Yarisworld Archive

Progress 22mm Rear Sway Bar PRE-ORDER SPECIAL

84 posts · 33,139 views · page 1 of 2

03Z33Original postSoCal · Jan 12, 2007#1
Look for the Progress Rear Sway bar out in 8-12 weeks.

Replies 83

largeorangefontSo Cal, OC · Jan 12, 2007#2
Can we pick these up for any cheaper?
03Z33Thread starterSoCal · Jan 12, 2007#3
Originally Posted by largeorangefont ↑
Can we pick these up for any cheaper?
I'm looking into this since they have to charge CA State sales tax to local customers the price is pretty much the same, but I'll confirm and PM you.
Chris07LBNew Jersey · Jan 12, 2007#4
Nice! 👏
03Z33Thread starterSoCal · Jan 12, 2007#5
Originally Posted by Chris07LB ↑
Nice! 👏
Thanks, so are you in or are you in 🤷 😉
kngrsllSpartanburg, SC · Jan 12, 2007#6
sweet, im in.
03Z33Thread starterSoCal · Jan 13, 2007#7
Originally Posted by kngrsll ↑
sweet, im in.
Thanks! Now if we can just spread the word and get others to join in 😁
acrbillchicago · Jan 13, 2007#8
Does it include everything to complete the install like mounting tabs, links and bushings?

If so $140 is a damn steal! For the PT cruiser the install kit itself was $100.

I am definitely in for $140 but I will not send any money until I know for a fact that they will be produced and have a tentative ship date. I have seen way too many group buys go bad to risk anything.


Come one people! Lets get this done. A rear sway bar on a sway bar less car will make HUGE improvements in handling. You will thank 03z33 when you are keeping up with sports cars on the off ramps.

1. 03Z33
2. heylookitsjames
3. kngrsll
4.acrbill
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
03Z33Thread starterSoCal · Jan 13, 2007#9
This includes the mounting brackets which bolt up to the spring cups. It's a very simple install and everything needed including instructions is included.

They are running more sway bars next week, and if we get enough interest they will run these at the same time, which should allow us to see them in 4 weeks. I allowed for up to 6 weeks in case people take longer to pay. Of course all payment will be fully refundable if delivery takes longer than anticipated.
Chris07LBNew Jersey · Jan 13, 2007#10
Hummmm.... im still thinking.
03Z33Thread starterSoCal · Jan 13, 2007#11
Originally Posted by Chris07LB ↑
Hummmm.... im still thinking.
No problem 😛 Just let me know if you have any questions 👍

I know a lot of people on here have money tied up in other specials and mods.. My goal is to get my suspension dialed in first since this is what I look for the most in a car. That's why I'm pushing for this to get done. Like Bill says you won't regret going with a rear sway bar, Toyota really cheaped out by leaving the sway bar off our cars.
Chris07LBNew Jersey · Jan 13, 2007#12
👍 will do.
acrbillchicago · Jan 13, 2007#13
Are the 15 people required to get the reduced price or to see if there is enough interest to build them at all?

Does anyone know what our front sway bar options are?
ecoAtlanta · Jan 13, 2007#14
Im also thinking about gettin in on this,if it comes to a point where theres 13 people,and you need 2 more,deffinitly count me in.
ecoAtlanta · Jan 13, 2007#15
No hold on,I dont think it will fit in my signiture,count me out...........J/K.
ASHRAFHouston, TX · Jan 13, 2007#16
can I see some pics

I am thinking about it
03Z33Thread starterSoCal · Jan 14, 2007#17
Originally Posted by acrbill ↑
Are the 15 people required to get the reduced price or to see if there is enough interest to build them at all?
We need to get a minimum of 15 people for this reduced pricing and to help speed up the production. They would still make the bar if we don't get enough people, but the purpose of this pre-order is to prove to Progress that there is interest in this product as well as help them justify speeding up production. So far, no other company has shown interest or even mentioned offering a rear sway bar for the Yaris. Progress have already completed the development of this product and just need to put it into production.

Does anyone know what our front sway bar options are?
I ordered a C-One front sway bar from Bulletproof, it should be here in Feb. The stock front swaybar is actually pretty good already, but I'd like to try out the bigger one to compare. Cusco also offer a stiffer front sway bar. I wouldn't touch the stock front sway bar unless you already have a rear bar, upgrading the front without adding a rear first is a sure fire recipe for unmanageable understeer.

