eTiMaGoOriginal postBangkok, Thailand · Jul 27, 2010#1Haven't really updated you guys with latest happenings with my car, so here goes...
New wheels, some underhood goodies, back to stock mirror covers, more dings and scratches 😆
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 25
fnkngrvIn The Hotbox · Jul 27, 2010#2still a very sharp looking ride
eTiMaGoThread starterBangkok, Thailand · Jul 27, 2010#3thanks man :)
I really gotta take it to a pro detailing shop, there's only so much I can do with my basic equipment and lack of patience 😆 (you can see I missed cleaning on back wheel, doh!)
JumpmanYarisSO. INDIANA · Jul 27, 2010#4Nice Thomas
I feel like there is something missing idk what
It might be because the white wheels you used to have, but the ride looks good.
eTiMaGoThread starterBangkok, Thailand · Jul 27, 2010#5yeaaaah I do miss them, they really defined the car... who knows, maybe in the future I'll use these as the "go" wheels, and get some big white ones again for "show"...
evo165*tIny dOts iN AsiA* · Jul 27, 2010#6All you need now is frt JDM RS bumper & side skirts!! 🤘
KioshiFremont, CA · Jul 27, 2010#7FINALLY! We barely see pics of your car.
white wheels are gone :(
Although you can drop the car a tad lower now hehe.
Black wheels looks pretty sharp on the car Thomas. Your intake looks a bit dusty/rusted, time for a new intake from Garm ;)
tomatoSan Francisco Bay Area · Jul 27, 2010#8I was scratching my head wondering what was missing ... doh! the white wheels!! 😢
Nice look, though. I liked that you're not dropped too low, so you don't have to scrape in certain road conditions.
thanks for posting those new pics . moar , yo! 🤘
firemachine69Sudbury, On · Jul 27, 2010#9Needs boost. 😁
eTiMaGoThread starterBangkok, Thailand · Jul 28, 2010#10 Originally Posted by
Kioshi ↑ FINALLY! We barely see pics of your car.
white wheels are gone :(
Although you can drop the car a tad lower now hehe.
Black wheels looks pretty sharp on the car Thomas. Your intake looks a bit dusty/rusted, time for a new intake from Garm ;)
Actually, the wheels are shorter than the old ones (195/50), so I scrape a lot more than I used to! I'm considering raising the suspension half an inch 😆
The intake, yeah, it's a 90 degree rubber coupler that's getting kinda rotten... an AFE would be on my wishlist for later!
Originally Posted by
evo165 ↑ All you need now is frt JDM RS bumper & side skirts!! 🤘
Someday, someday 😉
Originally Posted by
tomato ↑ I was scratching my head wondering what was missing ... doh! the white wheels!! 😢
Nice look, though. I liked that you're not dropped too low, so you don't have to scrape in certain road conditions.
thanks for posting those new pics . moar , yo! 🤘
yep, like I said, gonna miss those wheel :p
Originally Posted by
firemachine69 ↑ Needs boost. 😁
Someday, someday 😉
aucoriumSouth Africa · Jul 28, 2010#11YAY !!! the cabby is back and going strong , love the new Regmasters man !!! still looks good as ever , i bet the car is pulling better now aswell ? now to set those coilovers a few mm lower :-)
tca4Delta,BC · Jul 28, 2010#12Looks very nice!! love the red black combo as well
HTM Yarissouth Carolina · Jul 29, 2010#13Killer
🤘
🙇
yaris_trdpuerto rico · Jul 29, 2010#14Hi the photos are good etimago forgive me ask you what you have in your radiator hose that also look like cylinders next to the intake manifold ???
nazierPretoria, south africa · Jul 30, 2010#15WTF are u doing, like i said a mag can make or break a look of a car, and those mags need to go, and the rear left door thats not the same color, and the bumpers, if u dont want to look after the car pass it on to those who will, the engine come out really nice, where is the original cover, and where is the cool oil cap gone,
just put everything back the way it was, ok
thanks,
eTiMaGoThread starterBangkok, Thailand · Jul 30, 2010#16 Originally Posted by
aucorium ↑ YAY !!! the cabby is back and going strong , love the new Regmasters man !!! still looks good as ever , i bet the car is pulling better now aswell ? now to set those coilovers a few mm lower :-)
Oh yeah, it's definitely been a performance mod too 😆
Originally Posted by
tca4 ↑ Looks very nice!! love the red black combo as well
Yep, that's what I am aiming for now...
