fantabulousbabyOriginal postHouston · Dec 21, 2006#1They're finally installed, looks just like factory. Sorry for bad quality pic, it's a gloomy day and I took it on my camera phone. They actually have more 'presence' than it seems in this pic cuz it's dark. But, love them! Gets even more looks now. Maybe I'll post better pic another day. 👍
1 attachment not included in this copy
Replies 29
TrancosRtS Florida · Dec 21, 2006#2Please, post more pics, because I'm thinking of getting those as a christmas present for myself!!
Kaotic LazagnaCentral Valley, CA · Dec 21, 2006#3how was installation? did your Yaris come pre-wired?
ViolinNew Jersey · Dec 21, 2006#4More, bigger!
I can't even see them.
Thanks.
fantabulousbabyThread starterHouston · Dec 22, 2006#5Alrighty. Here r some better pics of the fog lights- also, one pic of the exhaust tip from trdsparks. Now I'm slightly annoyed after noticing my tip is a little crooked and one fog light is noticeably brighter than the other??
To answer one of the questions, I don't know if the yaris was pre-wired.. but I think so. Mine's the S model though, not sure bout the base model. I was told it was a simple job and took about 2 hrs maybe. The guy who did it was foreign and I didn't really understand him, but I know he had to put the wires through under the center console/radio/gearbox area. I think the plastic vent looking covers that exist just pop off (unscrew).
Don't go to the dealership though, they didn't even look at my fog lights and quoted $380 for labor (!). Then I got quoted $150 for labor from one of those 'pimp your ride' garages. My guy friend ended up taking it to some auto repair but would'nt tell me how much he paid for me (I think $60-$100). I think you guys might can do it yourself, I'm a girl so there was no way 👍
5 attachments not included in this copy
ViolinNew Jersey · Dec 23, 2006#6It would be a simple matter to straighten that tip. Maybe 60 seconds of work.
I don't know what to tell you about the uneven brightness of the fogs. It could be a couple of different things, the simplest being a new pair of high quality bulbs.
Thanks for the pics. I can't wait to get mine.
ViolinNew Jersey · Dec 28, 2006#7I recieved mine. They look to be pretty decent quality.
These take H11 bulbs which are 1,350 lumens. With a little modification to the bulb, it can take the 2,100 lumen H9 bulb - only 65 watts versus 55 watts.
I'm going to test the beam and see if it will be suitable to use as a high beam to replace the high beams I'm losing when I finish my HID retrofit. Perhaps I can open them up and place a shield across the bottom or something.
If not, I'll sell them and figure out a way to mount the Hella 90mm high beam modules. Those would be the better light, but mounting these would be a lot easier.
2 attachments not included in this copy
ChinoCharlesOH · Dec 28, 2006#8What is the diameter of those fog lights? Anyone?
ViolinNew Jersey · Dec 28, 2006#9About 3.25".
ChinoCharlesOH · Dec 28, 2006#10Thanks Violin. I'm gonna go out and see if you could squeeze 4 inches in there.
Squeeze 4 inches in there... LOL! -slaps forehead-
NutzoidsPhiladelphia · Dec 28, 2006#11😆
Too many Comments...
Good Times
😈
redglare45Pomona / Pasadena, California · Dec 28, 2006#12Those look pretty sweet. Hopefully you can figure out why one is brigther than the other.
ViolinNew Jersey · Dec 29, 2006#13 Originally Posted by
ChinoCharles ↑ Thanks Violin. I'm gonna go out and see if you could squeeze 4 inches in there.
You could put a little larger diameter light in there, up to about 3.5" or so without cutting the bumper itself - the trouble is finding a way to attach them. These attach directly to the brackets built into our bumper. There isn't anything else nearby to attach to so you'd have to make some sort of custom bracket to attach any other light to the inside of the bumper - not too simple.
I tested the beam pattern from these and it's really pretty good. There is a sharp cutoff with very little light above it so they should work well as fogs. That cutoff would make a lousy high beam though (what I want them for). However, it looks like I can simply turn them upside down and mount them on the opposite sides, drill one hole in the bracket and I'd have light above a sharp cutoff - great for a high beam. I hope I can aim them so the cutoff line matches the cutoff line from my HID lows. Since they won't be on for more than a few minutes at a clip, they shouldn't get too hot with the H9 bulb. If they were used as fogs with the H9 and left on for a while, it may overheat and deform the housing or something - probably best with the H11 bulb they come with.
Chiefy707707 Cali USA · Jan 6, 2007#14Is it possible the left foglight appears brighter than the right because beam angle relative to the camera?
This was on my "to-get" list too, but if it's really crap like that I'll just continue my search for the actual factory units.
ViolinNew Jersey · Jan 7, 2007#15Mine are the same brightness but I didn't use the supplied harness.
ViolinNew Jersey · Jan 8, 2007#16How does that foglight switch work? Does it always have a green glow around the graphic of a light and the rectangular green light only come on when you depress the button to turn them on?
The reason I'm asking is I want to use the switch to control my custom eyebrow lights but I'm kind of baffled. Mine has 3 wires, a ground, one to illuminate the graphic and one for the rectangular light. It doesn't matter whether it is depressed or not, the light always stays lit. The switch doesn't seem to have on on/off function. The harness came with a relay but I've hacked the wiring up already and can't make sense of the supplied instructions. Anyone?