Originally Posted by eco ↑
Im also thinking about gettin in on this,if it comes to a point where theres 13 people,and you need 2 more,deffinitly count me in.
Sounds good. Should I add you to the list for now?
03Z33Thread starterSoCal · Jan 14, 2007#18
Originally Posted by ASHRAF ↑
can I see some pics

I am thinking about it
I don't have any pics of the actual Yaris sway bar that will go into production. It is very similar to the sway bars on other cars such as the Corolla and Scion, you can view these on the Progress website here:

www.progressauto.com

Here's a link to a pic of one of their other sway bar kits (Yaris will only have the one rear bar):

http://www.progressauto.com/store/images/RSXCIV~1.JPG

Picture not included in this copy
dngzvancouver · Jan 14, 2007#19
1. 03Z33
2. heylookitsjames
3. kngrsll
4. acrbill
5. dngz
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
03Z33Thread starterSoCal · Jan 14, 2007#20
dngz, thanks for joining! I added you to the original post too :)
spkrman2 · Jan 14, 2007#21
so this bolts right into place?
punchBarrie, ontario · Jan 14, 2007#22
yeah i have a question, you say it bolts to the stock spring cups? is that the top of the springs, inside the trunk/hatch or outside the car underneath??? I don't want anything taking up my trunk space.
03Z33Thread starterSoCal · Jan 14, 2007#23
Originally Posted by spkrman ↑
so this bolts right into place?
Originally Posted by punch ↑
yeah i have a question, you say it bolts to the stock spring cups? is that the top of the springs, inside the trunk/hatch or outside the car underneath??? I don't want anything taking up my trunk space.
The bar bolts underneath the vehicle to the rear trailing arm to reduce twist in the arm. It won't take up any room inside the car.

This is honestly going to be one of the simplest installs on this car, it shouldn't take more than 20 min. and simple hand tools. You probably won't even have to remove the wheels. Here is a picture of the bar on the Scion Xb/Xa:

Picture not included in this copy

Keep in mind that the Scion had a sway bar built into the stock trailing arm also, which we don't even have. This is going to make a big improvement on our cars!

Punch, thanks for the PM! I added you to the list 👍
woofDeep South · Jan 14, 2007#24
woof is seriously, seriously interested. Right now, you're saying $140 delivered, right? Well, will it come with photographic instructions?
kngrsllSpartanburg, SC · Jan 14, 2007#25
sway bar install's are one of the easiest mod's to do really.

oh, ive got a friend with a yaris, he seems intrested. i sent him the link to the thread, but he isnt that great with the internet so i may be doing all that for him, so we will see. ill try and contact him again and see whats up.
dngzvancouver · Jan 14, 2007#26
i dont think it is that simple... u gotta remove the stock sway bar first!
acrbillchicago · Jan 14, 2007#27
Originally Posted by dngz ↑
i dont think it is that simple... u gotta remove the stock sway bar first!
There is no stock rear sway bar.

I sure hope that its a bit more involved than the sway bar for the Scion since that sure doesn't look like it is going to do anything. Its a bar that is attached to a solid rear beam axle and nothing else. Seems like it would be like trying to stiffen a pencil by gluing a tooth pick to it. You would think it would be mounted to the chassis at some point.
Doc ZaiusOttawa, ON, Canada · Jan 14, 2007#28
Is the progress rear sway bar going to be similar to the one in this article? sway bar for prius.

After reading that article, I understand how the bar would reduce understeer, which is good (to a point). But how would it work in connection with (or instead of) an front upper strut bar?

Thanks!
03Z33Thread starterSoCal · Jan 14, 2007#29
Originally Posted by woof ↑
woof is seriously, seriously interested. Right now, you're saying $140 delivered, right? Well, will it come with photographic instructions?
Yes, the price includes shipping! We may even be able to reduce the price a little more if we can get more than 25 people signed up. It includes instructions with pictures, and I will be posting instructions on the forums once I install mine.

Originally Posted by kngrsll ↑
sway bar install's are one of the easiest mod's to do really.

oh, ive got a friend with a yaris, he seems intrested. i sent him the link to the thread, but he isnt that great with the internet so i may be doing all that for him, so we will see. ill try and contact him again and see whats up.
Sounds good! Just let us know if he want's in.

Originally Posted by dngz ↑
i dont think it is that simple... u gotta remove the stock sway bar first!
That's the point! There is no stock sway bar 😆 This really will be as simple as just a few bolts, but it really does make a big difference.

