ok frist of all i have a 07 yaris sedan so its not the racer that every one has but i personally like the looks better than the Hatch. but anyways i was looking into doing a swap from the original 1nz-fe to a celica's 2ZZ-GE i was wondering if any one had anyinfo specifically looking for engine dimensions and what type of ecu and tranny to look for i was thinking some out of the corola would work but i dont know ( thats why im asking) im not a complete moron but i am kinda lost any help would be appreciated. (i can rewire a Whole car so thats not a problem)
Yaris Engine Swaps!!!
78 posts · 60,190 views · page 1 of 2
Replies 77
there has been talking on this... nobody on this forum has done it yet. Lots of "plans" and lots of "eventually" (including myself? lol)... but its january of 07, and the car is an 07... give it till 08/09 when those warrantees start wear out, used yaris being available for half of what they are now, and the mod community will grow tenfold.Originally Posted by Duckywitbigfeetz ↑ok frist of all i have a 07 yaris sedan so its not the racer that every one has but i personally like the looks better than the Hatch. but anyways i was looking into doing a swap from the original 1nz-fe to a celica's 2ZZ-GE i was wondering if any one had anyinfo specifically looking for engine dimensions and what type of ecu and tranny to look for i was thinking some out of the corola would work but i dont know ( thats why im asking) im not a complete moron but i am kinda lost any help would be appreciated. (i can rewire a Whole car so thats not a problem)
The platform has tons of potential, and... its not a honda! 🤘
But, to be of more help (or maybe not, lol)... there is no book with a partslist and lots of nifty pics on how to swap any motor into the yaris, at least it hasnt been found yet. If you really want to do it, do the legwork yourself... write the book, and gain tons of respect from the community :)
Search and you shall find! Just let us know what you find so it can benefit everyone 🤘
A good place to start @ the tranny... not sure how much help it is in the long run but: Auto to manual
It's possible, TRD Thailand can do it here for about US$3000, but it's an engine swap only, not the gearbox... Engine would be a refurbished 2ZZ-GE
They say it would take about 3 months in total to order the engine, modify the engine bay, and get everything running.
I'm quite sure I will eventually do this to my car, in a year or two, but I want to explore forced induction on the stock engine first.
They say it would take about 3 months in total to order the engine, modify the engine bay, and get everything running.
I'm quite sure I will eventually do this to my car, in a year or two, but I want to explore forced induction on the stock engine first.
i think there was an aftermarket company that swapped 1NZ-FE for the 2ZZ-GE on their show car.
Oh it's certainly already been done, I am sure there are hundreds running around in Japan... But how can we access all that information?? 😁
ask these guys:Originally Posted by eTiMaGo ↑Oh it's certainly already been done, I am sure there are hundreds running around in Japan... But how can we access all that information?? 😁
Picture not included in this copy
lol...MXC. hilarious show.
I love the looks of the new oscar jackson super charger. Its for the fit now but if we can bug him to death maybe they will develp one for the yaris. Its not the typical old desing he used to have. Its much more efficent now, looks like a turbo and now oil lines to run or pans to tap. BLitz kit looks to be to much money for my pockets.
HAHAHAhahahhahha!!! 🤣 nice one!! 😁Originally Posted by spkrman ↑ask these guys:
Yeah I saw an ad in a magazine for a supercharger that looked a lot like a turbo turbine... are those any good?Originally Posted by magoo_lc1 ↑I love the looks of the new oscar jackson super charger. Its for the fit now but if we can bug him to death maybe they will develp one for the yaris. Its not the typical old desing he used to have. Its much more efficent now, looks like a turbo and now oil lines to run or pans to tap. BLitz kit looks to be to much money for my pockets.
mmmmmm... pretty! 🤤
nice... Look sso much more modular than a standard supercharger... Doesn't look like it would take much to adapt to a yaris...
you need to see the compressor map for that given unit to know how well it compares to the other superchargers on the market.Originally Posted by eTiMaGo ↑Yeah I saw an ad in a magazine for a supercharger that looked a lot like a turbo turbine... are those any good?
and it looked like the compressor not the turbine.