AdriaanMontreal · Jan 8, 2007#17it depends on which ebay lights you got there one set that has 2 bulbs one to indicate your running lights are on lights the rest on the switches in the car & the the other bulb to tell when the foglights is on. The version i have only lights up when the fogs are on. I got the instruction in a word format i can email them to you if you want.
ViolinNew Jersey · Jan 8, 2007#18The one I have looks just like the pic fantabulousbaby posted. There are two bulbs - one that lights up the graphics and one for that rectangular light above it - so it sounds like you've got a different version, thanks.
I like it more than the standard Toyota fog light switch, but I may end up using one of them if I can't figure this one out.
Picture not included in this copy
nick34Singapore · Jan 9, 2007#19When you switch on your small lights, the pic of the foglight will light up.
When you switch on your headlights, the square will light up
When you didnt switch on any of your lights, there wont be any lights on the switch
Ive DIY mine foglights on my Yaris.
Picture not included in this copy
Picture not included in this copy
ViolinNew Jersey · Jan 9, 2007#20So when you depress the button, the fog lights turn on and the green rectangle lights up?
nick34Singapore · Jan 9, 2007#21when i depress the button without turning my light switch, the switch nor the foglights light up
Ive connected the switch to my parking light (small headlights) which means if i were to on my foglights i need to on my parking lights .. you can even change the switch to other kinds of switch like the one i did for my interior neons ..
Picture not included in this copy
Picture not included in this copy
fantabulousbabyThread starterHouston · Jan 10, 2007#22For my Ebay OEM fog lights, there is always a dim green glow on the switch as long as the car is turned on. When the lights are turned ON, the green glow gets brighter and the tiny rectangle above the fog light symbol glows as well.
I know for sure one light is brighter than the other, not because of my camera, it's really obvious by eye at night.. it irritates me but I don't necessaryily want to go back to that guy to ask what happened. Maybe the one bulb was faulty, wasn't on tight, or wiring? Or maybe cuz they're cheap bulbs and I need to buy some HID's. Really, I turned them on at nighttime and currently those bulbs don't do much (no, it wasn't foggy but in my previous cars they also worked well as extra lighting at night). For now, it's just for looks and I don't turn them on- I just hated seeing those black plastic covering over the 'holes'.
ViolinNew Jersey · Jan 11, 2007#23Thanks.
Have the installer take a look. It's possible that the one bulb isn't installed correctly and is just sort of hanging in there - it wouldn't be waterproof.
nick34Singapore · Jan 12, 2007#24 Originally Posted by
Violin ↑ Thanks.
Have the installer take a look. It's possible that the one bulb isn't installed correctly and is just sort of hanging in there - it wouldn't be waterproof.
Picture not included in this copy if you are using the above foglight kit, check if the green wire is connected to the parking lights wire. It should be green in colour.
Step by step guide to install a foglamp kit
Full Kit
Picture not included in this copy The switch
Picture not included in this copy Two sets of harness
Picture not included in this copy White molex connector connect to 2nd set of molex connector
C shape clip connect to ground (Chassis)
2 Black holders for H11 bulbs
Picture not included in this copy Green wire to parking light wire which can be found just behind your headlight assy.
Blue wire to Batt
Black connector to relay
White molex connector connect to 1st set of molex connector
Green connector connect to the switch on your dash
The Relay
Picture not included in this copy For the switch wire, you need to cut a hole on a rubber seal which is available on your firewall (your firewall should have 2 rubber seals) to pull the switch wire to your dash. Do this before connecting the switch.
Please take note that you are to cut a hole just enough for the wire to go through and not too big. If you cut a big hole, you will end up getting more engine noise in the cabin.
Also take note that the batt wire will be the last thing to connect.
After fixing on every connection, do a test on the foglamp to see if it's working before you put the bumper back so as to save time troubleshooting should there be any problem.
If anyone need more explaination feel free to PM me.
BlenjarCT · Jan 12, 2007#25More pictures...
-- Blen
St_GMemphis, TN USA · Jan 14, 2007#26Any chance for a more detailed step-by-step breakdown of the install? Perhaps with pictures to explain what you mean? Some of the language seems a little unclear.
nick34Singapore · Apr 18, 2007#27 Originally Posted by
Blenjar ↑ More pictures...
-- Blen
sorry for the late reply
will post up more pictures when im doing installation for my friend.
Currently ive fixed up 4 Yaris with the kit that I posted
DJ_TrizzakVancouver, BC · Apr 18, 2007#28check PM - thanks
RnankooNew Jersey · Apr 1, 2009#29if u connect the green wire to the battery wat would happen ??
marktvbmel · Apr 28, 2009#30 Originally Posted by
nick34 ↑ sorry for the late reply
will post up more pictures when im doing installation for my friend.
Currently ive fixed up 4 Yaris with the kit that I posted
would u mind to post some pics about how to connect each wires
it is the most difficult part for me
now my switch was on but the light still not work
hope u can teach me to solve the problem shortly
thank🙇you