I JUST RUBBERIZED EVERYTHING UNDER THE CAR AND IT LOOKS GREAT I HOPE IT WORKS GREAT TO I WILL PUT PICTURE ON LATER CANT FIND MY SD CARD.THANKS
rubberizing every thing under the yaris
9 posts · 4,041 views
Replies 8
That was... probably a bad idea... 😆
Y IS IT A BAD IDEA?
Depending on where you place the rubber, it could melt as the engine heats up. Common places of extreme heat are on the exhaust manifold and the block itself.
no I make it under the trunk and by the side skirt. no place where there is heat.
If I had a lift I would probably undercoat my car too.
Living in NW PA sucks in the winter...
Living in NW PA sucks in the winter...
why did you do it? and what kind of material did you use?Originally Posted by Yaris PAVEL94 ↑I JUST RUBBERIZED EVERYTHING UNDER THE CAR AND IT LOOKS GREAT I HOPE IT WORKS GREAT TO I WILL PUT PICTURE ON LATER CANT FIND MY SD CARD.THANKS
Derick
.😉
derick- Going by your stereo setup, I'm surprised you haven't done it. Anything to help reduce road noise....I used a couple of cans of spray-on bedliner.
You would need at least 3 to 5mm to really notice a difference. It would be nice if there is something special for the plastic panels. I've been looking around but nothing, not even Spectrum Sludge from Secondskin would hold to plastic, I did ask them!Originally Posted by doginmyyaris ↑derick- Going by your stereo setup, I'm surprised you haven't done it. Anything to help reduce road noise....I used a couple of cans of spray-on bedliner.
Picture not included in this copy
It was / is on my to do list, but when I learned that MLV is more effective to block road noise I did that first.
bedliner spray it's very good to prevent rust as well! I used it many times for my Tacoma!
D.