Oops wrong choice of words there 😆Originally Posted by Russelt3hPirate ↑you need to see the compressor map for that given unit to know how well it compares to the other superchargers on the market.
and it looked like the compressor not the turbine.
They have three different sizes available, this is for the mid-sized one:
http://www.rotrex.com/pdfs/Rotrex_Te...Range_V1.6.pdf
and for the small-size one:
http://www.rotrex.com/pdfs/Rotrex_Te...ange_V_3.5.pdf
Both of them should be applicable to our engines, according to their ratings. There's a lot more info at www.rotrex.com, if someone more knowledgeable then myself can take a look and share their opinion 😉
Could we not use an aftermarket accessory pulley for a Scion (for example), which has the extra space for the power steering belt (which the Yaris does not use), and run it off that? If not, it should not cost all that much to get a custom pulley done, seeing what's available out there...Originally Posted by cdydjded ↑I spoke to Oscar @ PRI & to the rep for Rotrex, its not going to happen unless all the pulleys are changed. Here the problem, the Yaris has 3 groove pulleys. The Rotrex need minimal 5 grooves. I had the brackets done before I spoke to the Rotrex rep. It fits without a problem. Just that changing the pulleys would make the kit expensive.
Jackson has been supercharging Honduhs forever.
does anyone know if the 1nzfe out of an 04 scion xb would work in a yaris?
erm probably, but why would you want to swap for the same engine?
I am looking at buying one and rebuilding the top end. forged titanium rods, forged aluminum pistons, bore it out to 76mm (1.6L), and new head gasket to change the compression to 8.5:1. This way It will be able to handle forced induction reliably and have a little bit more displacement.
Sounds like an awesome project!!! But I'm not sure if its quite the same engine. I remember hearing something about 2 belts, whereas we have just one...? There are more qualified people than me to answer this.
$1000usd for rods, pistons, head gasket, and all hardware.
and $650 for a use engine. (if I can find one that works.)
No power steering belt on the Yaris. Its electric... boogie woogie woogie.
yeah but that should just be a matter of swapping a couple of pulleys 🙂Originally Posted by ChinoCharles ↑No power steering belt on the Yaris. Its electric... boogie woogie woogie.
I was just stating the reason for the extra pulley on the Scions... I don't know shit about engine swaps! 😁 If you need a steak grilled or a computer built, call me though.
what is your ebay username, pm me :)Originally Posted by cdydjded ↑yaristoon: sorry but you will spend $1000 on the rods alone. I sell JE pistons on eBay & I sell them for $485.00. Even Eagle rods which are the cheapest on the market cost $325.00. I think you meant billet steel rods.
Ya. Woah... thats pretty damn cheap! If you've actually found such a deal, lemme in on it, ok!! 😁Originally Posted by yarisTOONR82 ↑$1000usd for rods, pistons, head gasket, and all hardware.
Hahahhahaha... awesome... I'm eating steak while setting up a dual-boot Win98/Win2k POS laptop. 👍Originally Posted by ChinoCharles ↑I was just stating the reason for the extra pulley on the Scions... I don't know shit about engine swaps! 😁 If you need a steak grilled or a computer built, call me though.
Cow-munching nerds unite!
#17
Toyota 16V DOHC 2000-04
Engine
Code Stock
Bore Includes: Engine Kit #/Price
1NZFE 75mm Complete Gasket Set
Performance MLS Head Gasket
ROSS/Wiseco Forged Pistons
(75, 75.5, 76mm) and
(8.5, 9.0, 9.5, 10.0 comp ratio)
Plasma Moly Rings
TOGA HP Main Bearings
TOGA HP Rod Bearings
Thrust Washers EKTO41MPX
$969
Call to Order:
(603) 378-0090
Toyota 16V DOHC 2000-04
Engine
Code Stock
Bore Includes: Engine Kit #/Price
1NZFE 75mm Complete Gasket Set
Performance MLS Head Gasket
ROSS/Wiseco Forged Pistons
(75, 75.5, 76mm) and
(8.5, 9.0, 9.5, 10.0 comp ratio)
Plasma Moly Rings
TOGA HP Main Bearings
TOGA HP Rod Bearings
Thrust Washers EKTO41MPX
$969
Call to Order:
(603) 378-0090
there is an upcharge for materials cost on titanium.
oooooooooooooooooooooooooooooooooh!!! 😁
Making a 2zz-ge fit into a Yaris is no easy task, you will need:
1.) An extreme amount of talent and time
or...
