Yarisworld Archive

Mesh grill installed

75 posts · 31,615 views · page 1 of 2

Kaotic LazagnaOriginal postCentral Valley, CA · Feb 16, 2007#1
ok, i installed my mesh grill yesterday. it took longer and was harder than i thought it would be. but here it is. it's nothing flashy, so don't expect too much.

2 attachments not included in this copy

Replies 74

Kaotic LazagnaThread starterCentral Valley, CA · Feb 16, 2007#2
more pics...

2 attachments not included in this copy

Kaotic LazagnaThread starterCentral Valley, CA · Feb 16, 2007#3
more...

3 attachments not included in this copy

BlenjarCT · Feb 17, 2007#4
nice!!...

take sum far picture..!
it was nicely done...i cant believe u did it urself..

-- Blen
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#5
Originally Posted by Blenjar ↑
nice!!...

take sum far picture..!
it was nicely done...i cant believe u did it urself..

-- Blen
thanks for the compliment. i haven't taken my car out of the garage ever since i installed it, but i'll be using my Yaris instead of the Camry tomorrow when i go to work. i'll try to take some far away pics after or before work. thanks again and i'm sure that you can do it yourself too.
ViolinNew Jersey · Feb 17, 2007#6
Yeah - nice neat install.
BlenjarCT · Feb 17, 2007#7
u have a camry to..lol 2 cars? why!
sell the camry and get more stuff for hte yaris..

-- Blen
nevermorezVancouver · Feb 17, 2007#8
Nice mod!
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#9
Originally Posted by Violin ↑
Yeah - nice neat install.
Originally Posted by nevermorez ↑
Nice mod!
thanks.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#10
Originally Posted by Blenjar ↑
u have a camry to..lol 2 cars? why!
sell the camry and get more stuff for hte yaris..

-- Blen
lol...oops, should have mentioned that it's my dad's Camry. i'm teaching my brother how to drive (when ever i have some free time and it's not raining). there's no way i'm teaching my brother how to drive in my Yaris, it's new and a m/t. lol...sorry about that.
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Feb 17, 2007#11
good install but personally i think it looks crappy. had the same setup on my civic hatch.......
MrMondayNiteNY/NJ · Feb 17, 2007#12
Great job on the install, looks better than it did and for the price you can't beat it. I had a similar grill from Grilletech on my old 01 civic and paid alot more than you did.
YarisGuyUSA · Feb 17, 2007#13
Looks cool, take some more pics from farther away.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#14
Originally Posted by ROCKLANDTOYOTA ↑
good install but personally i think it looks crappy. had the same setup on my civic hatch.......
why do you think it looks crappy? i went for the flat black so it won't be too noticable. i don't want a ruined radiator or A/C compressor...
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#15
Originally Posted by MrMondayNite ↑
Great job on the install, looks better than it did and for the price you can't beat it. I had a similar grill from Grilletech on my old 01 civic and paid alot more than you did.
yeah, for 10 bucks or so, i think it's a decent mod.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#16
Originally Posted by YarisGuy ↑
Looks cool, take some more pics from farther away.
thanks. i just took some pics, but i don't think you can see it in the pics. you can see it in person though. i'll post some pics in a few minutes.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#17
you probably can't see the grill from the front view.

3 attachments not included in this copy

Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#18
a couple more tries at the front view.

2 attachments not included in this copy

yrsdrgnSF,CA · Feb 17, 2007#19
cool. now if only you could replace the front with the same material
Kaotic LazagnaThread starterCentral Valley, CA · Feb 17, 2007#20
Originally Posted by yrsdrgn ↑
cool. now if only you could replace the front with the same material
which front?
yrsdrgnSF,CA · Feb 17, 2007#21
oops haha i meant the top area under the toyota emblem
BlenjarCT · Feb 17, 2007#22
the engine grill..

-- Blen
nevermorezVancouver · Feb 18, 2007#23
That looks a lot better! Nice Job.
eTiMaGoBangkok, Thailand · Feb 18, 2007#24
It's cheap, it looks good, it serves a practical purpose, what's not to like? 👍
Kaotic LazagnaThread starterCentral Valley, CA · Feb 19, 2007#25
Originally Posted by yrsdrgn ↑
oops haha i meant the top area under the toyota emblem
lol...okay. hmmm yeah, i think it would look better if i were to replace the upper grill as well, but wouldn't you have to remove the entire front bumper to gain access to it?
Kaotic LazagnaThread starterCentral Valley, CA · Feb 19, 2007#26
Originally Posted by nevermorez ↑
That looks a lot better! Nice Job.
thanks for the compliment.
Kaotic LazagnaThread starterCentral Valley, CA · Feb 19, 2007#27
Originally Posted by eTiMaGo ↑
It's cheap, it looks good, it serves a practical purpose, what's not to like? 👍
exactly. heh. i really don't want to lose my A/C again over some stupid rock hitting the condenser.
Sway84Toronto Ontario Canada · May 20, 2007#28
arent there smaller threads of mesh that you can apply that will help to make sure that little pebbles wont hit ure condenser?... i would like a DIY on this project, cool mod definately
Kaotic LazagnaThread starterCentral Valley, CA · May 21, 2007#29
Originally Posted by Sway84 ↑
arent there smaller threads of mesh that you can apply that will help to make sure that little pebbles wont hit ure condenser?... i would like a DIY on this project, cool mod definately
wow brought back from the dead. yeah, i'm pretty sure there are patterns that have smaller diamonds, squares, etc. but i didn't want to restrict the air flow going to the radiator and condenser.

