Yarisworld Archive

More carbon fiber wrapping

21 posts · 8,506 views

BrianOriginal postRiverside, CA · Aug 4, 2010#1
Here's some more pieces I'm working on.

Side trim pieces for stereo and climate control.

Picture not included in this copy

Vios rear window visor
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Glove box (inside)
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
The outline you see in the third pic towards the middle is a cut-out I made because I store my Sirius, HD radio, and MSN Direct tuners in the glove box and I need to run the wires out to the receiver.

Glove box (outside)
I added a MI decal and it will be covered in resin.
Picture not included in this copy

Replies 20

fnkngrvIn The Hotbox · Aug 4, 2010#2
so you are wrapping the entire glove box then? that is different and unique....cool.
BrianThread starterRiverside, CA · Aug 4, 2010#3
Originally Posted by fnkngrv ↑
so you are wrapping the entire glove box then? that is different and unique....cool.
I'm wrapping all the visible parts, mounting all my add-on's in it, adding some l.e.d.'s and putting a lexan cover over the top so when you open it up there's a lighted display.
kacWest/Central Illinois · Aug 5, 2010#4
badass.
LEGATO``Virginia Beach · Aug 5, 2010#5
Is this real life? So amazing!
Can't wait to see everything finished!
sleey0PA · Aug 5, 2010#6
You are pretty friggin good with that stuff. Ever think about doing it for money?

I know I would send you my engine cover to start with. I don't care if I would have to wait a week or two for it, your work is amazing.

I also know if I had those skills I would be advertising my services here like crazy.
BrianThread starterRiverside, CA · Aug 5, 2010#7
Originally Posted by sleey0 ↑
You are pretty friggin good with that stuff. Ever think about doing it for money?

I know I would send you my engine cover to start with. I don't care if I would have to wait a week or two for it, your work is amazing.

I also know if I had those skills I would be advertising my services here like crazy.
Thanks for the compliments. I really don't have enough free time to be taking on a bunch of projects. Maybe one or two at a time. If you want your engine cover done, PM me and we can work something out.
Nexus1155Dorchester · Aug 5, 2010#8
Nice work, what kind of resin do you use? I use to use the kleer kote stuff
BrianThread starterRiverside, CA · Aug 5, 2010#9
Originally Posted by Nexus1155 ↑
Nice work, what kind of resin do you use? I use to use the kleer kote stuff
West System 105 resin with 207 hardener
DeathBeardLos Angeles, CA · Aug 5, 2010#10
nice, is this hard to do?
BrianThread starterRiverside, CA · Aug 5, 2010#11
Originally Posted by DeathBeard ↑
nice, is this hard to do?
It all depends on the part. I think its more time consuming than it is difficult.
sleey0PA · Aug 6, 2010#12
Originally Posted by Brian ↑
It all depends on the part. I think its more time consuming than it is difficult.
So says the CF-wrapping pro!!! lol

Nah, you do some damn good work bro.

PM sent.
bzinn 1University Place,WA · Aug 7, 2010#13
CF is easy to work with really,but it gets spendy and takes a bit of time to get the coats flat and smooth.....love the work man,I cannot wait to start doing mine this Fall.
Klink10910 · Aug 7, 2010#14
I have to say "I am impressed"
BrianThread starterRiverside, CA · Aug 7, 2010#15
Originally Posted by bzinn 1 ↑
CF is easy to work with really,but it gets spendy and takes a bit of time to get the coats flat and smooth.....love the work man,I cannot wait to start doing mine this Fall.
I agree. Most of the work is sanding. I usually end up putting 5-6 coats of resin on each piece. Everything else is easy. The resin and hardener was the most expensive part for me. The CF itself is only about $30/yard.
blacksandiegovitzJust chillin' out brah ! · Aug 7, 2010#16
Nice work Brian , cant wait to see the parts in person @ nisei next weekend !
big loLoiza,Puerto Rico · Aug 7, 2010#17
That some skill Brian, really awesome stuff, remember we have some business in September, peace my dude. PM me when you are ready, one.
BrianThread starterRiverside, CA · Aug 8, 2010#18
Originally Posted by big lo ↑
That some skill Brian, really awesome stuff, remember we have some business in September, peace my dude. PM me when you are ready, one.
I plan on using CF for your parts.
minired5stbySan Diego · Aug 8, 2010#19
Coolness bro I might need your assistance on something with that stuff if thats cool.
big loLoiza,Puerto Rico · Aug 8, 2010#20
Originally Posted by Brian ↑
I plan on using CF for your parts.
I wish it was September already, talk to you soon buddy.
BrianThread starterRiverside, CA · Aug 8, 2010#21
Originally Posted by minired5stby ↑
Coolness bro I might need your assistance on something with that stuff if thats cool.
Not a problem. You got my #, just send me a text.