2.) A TON of money and a quality shop.
Once you figure out the wiring, engine mounts, CV/lug conversion, and all the firewall modification to make it fit its a matter of making it pass emissions. For those living in a non-testing county this is easy.
If you want to receive a BAR sticker for 49 state emission legality the engine/ecu must have the following:
*Be at least the same year or newer than the chassis (thus limiting your 2zz-ge choices)
*Maintain all factory emission equipment from that powertrain (no hacking cats/stand-alones/etc)
Its true, you could drum up a nasty supercharger system and piggyback computer and tweak it to run clean enough to pass most emission tests (no check engine lights). For the price of a 2zz-ge swap you could either rebuild the engine with titanium components and reinforce the block or just keep throwing in stock 1nz's at $300 + labor per shot.
This way you could also revert it back to stock if you had to sell it w/o trying to explain your Franken-Yaris to a confused buyer.
If your dedicated enough to swap the 2zz I would just cherish every minute with the car and figure a way to register it in the boonies. Its a much easier way for most people to get new license tabs.
PS: The 1zz-fe and the 2zz-ge are equal in difficulty to swap while the only advantage the 1zz has is its price and availability. Performance per buck is nowhere near the 2zz.
1.) An extreme amount of talent and time
or...
2.) A TON of money and a quality shop.
Once you figure out the wiring, engine mounts, CV/lug conversion, and all the firewall modification to make it fit its a matter of making it pass emissions. For those living in a non-testing county this is easy.
If you want to receive a BAR sticker for 49 state emission legality the engine/ecu must have the following:
*Be at least the same year or newer than the chassis (thus limiting your 2zz-ge choices)
*Maintain all factory emission equipment from that powertrain (no hacking cats/stand-alones/etc)
Its true, you could drum up a nasty supercharger system and piggyback computer and tweak it to run clean enough to pass most emission tests (no check engine lights). For the price of a 2zz-ge swap you could either rebuild the engine with titanium components and reinforce the block or just keep throwing in stock 1nz's at $300 + labor per shot.
This way you could also revert it back to stock if you had to sell it w/o trying to explain your Franken-Yaris to a confused buyer.
If your dedicated enough to swap the 2zz I would just cherish every minute with the car and figure a way to register it in the boonies. Its a much easier way for most people to get new license tabs.
PS: The 1zz-fe and the 2zz-ge are equal in difficulty to swap while the only advantage the 1zz has is its price and availability. Performance per buck is nowhere near the 2zz.
why go through the trouble to switch engines, the day that there is a sick turbo that comes out for our car your gonna regret waisting all that money bcuz once there is a sick turbo kit out you can build off of that turbo kit and try to get maximum power out of that, if not just sell your car and invest the money you were gonna on a engine swap on a new or used suby or in that class of car..i plan on having the yaris only for about 3-4 years bcuz i want a way faster car bcuz im to young and dont go the flow but soon ill be making bucks to pay off my car and buy a new one
why go through the trouble to switch engines...waisting all that money bcuz ... sick turbo kit ... maximum power... bcuz ...bcuz im to young and dont go the flow but soon ill be making bucks to pay off my car and buy a new onehuh?
Well for the price of any swap you can not only get a "kit" but a full blown custom system. This means your building your car for a purpose not building it per a kit's intent...huge difference.Originally Posted by elsteverino889 ↑why go through the trouble to switch engines, the day that there is a sick turbo that comes out for our car your gonna regret waisting all that money bcuz once there is a sick turbo kit out you can build off of that turbo kit and try to get maximum power out of that, if not just sell your car and invest the money you were gonna on a engine swap on a new or used suby or in that class of car..i plan on having the yaris only for about 3-4 years bcuz i want a way faster car bcuz im to young and dont go the flow but soon ill be making bucks to pay off my car and buy a new one
Sure though, sell the Yaris and get a used WRX. Then you will realize that every gear grinds and half the teeth off your pinion shaft reside on the bottom of the trans. Believe me, an ex suby guy...the only performance Suby with a decent trans to hit the USA is the STI. 👍
There is always someone faster out there. Buy a car you like and be happy with it. Otherwise the one day you sell the Yaris to get a Suby you will run into someone with a fully built Supra, Corvette, 911 GT2, etc and you will feel like its all been a wasted effort.
