Yarisworld Archive

Building a New Exhaust... Need some opinions.

22 posts · 9,456 views

DTM_YarisOriginal postDulles, VA · Dec 28, 2006#1
Hey guys I'm finishing up on the Yaris exhaust this week and would appreciate some feedback on the type of muffler to use.
There are alot of ricy looking mufflers out there along with many opinions on what sounds and looks to good.
If we could get some kind of consensus on what you would like to see on a Yaris, I would appreciate it.
Thanks for your time.

Replies 21

TamagoOff Grid · Dec 28, 2006#2
straight thru design, short.. something simple.

is your exhaust stainless?
DTM_YarisThread starterDulles, VA · Dec 28, 2006#3
Originally Posted by Tamago ↑
straight thru design, short.. something simple.

is your exhaust stainless?
Completely stainless and tig welded.
The problem is that the majority of the "cans" are about 20" long. I need to confirm it will look and sound good. They also have a huge tip. Also do not want it to look like it is hanging too low.
It will be a marketable item so your opinion counts.
Have any links to something you have seen?
spkrman2 · Dec 28, 2006#4
im happy with my magnaflow.
acrbillchicago · Dec 28, 2006#5
what size is the stock exhaust?
TamagoOff Grid · Dec 28, 2006#6
Originally Posted by DTM_Yaris ↑
Completely stainless and tig welded.
The problem is that the majority of the "cans" are about 20" long. I need to confirm it will look and sound good. They also have a huge tip. Also do not want it to look like it is hanging too low.
It will be a marketable item so your opinion counts.
Have any links to something you have seen?
how about if you use a set of resonators instead of an actual muffler.

let me see what pictures i can find. do you want twin tips?
graywolf_14Wichita ks · Dec 28, 2006#7
Well I know a honda guy and he said the best sounding muffler on a honda is those cheap $20 turbo mufflers at autozone so it might sound good.
NutzoidsPhiladelphia · Dec 28, 2006#9
My other car is a 2000 Nissan Maxima and I always have thought that the duel tip looks so clean. Here is a picture:

http://cgi.ebay.com/ebaymotors/Vibra...QtcZphoto#pics

Our Yaris is the epitome of OCD. EVERYTHING in the car is symmetrical. I would personally like to see an exhaust come out the center of the car kind of like the Mini

http://lauderdale-bmw.ebizautos.com/...src=eBay&pid=6

But hell that’s just me. And no matter what you do… I’ll most likely buy one off you either way…
East Coast Pride!

😈
TamagoOff Grid · Dec 28, 2006#10
i agree, center exit exhaust would look excellent
ChinoCharlesOH · Dec 28, 2006#11
Give me 20 minutes and I'll go prop my muffler under the car so you guys can see what it would look like. Dual 3.5" tips center mounted.
acrbillchicago · Dec 28, 2006#12
Originally Posted by ChinoCharles ↑
Give me 20 minutes and I'll go prop my muffler under the car so you guys can see what it would look like. Dual 3.5" tips center mounted.
I bet it looks nice.

Measure the stock pipe diameter while your under there!
PetersRedYarisThe Black Hills of South Dakota · Dec 28, 2006#13
Center mounted would be sweet if it doesn't hang to low. Something oval or even wider tucked up nice and tight would be ideal. Dual tips, maybe? Stainless only! Price it lower than the Tanabe Medallian touring and I'll wait for it.
ChinoCharlesOH · Dec 28, 2006#14
Bad lighting for a picture today... it looks like I shaved the Toyota badge! In any case, here you go.

Picture not included in this copy

Muffler is found here.
http://meganracing.com/products/prod...id=65&catid=45

I still have about 4 inches of clearance underneath the muffler.

Riceboy is seeing if Megan would be interested in packaging the piping and mounting hardware necessary to center-mount one of their universal mufflers on a Yaris. Basically an axle-back without those funny bends.

Also, the stock exhaust diameter appears to be right around 2" on the button.

1 attachment not included in this copy

acrbillchicago · Dec 28, 2006#15
Doesn't look nearly as nice as I hoped. I think its the fact that you see the muffler body. Perhaps if it would look nicer (to me) if it was just a dual tip and the muffler was tucked up out of view.

Picture not included in this copy

If the exhaust is 2" already I can't imagine any significant increase beyond a less restrictive muffler.

Less restrictive muffler usually means less weight and more noise.
ChinoCharlesOH · Dec 28, 2006#16
Keep in mind that you won't see the body of the muffler with a Kaminari rear lip. 🙂
NutzoidsPhiladelphia · Dec 28, 2006#17
Yo ChinoCharles Thanks for doing that for us, but that is one seriously large F-ing muffler! Your tips are the size of your license plate. I have to agree with ACRBill, it's not as nice looking as I thought it would have been, but if it was a smaller tip I still think it would rock hard core!

😈
ChinoCharlesOH · Dec 28, 2006#18
I was admittedly weary about this muffler. I am not an advocate of big ricey mufflers on low displacement engines, but you know... Megan Racing was kind enough to take a chance and make parts for this car having no idea whether or not the market was even there, so I wanted to buy a Megan muffler as a way to support the company's decision to bring parts to this community.

They had two dual-tip mufflers, one with 3.5" tips and one with 4" tips. I got the smallest I could. I'm excited to see it installed.
NutzoidsPhiladelphia · Dec 28, 2006#19
Good for you then... that shows integrity!

Are you going to give us a sound clip when it's on?

😈
ChinoCharlesOH · Dec 28, 2006#20
Of course.

I wouldn't go as far as saying it shows integrity, but guys, this is the game. If we don't continue to buy parts from these companies, then guess what... there is no aftermarket, and we only have ourselves to blame.

Keep that in mind when NST starts selling their pulley here soon. If you'd like a full pulley kit, buy the crank pulley and let them know that we are serious about this car.
DTM_YarisThread starterDulles, VA · Dec 28, 2006#21
Originally Posted by spkrman ↑
im happy with my magnaflow.
Do you have any pics?
DTM_YarisThread starterDulles, VA · Dec 28, 2006#22
Originally Posted by Tamago ↑
how about if you use a set of resonators instead of an actual muffler.

let me see what pictures i can find. do you want twin tips?
Thats exactly what I was thinking last week.
I was going to run two resonators, one in the mid pipe and the other would actually BE the muffler with an oval tip.
I think I am going to lean to that approach.
I have two setups, one for N/A and one for turbo applications.
I'll finish up this weekend and post some pics.