ChinoCharlesOriginal postOH · Feb 5, 2007#1Monday, February 5th, 2007
As many of you know, there is a reputable aftermarket company that is considering packaging a short shifter for the Yaris.
If the short shifter is given the green light, they will also order a pair of stock shifter bushings from Toyota and create stainless steel bushings to be offered with the short shifter as a package deal... everything you'll need for shorter, more precise shifts in one package, from one great company!
I will continue to keep you guys updated. No guarantees... no promises... but so far, so good.
Replies 38
Doc ZaiusOttawa, ON, Canada · Feb 5, 2007#2What exactly to bushings do?
ChinoCharlesThread starterOH · Feb 5, 2007#3I've never had steel bushings so I can't say for sure... I've heard that they're the best under-50-dollar mod you can make to a manual car though. I do know that nobody makes them for the Yaris yet... or at least I haven't seen any.
TWM makes bushings for the cage, but not for the linkage in the engine bay.
ChinoCharlesThread starterOH · Feb 5, 2007#4Thanks man, I'm hoping they'll follow through. So far it looks pretty damn good.
largeorangefontSo Cal, OC · Feb 6, 2007#5 Originally Posted by
Doc Zaius ↑ What exactly to bushings do?
The bushings mount the shifter mechanism to the vehicle. If it was directly bolted, you would feel every drivetrain vibration and noise right through the shifter.
OEMs use rubber bushings to isolate this noise and vibration from coming into the car through the shifter.
Stiffer bushings take slop out of the shift linkage. Steel bushings may increase noise a bit, and you will feel more vibration through the shifter. Shifting should feel more positive, with less slop. Alot of times urethane or delrin is used for this purpose instead of steel to decrease noise.
ChinoCharlesThread starterOH · Feb 6, 2007#6Thanks Ashley... you're quite the wealth of information. 😁
YarisGuyUSA · Feb 7, 2007#7Very good news. And if you are talking about shifter bushings on the tranny side then put me down for some. I have used them in other cars and they make a very nice difference. One of the best mods for the money 😁
evilreignTX · Feb 7, 2007#8Damn, I've been lookin for a cheaper alternative to the $$$$ TRD one. Really lookin forward to seeing some more details on this when it comes out.
ChinoCharlesThread starterOH · Feb 8, 2007#9Yeah, we're talking about the bushings on the tranny side. The stockies suck. I was bouncing mine off the kitchen floor the other day.
ChinoCharlesThread starterOH · Feb 21, 2007#10Wednesday, February 21, 2007
It may be a while before we see an alternative. Stay tuned.
eTiMaGoBangkok, Thailand · Feb 22, 2007#11my thoughts exactly 😁
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Feb 22, 2007#12 Originally Posted by
ChinoCharles ↑ Wednesday, February 21, 2007
It may be a while before we see an alternative. Stay tuned.
NOT TRUE, i ordered mine and got it next day.... TOYOTA HAS ALMOST 200 OF THESE IN THE COUNTRY RIGHT NOW.......
ChinoCharlesThread starterOH · Feb 22, 2007#13Oh shiz, they're on to me... 😆
Time to ruffle some feathers...
ChinoCharlesThread starterOH · Mar 19, 2007#14Monday, March 19th, 2007
Finally some good news! We should know whether or not the aforementioned "reputable shop" plans to produce a transmission-side Yaris short shifter piece very soon. The bushings should be pretty much in the bag, as they are much easier to produce. I'll continue to keep you all updated. Looks like good things may come to those who wait after all!
Black YarisToledo, OH · Mar 19, 2007#15Sweet keep us updated with a $ amount as soon as ya find out
ChinoCharlesThread starterOH · Mar 19, 2007#16You know it.
MooseCumming, GA · Mar 20, 2007#17Although I'm all about the aftermarket short-shifter, I'm not too enthuised about the whole stainless-steel-bushings-thing. I would much rather see a nice urethane set from Energy Suspension. I can imagine, since the steel bushings have NO play, that there could be negative side effects from using them. You should have a little play in the shifter- the rubber bushings, besides just insulating noise and vibration, keep you, the idiot human, from bending your shift forks and linkages when your shift angle is just a little off.
Just a thought.
jdubau55Blacksburg, VA · Mar 20, 2007#18AKA Delrin Not sure of the stock bushing OD but .875" OD x 4' is only like 13 bux.
largeorangefontSo Cal, OC · Mar 20, 2007#19 Originally Posted by
Moose ↑ Although I'm all about the aftermarket short-shifter, I'm not too enthuised about the whole stainless-steel-bushings-thing. I would much rather see a nice urethane set from Energy Suspension. I can imagine, since the steel bushings have NO play, that there could be negative side effects from using them. You should have a little play in the shifter- the rubber bushings, besides just insulating noise and vibration, keep you, the idiot human, from bending your shift forks and linkages when your shift angle is just a little off.
Just a thought.
I agree. I really doubt they would actually make them out of steel though.
eTiMaGoBangkok, Thailand · Mar 20, 2007#20 Originally Posted by
Moose ↑ Although I'm all about the aftermarket short-shifter, I'm not too enthuised about the whole stainless-steel-bushings-thing. I would much rather see a nice urethane set from Energy Suspension. I can imagine, since the steel bushings have NO play, that there could be negative side effects from using them. You should have a little play in the shifter- the rubber bushings, besides just insulating noise and vibration, keep you, the idiot human, from bending your shift forks and linkages when your shift angle is just a little off.
Just a thought.