Not trying to knock the dream...just trying to keep it all in perspective. We have all been there once.
K20Z1 FTW.
the motor you guys have in your yaris just doesnt have the capabilities to produce the power you want, dont waste too much on the 1.5
I doubt anyone can push over 185 hp with a good amount of boost
if your looking into a 2zz swap, im sure its not going to be too difficult
you can buy a used 2zz from a toyota matrix, celica gts, or vibe gt
they come pretty cheap, the one i bought for the mr2 cost me 450
im looking into if our c50 trans will work with the 2zz motor, if people can post some pics of the c50 trans then this will help
as for engine management, you can run a hydra stand alone for the 2zz
if you want to run close to stock, you can swap the yaris computer for a celica gts computer if thats possible, i know they do it on the mr2's with a special wiring setup someone designed from the spyder forums
a similar setup can be made
if anyone is serious about doing this swap, i believe it is very possible and a little bit more research has to be done
with a built 2zz and boost, you can push over 350 fwhp, think about it?
I doubt anyone can push over 185 hp with a good amount of boost
if your looking into a 2zz swap, im sure its not going to be too difficult
you can buy a used 2zz from a toyota matrix, celica gts, or vibe gt
they come pretty cheap, the one i bought for the mr2 cost me 450
im looking into if our c50 trans will work with the 2zz motor, if people can post some pics of the c50 trans then this will help
as for engine management, you can run a hydra stand alone for the 2zz
if you want to run close to stock, you can swap the yaris computer for a celica gts computer if thats possible, i know they do it on the mr2's with a special wiring setup someone designed from the spyder forums
a similar setup can be made
if anyone is serious about doing this swap, i believe it is very possible and a little bit more research has to be done
with a built 2zz and boost, you can push over 350 fwhp, think about it?
turbo'ed 2ZZ in a Yaris... I wonder if there'll be enough space under the hood to fit all that! And you better have brakes and suspension to follow, not to mention a good LSD, with that much power to the front wheels 😆
anything is possible my friend
and you have plenty of room under that hood
and an lsd shouldnt be much of a problem to install
but definately some upgraded axles
and you have plenty of room under that hood
and an lsd shouldnt be much of a problem to install
but definately some upgraded axles
A stock 1nz-fe can only see so much boost and power before things start breaking, it was never designed to. Being an FE style engine the rods, pistons, and pretty much everything else was designed entirely for economical reasons. A BUILT 1nz as any engine can take much more punishment and with the right fuel/engine management and head/cam work it can produce serious power.Originally Posted by Snake ↑the motor you guys have in your yaris just doesnt have the capabilities to produce the power you want, dont waste too much on the 1.5
I doubt anyone can push over 185 hp with a good amount of boost
if your looking into a 2zz swap, im sure its not going to be too difficult
you can buy a used 2zz from a toyota matrix, celica gts, or vibe gt
they come pretty cheap, the one i bought for the mr2 cost me 450
im looking into if our c50 trans will work with the 2zz motor, if people can post some pics of the c50 trans then this will help
as for engine management, you can run a hydra stand alone for the 2zz
if you want to run close to stock, you can swap the yaris computer for a celica gts computer if thats possible, i know they do it on the mr2's with a special wiring setup someone designed from the spyder forums
a similar setup can be made
if anyone is serious about doing this swap, i believe it is very possible and a little bit more research has to be done
with a built 2zz and boost, you can push over 350 fwhp, think about it?
The difference is that the Matrix, Celica, and MR2 all share the 1zz-fe standard engine. The Matrix XRS, Celica GT-S, and Corolla XRS had the 2zz has a standard feature. This fact means the motor mounts, transmission linkages, etc are similar enough to justify simple changes during the assembly line. The Yaris, X series of Scion, Echo, etc never had anything available except 1nz and some 1.0/1.3 options in other places of the world.