Originally Posted by acrbill ↑
There is no stock rear sway bar.

I sure hope that its a bit more involved than the sway bar for the Scion since that sure doesn't look like it is going to do anything. Its a bar that is attached to a solid rear beam axle and nothing else. Seems like it would be like trying to stiffen a pencil by gluing a tooth pick to it. You would think it would be mounted to the chassis at some point.
It actually is very similar to the Scion design. If you study some other cars with similar trailing arm rear suspensions you'll find that this is the most effective way of controlling roll in the rear. The trailing arm is designed with a certain amount of flex/twist from the factory and this arm will help reduce the flex and minimize the roll allowing the car to corner flatter with less deflection in the rear end. Even the stock VW/Scion sway bars are mounted the same way.

Originally Posted by influx ↑
Is the progress rear sway bar going to be similar to the one in this article? sway bar for prius.

After reading that article, I understand how the bar would reduce understeer, which is good (to a point). But how would it work in connection with (or instead of) an front upper strut bar?

Thanks!
That's a very good article, thanks for sharing! Our bars will be very similar to that one (except they'll bend backwards towards the spring/shock like the picture above). I actually had one of the straight style ones on my VW before and it works well, but requires you to drill holes in the trailing arm which would complicate the install for most. I think the way Progress do it is better for most do it yourself installers. I can't believe they charge $285 for that bar!

The front strut bar, rear strut bar (upper), and other chassis reinforcement bars can help improve your handling also by reducing chassis twist. Most of the ones that go on the front, will theoretically increase chances of understeer and bars that go on the back should increase oversteer. In my oppinion, the rear sway bar is by far the most effective one from the above mentioned bars.

largeorangefont is now confirmed, let me know if anyone else wants in!
Chris07LBNew Jersey · Jan 14, 2007#30
Originally Posted by dngz ↑
i dont think it is that simple... u gotta remove the stock sway bar first!
Er, what "stock sway bar?" 😕
03Z33Thread starterSoCal · Jan 14, 2007#31
Originally Posted by Chris07LB ↑
Er, what "stock sway bar?" 😕
Haha, give him a break 😉 It's not his fault Toyota cheaped out THAT MUCH and didnt' even install a rear sway bar on these cars! 😆 I wouldn't believe they still made cars without rear sway bars if I didn't own one myself 😁
dngzvancouver · Jan 14, 2007#32
HAHAHA my bad!! i just assumed the yaris would have one!
dansidesdallas · Jan 14, 2007#33
ACRBILL add me to list for rear sway bar tks dansides
03Z33Thread starterSoCal · Jan 15, 2007#34
Added dansides and cdydjded to the list, Thanks!
punchBarrie, ontario · Jan 15, 2007#35
did you see trd now has a rear sway bar for us?
Doc ZaiusOttawa, ON, Canada · Jan 15, 2007#36
Originally Posted by punch ↑
did you see trd now has a rear sway bar for us?
Ya... I'm wondering how much that would cost. Perhaps double the price for the Progress bar?
acrbillchicago · Jan 15, 2007#37
Originally Posted by influx ↑
Ya... I'm wondering how much that would cost. Perhaps double the price for the Progress bar?
I would rather have a bar that is connected to the shock mount than the spring cup. Its probably considerably more than I am willing to spend though.
03Z33Thread starterSoCal · Jan 16, 2007#38
Both bars are going to be pretty much identical. It doesn't matter what part of the trailing arm you bolt up to, it's all one piece. I'm not even sure exactly where the Progress bar bolts up to yet, until I see a pic of the prototype.

I called 3 dealers and TRD-USA today and no one has a clue about a TRD sway bar? TRD-USA said "we don't make one" and when I asked "are you sure, because someone on the forums has it?" his reply is "maybe it's someone elses?"

One of the three dealers said they may be able to get one for the Sedan only and there's no ETA? I asked for the price (knowing that if it fits the Sedan it will fit the hatchback also) and he said retail is $260 and he would sell it to me for $240 plus tax... I really hate dealing with the dealers 😕

If anyone that's on the list decides they don't want to wait for the Progress bar and want to try to get the TRD bar, that's fine. I'm planning to wait for the Progress bar, since it's most likely going to be very similar for half the price.
punchBarrie, ontario · Jan 16, 2007#39
Originally Posted by 03Z33 ↑
Both bars are going to be pretty much identical. It doesn't matter what part of the trailing arm you bolt up to, it's all one piece. I'm not even sure exactly where the Progress bar bolts up to yet, until I see a pic of the prototype.

