Yarisworld Archive

New wheels on the car.

9 posts · 3,935 views

RHDVIPbBOriginal postLouisville, KY · Jul 30, 2010#1
Finally got my wheels mounted. 17" Maas 026C with 215/45/17 Falken tires.

I will be going lower pretty soon. Just have some more important things first to finish.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 8

JumpmanYarisSO. INDIANA · Jul 30, 2010#2
YEAHHHHH WOOOHOOOOO ABOUT TIME MAN!! hehehe
Kaotic LazagnaCentral Valley, CA · Jul 31, 2010#3
Cool, cool. Looks like you're going to have rubbing problems when you lower it. Easy fix tho. Roll fenders/camber/narrower tires (mild stretch). How low are you planning on going?
RHDVIPbBThread starterLouisville, KY · Jul 31, 2010#4
Originally Posted by Kaotic Lazagna ↑
Cool, cool. Looks like you're going to have rubbing problems when you lower it. Easy fix tho. Roll fenders/camber/narrower tires (mild stretch). How low are you planning on going?

What rubbing problems? I already lowered it with the new tires. Sent the shocks out to get revalved since I want a slightly stiffer ride. I am rolling the fenders when I get some free time. Other than that, I plan on going with a PG spacer in the rear to bring it a bit more flush.
JumpmanYarisSO. INDIANA · Aug 2, 2010#5
You lowered the car?
RHDVIPbBThread starterLouisville, KY · Aug 2, 2010#6
Originally Posted by JumpmanYaris ↑
You lowered the car?
When I put the wheels on, but took them back off. I am getting the shocks re-valved.
Kaotic LazagnaCentral Valley, CA · Aug 4, 2010#7
Originally Posted by RHDVIPbB ↑
What rubbing problems? I already lowered it with the new tires. Sent the shocks out to get revalved since I want a slightly stiffer ride. I am rolling the fenders when I get some free time. Other than that, I plan on going with a PG spacer in the rear to bring it a bit more flush.
May be it's the angle of the pics...I thought you were going to have some rubbing. But that's cool that you don't have any rubbing issues.
33OHDover, Ohio · Aug 4, 2010#8
^ I would have guessed rubbing issues too, looks like quite the poke in the first pic. :)

Lookin' good RHD!
RHDVIPbBThread starterLouisville, KY · Aug 10, 2010#9
Originally Posted by Kaotic Lazagna ↑
May be it's the angle of the pics...I thought you were going to have some rubbing. But that's cool that you don't have any rubbing issues.
The fronts get cambered in a little bit when it is lowered. These shots were at stock height.