The Celica ECU or any 2zz ecu will work with a swap as long as your able to wire up the main functions from one harness to another. This of course takes some wiring ability and perhaps the discipline to not fixing every last wire (ex: not getting all accessories to work).
The real problem is getting the mounts to line up, getting the linkage right, wiring done, exhaust system plumbed, powersteering to work, ac system to link up, etc. The ABS and restraint systems will be nearly impossible.
A 2zz is definitely possible and has been done. However, these are not Honda engine swaps that two high school kids do over a weekend and a few beers. They even make kits for those guys.
I think the Yaris crowd needs a little bit more power and more work on suspension and weight loss. You can only put down so much power with fwd and we dont have factory fender flairs. Stock SRT-4's have a chore putting down 230 at the wheels in stock trim. Much past this the game just gets silly. Sure slicks and straight lines (60mph+ as the kids do these days) are one thing but turn the wheel and try leaving an apex and your going to get walked on at some point to a rwd or awd car.
While its a fun idea to make a wild flame-spitting tire smoking Yaris but its probably not the most practical. Any Yaris that can corner flat and put down 15-16 second quarter mile times is a blisteringly fast car on any track. Remember a Cooper S only do low to high 15's stock.
Fuck it, who want to see a Chevy 350 in a Yaris!!!
While its a fun idea to make a wild flame-spitting tire smoking Yaris but its probably not the most practical. Any Yaris that can corner flat and put down 15-16 second quarter mile times is a blisteringly fast car on any track. Remember a Cooper S only do low to high 15's stock.This pretty much sums up my view on anything performance-related with this car.
Very good insight... Personally I would not want to see more than 200 hp on my car, more than that would basically go to waste, I'm not gonna go drag racing 😛
Originally Posted by FlintArrow ↑A stock 1nz-fe can only see so much boost and power before things start breaking, it was never designed to. Being an FE style engine the rods, pistons, and pretty much everything else was designed entirely for economical reasons. A BUILT 1nz as any engine can take much more punishment and with the right fuel/engine management and head/cam work it can produce serious power.
The difference is that the Matrix, Celica, and MR2 all share the 1zz-fe standard engine. The Matrix XRS, Celica GT-S, and Corolla XRS had the 2zz has a standard feature. This fact means the motor mounts, transmission linkages, etc are similar enough to justify simple changes during the assembly line. The Yaris, X series of Scion, Echo, etc never had anything available except 1nz and some 1.0/1.3 options in other places of the world.
The Celica ECU or any 2zz ecu will work with a swap as long as your able to wire up the main functions from one harness to another. This of course takes some wiring ability and perhaps the discipline to not fixing every last wire (ex: not getting all accessories to work).
The real problem is getting the mounts to line up, getting the linkage right, wiring done, exhaust system plumbed, powersteering to work, ac system to link up, etc. The ABS and restraint systems will be nearly impossible.
A 2zz is definitely possible and has been done. However, these are not Honda engine swaps that two high school kids do over a weekend and a few beers. They even make kits for those guys.
I think the Yaris crowd needs a little bit more power and more work on suspension and weight loss. You can only put down so much power with fwd and we dont have factory fender flairs. Stock SRT-4's have a chore putting down 230 at the wheels in stock trim. Much past this the game just gets silly. Sure slicks and straight lines (60mph+ as the kids do these days) are one thing but turn the wheel and try leaving an apex and your going to get walked on at some point to a rwd or awd car.
While its a fun idea to make a wild flame-spitting tire smoking Yaris but its probably not the most practical. Any Yaris that can corner flat and put down 15-16 second quarter mile times is a blisteringly fast car on any track. Remember a Cooper S only do low to high 15's stock.
not a bad post only thing i disagree with is this "You can only put down so much power with fwd and we dont have factory fender flairs. Stock SRT-4's have a chore putting down 230 at the wheels in stock trim."
dont know about this considering my SRT puts down over 600 fwhp, so I kind of disagree with this one.
Ive seen front wheel drive cars put down close to 1000 fwhp...
For an SRT-4 to put down 300fwhp, you only need $1500 in aftermarket mods on the motor, so its not that difficult.