Originally Posted by
HTM Yaris ↑ Killer
🤘
🙇
Thank you sir 🙂
Originally Posted by
yaris_trd ↑ Hi the photos are good etimago forgive me ask you what you have in your radiator hose that also look like cylinders next to the intake manifold ???
that's a metal tube into which the sensor for my water temperature gauge is installed
Originally Posted by
nazier ↑ WTF are u doing, like i said a mag can make or break a look of a car, and those mags need to go, and the rear left door thats not the same color, and the bumpers, if u dont want to look after the car pass it on to those who will, the engine come out really nice, where is the original cover, and where is the cool oil cap gone,
just put everything back the way it was, ok
thanks,
Honestly I'm more interested in go than show now (of course, car's still gotta look good, but it's not a priority). So if you don't like the wheels, too bad, I do 😁 As for the paint, it's mis-matched from the factory (between the metal and plastic body parts) and then again from the body shop after I had an accident a couple years back. Honestly, the photo makes it more visible than it really is. But, I'm gathering up bumps and scratches, hopefully I may take it for a complete paintjob soon.
Original boring engine cover's in storage somewhere, and I never had a fancy oil cap, confusing me with someone else maybe? 😆
big loLoiza,Puerto Rico · Jul 30, 2010#17Yo E, no matter what the ride is still tight.
tomatoSan Francisco Bay Area · Jul 30, 2010#18 Originally Posted by
big lo ↑ Yo E, no matter what the ride is still tight.
+1
33OHDover, Ohio · Jul 30, 2010#19Looks awesome as always Thomas. I like the black wheels better, personally. 😎
DeathBeardLos Angeles, CA · Jul 30, 2010#20man that's so nice, wish we had that model here
yrsdrgnSF,CA · Aug 12, 2010#21i like how they say Evo on them HAHA. Looks "cute" Thomas! AHAHAHAHAAHAHAH
makes me miss my yaris now...thanks a lot
kacWest/Central Illinois · Aug 12, 2010#22Beautiful.
eTiMaGoThread starterBangkok, Thailand · Aug 12, 2010#23 Originally Posted by
yrsdrgn ↑ i like how they say Evo on them HAHA. Looks "cute" Thomas! AHAHAHAHAAHAHAH
makes me miss my yaris now...thanks a lot
because the oft-copied design of these wheels is originally the Regamaster Evo... ;)
brg88txSE Texas · Aug 12, 2010#24your liftback looks good, ever thought about a red stripe on the outer edge of your wheels?
nazierPretoria, south africa · Aug 13, 2010#25 Originally Posted by
eTiMaGo ↑ Oh yeah, it's definitely been a performance mod too 😆
Yep, that's what I am aiming for now...
Thank you sir 🙂
that's a metal tube into which the sensor for my water temperature gauge is installed
Honestly I'm more interested in go than show now (of course, car's still gotta look good, but it's not a priority). So if you don't like the wheels, too bad, I do 😁 As for the paint, it's mis-matched from the factory (between the metal and plastic body parts) and then again from the body shop after I had an accident a couple years back. Honestly, the photo makes it more visible than it really is. But, I'm gathering up bumps and scratches, hopefully I may take it for a complete paintjob soon.
Original boring engine cover's in storage somewhere, and I never had a fancy oil cap, confusing me with someone else maybe? 😆
hi buddy
just to let u know, if u can find out the factory only does a miss match when the vehicle , was in a bumper bashing in the factory, the factory doesnt redo the work they send it out to get it done, also the should not be a miss match even if its on plastic,
as for more power i will find out once this is done someone down the road from me is fitting the rsi runx motor in his yari, he wants a coffen on four wheels,
a complete respray will be great, are u going to a toyota approved, or someone good your know,
did u try hot ice in the air box it works well, but it will only be for a short time,
did u try a spark plug from bosch four points its also helps with increasing power,
did u think about fitting nos to your air box,
how much wieght did u remove from the vehicle
u can change the rear window to perspex to reduce wieght and all your quarter glass,
did u try fitting flexi pipe from the front bumper to the air box
and to the engine to keep it cooler
eTiMaGoThread starterBangkok, Thailand · Aug 13, 2010#26 Originally Posted by
nazier ↑ hi buddy
just to let u know, if u can find out the factory only does a miss match when the vehicle , was in a bumper bashing in the factory, the factory doesnt redo the work they send it out to get it done, also the should not be a miss match even if its on plastic,
as for more power i will find out once this is done someone down the road from me is fitting the rsi runx motor in his yari, he wants a coffen on four wheels,
a complete respray will be great, are u going to a toyota approved, or someone good your know,
did u try hot ice in the air box it works well, but it will only be for a short time,
did u try a spark plug from bosch four points its also helps with increasing power,
did u think about fitting nos to your air box,
how much wieght did u remove from the vehicle
u can change the rear window to perspex to reduce wieght and all your quarter glass,
did u try fitting flexi pipe from the front bumper to the air box
and to the engine to keep it cooler
I've thought of most of these, but lack of funds right now is holding me back... wait til business gets better and I'll give the car the care that it deserves :)