i tried to do a DIY, but the pics weren't working out.

here's the steps (minus the pics)

1. flatten out grill as much as possible (if it came rolled).
2. find a way to "stick" the grill in the location where you want it to be - i used zip-ties and some what tied it down a little.
3. with a sharpie, trace the inlet/grill parameter (trace a little beyond the borders). *make sure when your tracing, do it as straight as possible and make sure the grill itself does not move.
4. take off the grill.
5. cut a little within the traced border
6. zip-tie or find another way to mount the grill in place - i used several zip-ties to tie the grill down.
7. enjoy a new look and added protection.

it works great. even the plastic one i bought holds up to rocks and pebbles kicked up on the freeway (can't say the same for my paint on the hood).
Sway84Toronto Ontario Canada · May 21, 2007#30
yea i hate those damn pebbles lol... my hood :S... thats one of the reasons im affraid of getting a front bumper.... ps...u already have the bottom grill on, why not do the same for the under emblem one too?...
Kaotic LazagnaThread starterCentral Valley, CA · May 21, 2007#31
i like the honey-comb grill already on it. heh. i'm waiting for some one to make a nice looking grill (upper), like the "Civic Type R" grills on eBay. hehe.
KatanaUnder the hood! · May 26, 2007#32
Anyone knows how to change the upper grille?
redyarisOrlando, FL · May 27, 2007#33
The upper grill is pretty crappily held on by plastic tabs. Be careful when you try to remove it cuz those things will snap if you look at them wrong.
OxyG3nEMontreal , Quebec , Canada · May 27, 2007#34
i saw someone here that did this :

Picture not included in this copy
Kaotic LazagnaThread starterCentral Valley, CA · May 28, 2007#35
one of the members here did their own top grill on a LB.
Yaris OmegaThe Ark "Wake Me When You Need Me" · May 29, 2007#36
cool grill
ecoAtlanta · May 29, 2007#37
Another one rises from the grave,I beleive that last pic is photochop.
Sway84Toronto Ontario Canada · May 29, 2007#38
this is my next project with LED neons on the inside.... im just affraid of the heat that will melt them lol...
Kaotic LazagnaThread starterCentral Valley, CA · May 30, 2007#39
Originally Posted by eco ↑
Another one rises from the grave,I beleive that last pic is photochop.
lol...yeah, i haven't seen this thread for a while. surprised someone brought it back.
Kaotic LazagnaThread starterCentral Valley, CA · May 30, 2007#40
Originally Posted by Sway84 ↑
this is my next project with LED neons on the inside.... im just affraid of the heat that will melt them lol...
if they're plastic, i say forget about the neons. if they're metal, then sure, why not.
Sway84Toronto Ontario Canada · May 30, 2007#41
are you talking about the neons? or the grill mesh?
Kaotic LazagnaThread starterCentral Valley, CA · May 30, 2007#42
oops, i was talking about the grill. if they're made of plastic, you might melt them with the neons. sorry for the confusion.
Sway84Toronto Ontario Canada · May 30, 2007#43
im gonna go and get the mesh soon and we will see what i can do
Kaotic LazagnaThread starterCentral Valley, CA · May 30, 2007#44
cool. post some pics, or ask me questions if you have any.
Black YarisToledo, OH · May 30, 2007#45
Originally Posted by Sway84 ↑
this is my next project with LED neons on the inside.... im just affraid of the heat that will melt them lol...
LED's or Neon's?

LED's don't get hot, Halogens and neons do, but not LEDs
Sway84Toronto Ontario Canada · May 30, 2007#46
LED Blues...either from streetglow to match a set of underbodys i wanna get
Kaotic LazagnaThread starterCentral Valley, CA · Jun 2, 2007#47
Originally Posted by Black Yaris ↑
LED's or Neon's?

LED's don't get hot, Halogens and neons do, but not LEDs
yeah, the HiLEDs dome light i installed in my gf's car doesn't get anywhere near hot, unlike the OEM bulb.
Kaotic LazagnaThread starterCentral Valley, CA · Jun 2, 2007#48
Originally Posted by Sway84 ↑
LED Blues...either from streetglow to match a set of underbodys i wanna get
personally i don't like "neons", but it's your car and you have every right to mod it how you want to. enjoy it. and when you do get those LED's post some pics, i want to see how it turns out 👍
Sway84Toronto Ontario Canada · Jun 2, 2007#49
doesn anyone know how to take off the emblem grill area?
Kaotic LazagnaThread starterCentral Valley, CA · Jun 3, 2007#50
again, one of the members did here, can't remember who tho.