If you manage to get 200 horse out of any motor at the wheels on the yaris with a good amount of weight reduction, your talking a low 13 sec hatchback thats not too bad
Yes, but what he was explaining is that it's only really good for straight line speed. If you're looking to have it go round a track, or even just daily driving that much horsepower can seriously negatively affect your handling with front wheel drive, unless you have a real feather foot.Originally Posted by Snake ↑not a bad post only thing i disagree with is this "You can only put down so much power with fwd and we dont have factory fender flairs. Stock SRT-4's have a chore putting down 230 at the wheels in stock trim."
dont know about this considering my SRT puts down over 600 fwhp, so I kind of disagree with this one.
Ive seen front wheel drive cars put down close to 1000 fwhp...
For an SRT-4 to put down 300fwhp, you only need $1500 in aftermarket mods on the motor, so its not that difficult.
If you manage to get 200 horse out of any motor at the wheels on the yaris with a good amount of weight reduction, your talking a low 13 sec hatchback thats not too bad
I definitely agree with your response; it was a misunderstanding.Originally Posted by Snake ↑not a bad post only thing i disagree with is this "You can only put down so much power with fwd and we dont have factory fender flairs. Stock SRT-4's have a chore putting down 230 at the wheels in stock trim."
dont know about this considering my SRT puts down over 600 fwhp, so I kind of disagree with this one.
Ive seen front wheel drive cars put down close to 1000 fwhp...
For an SRT-4 to put down 300fwhp, you only need $1500 in aftermarket mods on the motor, so its not that difficult.
If you manage to get 200 horse out of any motor at the wheels on the yaris with a good amount of weight reduction, your talking a low 13 sec hatchback thats not too bad
I re-read my post and I didnt mean "SRT-4's have a problem producing 230 hp" but rather "traction issues arise with street tires and much more than 230 whp on various tracks."
What I really should have said is: "you can only attain so much streetable horsepower before traction issues arise; FWD and street radials lowers those limits."
I love SRT-4's. They are a blast and well designed. They punish other drivers who have spent twice as much. However, many owners go the power route because its more satisfying than making a well-balanced performance car. As you have noted making TONS of power with the 2.4T is about as easy as cooking Top Ramen in the microwave. 😈
If the Yaris had stout internals, a turbo and huge I.C., and a Quaife from the factory they would do the exact same thing. 👍
However, I bet a Yaris with 150 whp and some little R-Compounds would be a serious toy! It might only trap 90 in the quarter but your arm wouldnt be in a sling from a track day of torque steer. Lol.
PS: Sorry for officially threadjacking the topic.
I still stand that a 2zz-ge swap would be supreme if the time or money were attainable. A solid 155-160 whp in a Yaris would be extremely fun and reliable. I would use a PowerFC or similar unit to smooth the VVTL-I curve so it wouldnt be as severe.
Otherwise for 99% of the other people I would rather suggest a very mild boost situation with an insurance fund for 1nz-fe's. One per season or a mild bottom-end build with a very safe tune.
I don't understand why anyone would want to swap in a different engine. I mean sure it can be done, but I don't see a need to unless your trying to build an ultra drag specific car. The fact that you guys are missing is that the car is a light car ~2200lbs. If you swap in a different engine you run the risk of making the car heavier, because the celica engine is going to be heavier, not to mention you have to get the motor mounts just right to keep the car from being imbalanced. Personally if you make the stock engine have 200whp you would be running a 13 flat maybe even into the 12s depending on traction, I don't see why you would need a car faster then that. That being said... if you want to swap in an engine, I would do a tc engine maybe even turbo that. Reason being is the scions and the yaris seem to have similar things in common and I know its possible to cram a tc engine in an xb so why not into a yaris. But again that engine is heavier. Keep your car light and you dont need gobs of power to be fast. Plus it wuold be cool to say you have a tiny engine and your car runs 12s. Also too about the throttle body the tc's use a electric throttle body as well so it would work. Actually the guys that have my car are looking into switching throttle bodies as a possible upgrade. I will let you guys know how it turns out.
Ah, that's the beauty of car modifications.. so many choices, so many schools of thought, so many possibilities for unique results, each with its advantages and drawbacks.
