can any one tell me how to remove my tag light bulb,coz I am going to replace it with a LED ! thnx
plz, show me how to remove Tag Light ?
6 posts · 3,556 views
Replies 5
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Insert a screwdriver in the position shown in the
illustration and move the license plate light in the
direction shown in the illustration to disengage the
claw.
(b) Disconnect the connector, then remove the license
plate light.
Picture not included in this copy
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Insert a screwdriver in the position shown in the
illustration and move the license plate light in the
direction shown in the illustration to disengage the
claw.
(b) Disconnect the connector, then remove the license
plate light.
Picture not included in this copy
1 attachment not included in this copy
thnx a lot, i did it, it was easy. thnx again
I don't think it's nessary to remove the battery cable to change a light bulb.
I can assure you, even the dealer does not remove the cable to change a bulb.
Just turn the switch to off. 🙂
I can assure you, even the dealer does not remove the cable to change a bulb.
Just turn the switch to off. 🙂
Indeed. That's just a cut and paste from the service manual.Originally Posted by RedRide ↑I don't think it's nessary to remove the battery cable to change a light bulb.
I can assure you, even the dealer does not remove the cable to change a bulb.
Just turn the switch to off. 🙂
the battery can stay connected, with the parkibg lights off there is no problem and if something happens is because you forgot to turn off the lights you just get a blown fuse, no biggie!