Yarisworld Archive

What would the labor costs be to install a spoiler?

12 posts · 26,503 views

JerseyJeff84Original postWest Deptford, NJ · Aug 17, 2010#1
I'd like to eventually get a rear spoiler for my '10 Yaris Sedan. I found a site that had a spoiler with a taillight for $130 and to have it painted the exact color of your car was an extra $80. Approximately how much would the installation costs be from a mom & pop shop? Has anyone had this done yet?

Replies 11

sickpuppy1Kansas · Aug 17, 2010#2
Where are you getting the spoiler from and what style is it? I ask because I got one through a dealer on Ebay and am very happy with it, but it was already painted. Heres a link to the current ad they run. Good quality, paint matched exactly, packed good and shipped within 2 days. I was very nervous about mounting it, measured several times, walked around it, measured some more, .......
Scary stuff drilling into your car, but worth it, since the actual install was two bolts and some wire. Let me know if you decide to do it yourself and I'll give you what tips I can.
NateDoggCanada · Aug 18, 2010#4
I agree with Sickpuppy1, do it yourself, you get a better sense of completion out of it, and its fun measuring 10 times before you drill.

If you do it yourself, measure, measure, measure, drill (use a pilot if you need to, dont dent your trunk), brush some paint on the bare metal, then use some butyl tape or the like on the nuts to prevent leakage.

I'd say if you take it to a body shop maybe $40-80 to install it.
BrianRiverside, CA · Aug 19, 2010#5
My spoiler cost me about $100 to get painted and installed along with plugging up the holes from my OEM spoiler.
JumpmanYarisSO. INDIANA · Aug 19, 2010#6
Originally Posted by Brian ↑
My spoiler cost me about $100 to get painted and installed along with plugging up the holes from my OEM spoiler.
Same here
FenrizwolfOHIO USA · Aug 20, 2010#7
I went the ebay route about 2 years ago. I got mine for 130 I believe, painted and everything, its the knockoff oem style but still looks good and led's still work. The instructions that came with it sucked, I looked up the oem instructions and did it in about 20 minutes. Of course I spent days mentally preparing and going through everything in my head. Be careful drilling into the deck. I did wander a bit at first. Luckily the spoiler covers it up. Plus nothing is perfect forever right?
JTDBT903NE. OHIO · Aug 20, 2010#8
Does anybody have a picture of the inside trunk lid mounting area on a sedan spoiler, I have a spoiler that I would like to use but would like to get an idea how the OEM one attaches!
Red HorseCosta mesa, California · Aug 22, 2010#9
I got a thai spoiler $140 unpainted and $120 to be painted but I install it my self. They have a DIY here
auxmikeLI, New Yawk · Aug 22, 2010#10
I did my own on the liftback.
A LOT harder install.
I bought the real Toyota spoiler. The templates they included were off about an inch, so I did it by laying the spoiler over the rear hatch and noting where to drill...
zachrybolesFt. Worth, Tx · Aug 22, 2010#11
i have the arto spoiler and im wondering your opinions on getting it patched up and painted as it has a long crack on a seam.....
NateDoggCanada · Aug 22, 2010#12
zachryboles
i have the arto spoiler and im wondering your opinions on getting it patched up and painted as it has a long crack on a seam.....
Bevel out the crack then glass it, or use panel bond from 3M, put on a skim of putty and your done. Or just return it or buy a new one cause most likely once its painted and on the car the rest of the seam will crack.