Originally Posted by turboyaris ↑I don't understand why anyone would want to swap in a different engine. I mean sure it can be done, but I don't see a need to unless your trying to build an ultra drag specific car. The fact that you guys are missing is that the car is a light car ~2200lbs. If you swap in a different engine you run the risk of making the car heavier, because the celica engine is going to be heavier, not to mention you have to get the motor mounts just right to keep the car from being imbalanced. Personally if you make the stock engine have 200whp you would be running a 13 flat maybe even into the 12s depending on traction, I don't see why you would need a car faster then that. That being said... if you want to swap in an engine, I would do a tc engine maybe even turbo that. Reason being is the scions and the yaris seem to have similar things in common and I know its possible to cram a tc engine in an xb so why not into a yaris. But again that engine is heavier. Keep your car light and you dont need gobs of power to be fast. Plus it wuold be cool to say you have a tiny engine and your car runs 12s. Also too about the throttle body the tc's use a electric throttle body as well so it would work. Actually the guys that have my car are looking into switching throttle bodies as a possible upgrade. I will let you guys know how it turns out.
I agree in many ways.
There really isnt a reason to swap in another engine unless your running into a brick wall of performance and have money to burn. There are very very few motorsport events that allow for swapped engine vehicles and even less places you can pull it off from an emission stance. For those who have the money to burn a 2zz swap is the most plausible as all others would have to be basically assembled from the ground up.
I also completely agree that weight reduction is the name of the game. 15" wheels, stripped interiors with non-adjust race seats, etc is the easist way to make a car with 106 hp go faster. 18's and a bumpin system is only for commuters.
Sadly though a 2zz is within 20 pounds of a 1nz if not the exact same weight. I have read some comparisions on a Echo forum and you wouldnt imbalance the car at all...just pick up 55 whp.
Most Yaris models weight in the mid 2300 pound range. My 2000 MR-S tips the scales slightly under 2200 and it doesnt have side/curtain air bags or a back seat, trunk, etc.
If you could get 200 whp from a built/blown 1nz in a 2300 pound Yaris, more than likely you wouldnt get anything better than mid 13's which is still VERY fast. An Elise at 1950 with 160 whp runs mid 13's at 103-106 and most 2zz swapped MR2 Spyders at 2250 with 160 whp run high 13's at 103ish. I am sure there is someone out there with Hoosier slicks and no interior who will rip into the 12's but probably not the average. Point being, mid 13's from a Yaris is sickening fast.
From a spec standpoint the 2zz-ge and the 2az-fe are completely different animals. I know any TC fan will live and die by the performance potential of the 2.4 but compared to a 2zz IMO its not a fair comparison.
The 2zz out of the box puts out 10 more whp than the 2az, is much lighter and compact, has its powerband in the right place (due to VVTL-I cams), and internally has been designed for performance applications. Its heads and intake manifold are a work of art and its internals are stout with over 11:1 compression.
While it can be argued that the 2az has the potential to make more power (as its over half a liter larger), i believe at some point you will find flow and rev limitations as well as engine management problems. The extra torque would be great for drivability but depending on tire fitment could be a double-edge sword. Now, if you comparing a built 2az vs a stock 2zz then by all means it has an advantage. The nice thing about all FE style blocks (1zz, 2az, etc) is they are littered in economy cars making engine replacement very cheap. How hard is it to find a wrecked Corolla or Camry?
All Celica engine options, the 2zz and 1zz, are drive by wire operated so ECU wiring is the task at hand.
With stroker and boost options available to the smaller 1.8 engines (or even 1nz), IMO, its a much more viable performance option to putting in a 2.4. As we have noted, the Yaris is a very light rig and the need of all that torque isnt as great as say a TC cracking the scales at over 2900 pounds.
Still, I always invite a vehicle that has been done differently. Cookie-cutter mods are very boring and nobody draws a crowd these days with a B16 Honda swap if bone stock. 😉
PS: Sorry Honda fans; not trying to insult anyone. Its a great engine to swap into any car...just a bit common.
somebody buy my yaris and toss a 2zz in it lol
need to get rid of this thing, come one guys help a guy out to sell a car
need to get rid of this thing, come one guys help a guy out to sell a car