I'm not so sure it's a big concern with this car, if you look at the way the shifter system is assembled, the only connection between the shifter and the gearbox itself are two rods that go only backward and forward, there should not be any need for any play since there's no way to really mess up your shift.
TWM also has some aluminium replacement bushings.
ChinoCharlesThread starterOH · Mar 20, 2007#21 TWM also has some aluminium replacement bushings.
TWM's bushings are for the cage. They are not for the tranny-side linkage. This is why I am so excited that these may be produced. It is uncharted territory, and that we don't want.
With stainless steel bushings, there is no play, so there are drawbacks. You will feel the road through your shifter. Some will say that for a daily driver it is pointless or annoying, but I personally like as much input from my car as possible. It helps you make decisions. The electronic power steering is already robbing you of that effect to a degree. Control is increased, but as Moose mentioned it comes at the price of risking long-term damage. If you're not an experienced stick driver, you may want to wait until you're good and comfortable before moving to steel bushings. If this isn't your first date with a clutch, however, you'll probably enjoy the sensation of actually feeling yourself sinking into gear.
eTiMaGoBangkok, Thailand · Mar 21, 2007#22aaaah i see, my bad there 😁
most interesting, then....
ChinoCharlesThread starterOH · Apr 10, 2007#23OK. This is it folks. Cat is out of the bag... I hope I don't get yelled at for posting this, but it can now be found through the main web site, so I don't think I am sworn to secrecy anymore.
http://www.nonstoptuning.com/ProductsDrivetrain.htm 'Nuff said. NST FTW!!!
NutzoidsPhiladelphia · Apr 10, 2007#24 Originally Posted by
ChinoCharles ↑ OK. This is it folks. Cat is out of the bag... I hope I don't get yelled at for posting this, but it can now be found through the main web site, so I don't think I am sworn to secrecy anymore.
http://www.nonstoptuning.com/ProductsDrivetrain.htm 'Nuff said. NST FTW!!!
The Million Dollar Question is still on the Table...
WILL IT WORK WITH TWM's KIT?
😈
ChinoCharlesThread starterOH · Apr 10, 2007#25IT WILL! Your throws would be so short its insane!
The Two Million Dollar Question then...
When is it "too short?"
NutzoidsPhiladelphia · Apr 10, 2007#26 Originally Posted by
ChinoCharles ↑ IT WILL! Your throws would be so short its insane!
The Two Million Dollar Question then...
When is it "too short?"
When your girlfriend says...
"It's OK dear... I was sleepy anyway!"
😈
ChinoCharlesThread starterOH · Apr 10, 2007#27Oh jeez... 😆
Black YarisToledo, OH · Apr 10, 2007#28what about the "TRD style" short throw, with our modified shifters? how short do you think those will be?
ChinoCharlesThread starterOH · Apr 10, 2007#29I have a modified shifter and I'll likely be testing this new short shifter (which is tranny side) so I will let you guys know just how short it is.
eTiMaGoBangkok, Thailand · Apr 10, 2007#30my only concern, after installing the TWM one, is that if it is combined with the TRD/CC shifter, it's going to be much too hard to push the lever into gear, there's already a lot of resistance.
But, wait and see 🙂
acrbillchicago · Apr 10, 2007#31Are you saying that the NST short shifter is on the tranny side?
Back in my Neon days we used to have a mod where we moved the pivot point on the gear selector arm in about an inch. That eventually evolved into someone making a new arm. I did that mod along with a true short shifter and holy crap where the shifts short. I think it was 2.5" total forward back motion.
I will however say this. I had urethane bushings on the shift cables and they made shifting quickly difficult. I ended up putting the stock bushings back on the shifter side and leaving the aftermarkets on the tranny side and that helped a ton.
A short shifter is a mod you can enjoy dozens of times a day.
ChinoCharlesThread starterOH · Apr 11, 2007#32It is tranny side. I think if bushings were made they'd be stainless steel.
YarisGuyUSA · Apr 11, 2007#33 Originally Posted by
acrbill ↑
A short shifter is a mod you can enjoy dozens of times a day.
If not more
barebonedvitzsacramento,CA · Apr 13, 2007#34ey charles, any update on the shifter combo? thanx man!
graywolf_14Wichita ks · Apr 15, 2007#35ok as in tranny side u mean it is just bushings on the tranny? Ok and when u get the trd shifter and is installed is there something to tell people it is trd? Does it come with a shiftknob or sticker or something?
eTiMaGoBangkok, Thailand · Apr 15, 2007#36I think a sticker's included with the TRD one...
Chino, will you want any CCRD stickers? 😆
YogiYarisTampa · Apr 27, 2007#37 Originally Posted by
Moose ↑ Although I'm all about the aftermarket short-shifter, I'm not too enthuised about the whole stainless-steel-bushings-thing. I would much rather see a nice urethane set from Energy Suspension. I can imagine, since the steel bushings have NO play, that there could be negative side effects from using them. You should have a little play in the shifter- the rubber bushings, besides just insulating noise and vibration, keep you, the idiot human, from bending your shift forks and linkages when your shift angle is just a little off.
Just a thought.
This is true I have an Eagle Talon TSI AWD and I put the aftermarket bushings made for my car in. It is a good feeling and rids the slop but I slammed my shifter into gear at the wrong angle and had to buy all new shift linkage. Oh yeah it happened at the race track too which really sucked.
Black YarisToledo, OH · Apr 27, 2007#38Any new updates on the part?
tk-421Dagobah · May 23, 2007#39 Originally Posted by
Black Yaris ↑ Any new updates on the part?
Picture not included in this copy