RSboyzOriginal postVancouver · Dec 11, 2006#1Hey guys, correct me if im wrong, but i think i remember reading a thread about changing headlight bulb tutorial in the forum before, and im planning to change my bulbs this weekend, so i want to find the tutorial and read about it. oh and if you guy have any opinion or idea about the bulbs, throw them in here and i will be happy to hear about them.
Im planning to get the PIAA H4. is there a blue coating on the bulbs? and i have fog lights as well cuz of the RS model, not sure if the white light from the headlight would match the stock yellow light from the fogs 🤷
Replies 27
ViolinNew Jersey · Dec 12, 2006#2I think all the PIAA's have a coating.
I'll be pulling
these out of my brand new fog lights and will likely offer them here cheap. If your fogs take H3, you might want to buy them from me to better match your headlights.
Chris07LBNew Jersey · Dec 12, 2006#3FYI - your factory owners manual explains how to change evey bulb in your Yaris.
RSboyzThread starterVancouver · Dec 12, 2006#4i read it and since my car is not here with me and those diagrams are shitty so i dont have a picture of the headlight unit in my head in order to understand them or maybe im just too neewb.
Violin: is it hard to change the fogs? because in the manual it said bring it to the dealer if you want to change them because you may damage the vechile.
RSboyzThread starterVancouver · Dec 12, 2006#5that sounds pretty easy, but i never done it before and im always afraid i do something wrong and damage my car
Chris07LBNew Jersey · Dec 12, 2006#6 Originally Posted by
RSboyz ↑ that sounds pretty easy, but i never done it before and im always afraid i do something wrong and damage my car
Take it to the dealer then.
ChinoCharlesOH · Dec 13, 2006#7Don't be scared, it ain't a bimmer. 😁
KSIbuckyFond du Lac, WI · Dec 13, 2006#8i just had some one do it if you bring the balbs when you get your oil changed they'd do it for free
KatanaUnder the hood! · Dec 14, 2006#9 Originally Posted by
Chris07LB ↑ FYI - your factory owners manual explains how to change evey bulb in your Yaris.
Really?I have some reading to do!
BlenjarCT · Jan 9, 2007#10I just changed the bulbs with the Osram or w/e...um didn't use a glove...hahaha well I had sum1 else help me..anywa what happen if u don't use gloves?
-- Blen
ViolinNew Jersey · Jan 9, 2007#11Oils from your hands will cause them to burn out really fast. Take them out and clean them with isopropyl alcohol and reinstall them using gloves.
Chris07LBNew Jersey · Jan 9, 2007#12Think of it as practice, as your going to be pulling them soon, once they blow.
Take V's advice, and clean them before that happends... and to answer your next question, you can buy the isopropyl alcohol at any food store, or pharmacy.
KatanaUnder the hood! · Jan 10, 2007#13You have the answer for every question!
Chris07LBNew Jersey · Jan 10, 2007#14ok. wait, was that a question too? 😛
spkrman2 · Jan 11, 2007#15swapping the bulbs is not for those with big hands...
some blood sweat and tears later... I got mine swapped out, but it was so extremely hard to fit my fat hands in there.
The manual is very vague... but it tells you enough so that you can do it.
BlenjarCT · Jan 11, 2007#16Damn...burn them out huh...well I'll change them next monday when I get my fog lights...I mean I have to take the bumper off right?
-- Blen
OglyYaRiSPlanet Earth · Mar 15, 2007#17Sorry to bring up an old thread, I need help.
I'm not mechanically inclined, so I got my Headlight bulbs installed. My only complaint is, the way the lights aim are not the same. It looks a little low. How can I adjust the lighting of the aim until I feel its proper? Thanks for your time and help. 😁
ViolinNew Jersey · Mar 15, 2007#18Your driver's side headlamp is supposed to be a little lower than the other so you don't blind oncoming traffic.
Your dealer can adjust them for you but changing the bulbs won't change the alignment. They should still be at the factory setting.
If you download the factory repair manual, there is the procedure for properly aiming your lights in there but if you aren't mecahnically inclined enough to change the bulbs, I'd suggest letting your dealership do it.
ChinoCharlesOH · Mar 15, 2007#19🙄 🙄 🙄 🙄 🙄
🤣
OglyYaRiSPlanet Earth · Mar 15, 2007#20 Originally Posted by
Violin ↑ Your driver's side headlamp is supposed to be a little lower than the other so you don't blind oncoming traffic.
Your dealer can adjust them for you but changing the bulbs won't change the alignment. They should still be at the factory setting.
If you download the factory repair manual, there is the procedure for properly aiming your lights in there but if you aren't mecahnically inclined enough to change the bulbs, I'd suggest letting your dealership do it.
That might be true, but I park my car the same spot every night. I notice the aim was a little lower then it was before.Perhaps it was the bulbs I purchased. I just might put back the OEM bulbs. If that doesn't work, I"ll just bring it back to the dealarship.
OglyYaRiSPlanet Earth · Mar 15, 2007#21 Originally Posted by
ChinoCharles ↑ 🙄 🙄 🙄 🙄 🙄
🤣
😢 😢 😢
ChinoCharlesOH · Mar 15, 2007#22I wasn't rolling my eyes at you. Chris is a dirty post deleter.
OglyYaRiSPlanet Earth · Mar 15, 2007#23Oh, sorry.
ChinoCharlesOH · Mar 15, 2007#24'Tis OK. 🙂
Chris07LBNew Jersey · Mar 15, 2007#25 Originally Posted by
ChinoCharles ↑ I wasn't rolling my eyes at you. Chris is a dirty post deleter.
🤷 🤷 🤷 🤷 🤷
ChinoCharlesOH · Mar 15, 2007#26Unless I posted in the wrong thread? 🤷 Who cares.
Chris07LBNew Jersey · Mar 15, 2007#27dirty wrong post poster.
ChinoCharlesOH · Mar 15, 2007#28My head hurts.