Yarisworld Archive

adding an Amp

6 posts · 4,418 views

KeymasterOriginal postSweden · Feb 15, 2007#1
Well i'd like to add an amp in stock headunit can i take the signal from the rear speakers from the back of the headunit (strip the cables and adding an LOC there) and from there to the amp? or i have to strip the cables near to the speakers and connect from there the LOC (low output converter)?

Replies 5

KittPanama City, Panama · Feb 15, 2007#2
IMHO I won't recommend doing it on the stock unit... get an after marked one with pre-amp out... just my 2 cents...
KeymasterThread starterSweden · Feb 16, 2007#3
And if i do this in the head unit can this that i'm telling going to work???
spkrman2 · Feb 16, 2007#4
its the same signal behind the head unit as at the speakers.

Go with behind the head unit, it'll make your life alot easier.
slvryarisIndiana · Feb 16, 2007#5
You can also splice into the rear deck speakers since the amp is right there if thats were you are going to mount it. U can save alot of money on RCA's and you also have room to tinker with it. I always liked to put it in the rear, but the choices of were to install are limitless.



Originally Posted by Keymaster ↑
Well i'd like to add an amp in stock headunit can i take the signal from the rear speakers from the back of the headunit (strip the cables and adding an LOC there) and from there to the amp? or i have to strip the cables near to the speakers and connect from there the LOC (low output converter)?
KeymasterThread starterSweden · Feb 16, 2007#6
Thank's a lot for your answers!!