I called 3 dealers and TRD-USA today and no one has a clue about a TRD sway bar? TRD-USA said "we don't make one" and when I asked "are you sure, because someone on the forums has it?" his reply is "maybe it's someone elses?"

One of the three dealers said they may be able to get one for the Sedan only and there's no ETA? I asked for the price (knowing that if it fits the Sedan it will fit the hatchback also) and he said retail is $260 and he would sell it to me for $240 plus tax... I really hate dealing with the dealers 😕

If anyone that's on the list decides they don't want to wait for the Progress bar and want to try to get the TRD bar, that's fine. I'm planning to wait for the Progress bar, since it's most likely going to be very similar for half the price.

goes to show you what trd usa knows, sparks toyota has it listed now... and its cheap, you can take me off your preliminary list, I'm sticking with trd, thanks
largeorangefontSo Cal, OC · Jan 16, 2007#40
Is progress planning to do springs and or coilovers as well or do you know?

If so, PM me. I'd be interested in donating my car for R&D

Ashley
largeorangefontSo Cal, OC · Jan 16, 2007#41
Originally Posted by punch ↑
goes to show you what trd usa knows, sparks toyota has it listed now... and its cheap, you can take me off your preliminary list, I'm sticking with trd, thanks

The TRD bar was on the toyota site a couple months ago. It is not on there anymore, nor are the springs and struts. I have been very impressed with Progress suspension products in the past. I'm in for the Progress part.
woofDeep South · Jan 16, 2007#42
I had a Progress rear sway on my xB and it had no mounting points. It free floated and was attached to the underside of the swing arms. When I looked at my Yaris hatch on the rack it looked a lot smaller up in there so I'm not sure if there is enough clearance for a "free floating" sway.

BTW, the Progress worked miracles for the xB. Unless you just want to spend money, it's the only suspension mod you need.

Go ahead and put me on the list.

-- WOOF 👍
ecoAtlanta · Jan 16, 2007#43
Ok,I still havnt decided,I need to know some real demensions,because Ive got a 2.5" custom cat. back exhaust,and the piping sites lower,about an inch lower then stock,plus I have a fart can NOPI style muffler(actually sounds deep,almost like a flowmaster thunder series muffler)so I dont know if it will fit,but I guess you can put me on the list for now.
03Z33Thread starterSoCal · Jan 17, 2007#44
Originally Posted by largeorangefont ↑
Is progress planning to do springs and or coilovers as well or do you know?

If so, PM me. I'd be interested in donating my car for R&D

Ashley
I believe they have a test car already, they said so when I offered my car for the sway bar testing. I'll ask about springs and coilovers tomorrow.

Added woof and eco, removed punch.
Black YarisToledo, OH · Jan 17, 2007#45
dumb question, but how exactly does the rear sway bar work when it is attached to the rear dead axle only?
03Z33Thread starterSoCal · Jan 17, 2007#46
Not dumb at all, the rear trailing arm is designed to twist, by adding the bar you are stiffening the arm and reducing the excess twist which will help minimize body roll and will help transfer weight to the outside wheel in turns.
acrbillchicago · Jan 17, 2007#47
I decided to go with the TRD bar so you can take me off the list.
ItsMyDailyLos Angeles, CA · Jan 17, 2007#48
Let me know when there is a front/rear set and I'm all for it.
03Z33Thread starterSoCal · Jan 18, 2007#49
Originally Posted by acrbill ↑
I decided to go with the TRD bar so you can take me off the list.
removed

Originally Posted by ItsMyDaily ↑
Let me know when there is a front/rear set and I'm all for it.

I don't know if there are plans to do a front sway bar at this time, there are other front sway bars available from C-One, Cusco, etc... which will work well with this rear sway bar.

I just recieved an update from Progress and it seems that production is going to take longer than I originally estimated. The soonest we can see these finished bars is 12 weeks from now and I don't feel comfortable collecting anyones money for that long, so I'm going to put this on hold for now. Please continue to update me if you are interested, or if you want to be removed from the list, and I'll be updating everyone once the bars are closer to completion.
NimbleChicago, IL · Jan 27, 2007#50
Does the yaris come with one stock? I didn't see one in the rear, I know we have one in the front though.