them... im going to measure the hole opening aswell and bring a ruler with me to the dealer so i can see if there will be a gap
Easier idea... pop out one of your side markers, hold a piece of paper on the side of your car, and trace the outline of the hole. It'll be easy to see if the BMW marker will cover it then. 👍Originally Posted by Jerkratt ↑well i see that the suv's have slightly fatter side markers then the normal cars.. so im going to go to the dealer and take mine out and size them... im going to measure the hole opening aswell and bring a ruler with me to the dealer so i can see if there will be a gap
i went there today and got some part numbers... im going to go back next week and have them give me one of each and compair them.. the 3 series does not fit correct...
2 1/2" x 1" is the opening of the fender
I got my set in the mail today (thanks Garm! 👍) and they are 'plug and play' but the other end of the harness has to be plugged in to a certain polarity so if they don't work just unplug 'em and swap the plug around to reverse what you had the first time!Originally Posted by cali yaris ↑alright, another bump for the updated thread, since I sell these since those old days (smoked or clear):
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Now, I could still use a little help. These new side markers are a bit loose on my car. The original ones were a tad loose; but these are much looser, almost to the point where you can pull them off the car quite easily. So, I was wondering if 1) anyone else had this problem, and 2) if they did, what did they go to fix it?
Cheers! M2
OK, no advice then, huh? I was wondering if some silicon adhesive or sealant would be the way to go...thoughts?
By the way, I went outside now that is dark and this is when the side markers that Garm sells really shine! They are much brighter and noticeable than the stockers, and a heckuva look cooler looking! The blend in much better on my black hatchback, I'll take some pics over the weekend to show everyone.
This is a great mod, easy to do and not too expensive!
Cheers! M2
By the way, I went outside now that is dark and this is when the side markers that Garm sells really shine! They are much brighter and noticeable than the stockers, and a heckuva look cooler looking! The blend in much better on my black hatchback, I'll take some pics over the weekend to show everyone.
This is a great mod, easy to do and not too expensive!
Cheers! M2
Just paint the stock ones with TAMIYA PS-31 SMOKE great results and very easy, still shine super bright at night and day had them on for two years and they look like they were done yesterday.
2 attachments not included in this copy
madmax, I would use a spot of silicone to get those to not move around.
kou, those look pretty good!
kou, those look pretty good!
Thanks cali.
@ kou: they look very nice! how did you take the part to be smoked off the whole thing?
I did the same thing as kou with a set of flush motorcycle turn signals, except using orange paint (the bike is orange where they are), also Tamiya. I will see if I can find the instructions but it is pretty easy. It is pretty much remove the marker lights (easily done), cut some cardboard so only the outside is exposed (make the holes like the ones in your fender), and put on numerous light coats letting dry for about 10-15 minutes between each. Continue to do so until you reach the desired color.
Garm, thanks for the tip on silicon, I will get some today. The marker lights you sold me look excellent!
Cheers! M2
Garm, thanks for the tip on silicon, I will get some today. The marker lights you sold me look excellent!
Cheers! M2
Did you spray them on the outside?
yes, just take them off the car clean them then spray them.Originally Posted by StefanVVTi ↑Did you spray them on the outside?
What side marker of the SUVs did you compare? The X3 or the X5? Or even maybe the X6....Originally Posted by Jerkratt ↑2 1/2" x 1" is the opening of the fender
thanks for the sizes bro.
Hi
In Europe the side markers are clear on the Toyota Yaris. If anybody need a pair I can buy them for you and ship them.
Regards Steven.
In Europe the side markers are clear on the Toyota Yaris. If anybody need a pair I can buy them for you and ship them.
Regards Steven.
Thanks a lot! 😎 I`ll probably do them next weekend!Originally Posted by kou ↑yes, just take them off the car clean them then spray them.
StevenOriginally Posted by Danish Yaris ↑Hi
In Europe the side markers are clear on the Toyota Yaris. If anybody need a pair I can buy them for you and ship them.
Regards Steven.
The side markers in the US are clear as well, they are the same ones I saw in Germany, Austria and the UK; which is why folks here are painting or replacing them...
But it was very nice of you to offer! 👍
Cheers! M2
Hi
Ok, I thought they were yellow in the states.
I work at Toyota in Denmark, so if you need some special European parts I can help you guys.
Regards Steven.
Ok, I thought they were yellow in the states.
I work at Toyota in Denmark, so if you need some special European parts I can help you guys.
Regards Steven.
Thanks....I saw somewhere here that a person from Cypress had posted a kit for the hatchback from Toyota used in lieu of the rear seat for utility type work. I tried contacting him but he never came back. Have you ever seen anything like this where you are? US has no idea what it is and the part number when I checked didn't ring any bells. Thinking maybe it's a Europe accessory.Originally Posted by Danish Yaris ↑Hi
Ok, I thought they were yellow in the states.
I work at Toyota in Denmark, so if you need some special European parts I can help you guys.
Regards Steven.
ok so i got the side markers and the connectors from bmw mad cheap found someone who works there... im in the proses of dremaling the side markers a bit... the plastic on the back is a little to wide
Jerkratt, looking forward to an installed pic.
HiOriginally Posted by Klink10 ↑Thanks....I saw somewhere here that a person from Cypress had posted a kit for the hatchback from Toyota used in lieu of the rear seat for utility type work. I tried contacting him but he never came back. Have you ever seen anything like this where you are? US has no idea what it is and the part number when I checked didn't ring any bells. Thinking maybe it's a Europe accessory.
I have sent a PM to you.
Regards Steven.
^ u got part numbers? i would like to know info aswell :D
Jerkratt you came through! If you can, do a simple DIY for it please. I can do this at work if a dremel is all that is needed :D
u got it still working on the dremaling.. at work atm on my cell so yeah but it will be done! and when it is pics for everyone! hehe
"dremaling"? sorry, but LOL
awesome. Its the quality of his work I'm looking for, not his words lol. Btw, how much did the side markers and connectors end up costing you?
LOL, I wrote that once and got flamed but I got a 2nd grade English from Orange, New Jersey 🙂Originally Posted by cali yaris ↑"dremaling"? sorry, but LOL
LOL this where I got my mayor in the 2nd grade English I know:Originally Posted by cali yaris ↑
http://www.privateschoolreview.com/s...chool_id/17562
Back to topic pics?
I wonder what's happened to Jerkratt and the side marker light project?
Jerkratt! how'd the side marker light project turn out dude?
I'll pm him..
I'll pm him..
i made a video as well. sorry i didnt really take the time to take step by step pictures
Picture not included in this copy
Picture not included in this copy
3 attachments not included in this copy
That's pretty cool!!
did you take them off recently? garden state show picture doesn't show them?
maybe he only has the right one on 😉
that would be JERKRATT😆
otherone will be on by street wars... have not had the time to finish dremaling the otherside
🆘🆘🆘🆘 need the diameter and mesurements so i can cut and install mine got them from sard from garm thanks
2 1/2" x 1" is the opening of the fender
😳 sorry to blow up the spot there but i wanted a better look and noticed. take some pictures of street wars as i'll be sitting out.Originally Posted by Jerkratt ↑otherone will be on by street wars... have not had the time to finish dremaling the otherside
its all good. Looks hella nice dude. When you do get the chance, could you take a pic of one popped out just so i could see the cut, cause a DIY is sorta late now anyways :P...
unless Bxrich can provide everyone one on here ^_^
unless Bxrich can provide everyone one on here ^_^
I just got my smoked side repeaters. Looks like they're the same like garm sells, but mine were plug & play... Maybe EU connectors are different?
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
yes, you have compatible connectors, USA cars don't. Looks good!