Ranger SVOOriginal postAbilene · Jul 11, 2010#1One of the biggest advantages of having summers off, is that I can pursue my hobbies.
I started working on the subwoofer box for my Yaris. Here is what I have so far
Picture not included in this copy
Picture not included in this copy
Now this box is small, but the woofer manufacturer swears it will work. This box is (outside dimensions) small, it measures 15-inches long by 12-1/4-inches wide and 5-1/4-inches tall. I'll order the woofer tomorrow.
I still don't know how I wanna finish it. I'm thinking VHT Wrinkle Coat, but I would like to hear some suggestions.
Replies 21
swiddCentral Alabama, GOD BLESS AMERICA · Jul 11, 2010#2Is it designed to fit beneath the spare wheel cargo compartment cover, in its place?
Ranger SVOThread starterAbilene · Jul 11, 2010#3 Originally Posted by
swidd ↑ Is it designed to fit beneath the spare wheel cargo compartment cover, in its place?
I didn't think about that. I'm gonna have to see if it will fit in there. I didn't have to double layer the top and bottom. That would have made it only 3-3/4-inches tall. I could knock out another box pretty quick if I need to. Hmmm
I was just going to put it in the back of the car and put a small amp somewhere out of the way.
I don't have to be back at work until August 17th, I still have time
swiddCentral Alabama, GOD BLESS AMERICA · Jul 11, 2010#4I bought a $30 box at walmart, and put it behind the passenger seat, on top of a folded down split rear seat. I like it, it doesn't take up space.
Ranger SVOThread starterAbilene · Jul 11, 2010#5I have access to a reasonably well equipped woodshop. So I would rather build it myself.
Still thinking about how I wanna finish it.
talnlnkySpokane, Wa · Jul 12, 2010#6Duplicolor bed liner spray. 2-3 coats of that and you will have a fairly durable, scratch/ chip resistant (not proof) finish. Its what I do when I can't afford to have Line-X spray my boxes with the real stuff.
Good construction... It's always nice to see somebody make a good quality box... 1.5" baffle FTW! I'm a bit skeptical about the tuning tho. That box can't be much more than .8cubes... 1cube at the most...(too lazy right now to figure it out). Port is a few inches long, but there is a flare which increases the tuning, and there is a lot of port area... I'd be surprised if that box is tuned below 50hz.
What sub?
derickveliz2Central, MA · Jul 12, 2010#7Looks very interesting, yes I'm curios about the sub too (and the company).
Good job!
RedHatch08Detroit MI USA · Jul 12, 2010#8 Originally Posted by
talnlnky ↑ Duplicolor bed liner spray. 2-3 coats of that and you will have a fairly durable, scratch/ chip resistant (not proof) finish. Its what I do when I can't afford to have Line-X spray my boxes with the real stuff.
Good construction... It's always nice to see somebody make a good quality box... 1.5" baffle FTW! I'm a bit skeptical about the tuning tho. That box can't be much more than .8cubes... 1cube at the most...(too lazy right now to figure it out). Port is a few inches long, but there is a flare which increases the tuning, and there is a lot of port area... I'd be surprised if that box is tuned below 50hz.
What sub?
I was thinking the same thing.
firemachine69Sudbury, On · Jul 12, 2010#9Anyone ever use the structure of the rear seat to mount a sub? To save valuable rear hatch space, etc?
Ranger SVOThread starterAbilene · Jul 12, 2010#10The woofer is an Earthquake SWS-10. It was ordered today and I should have it by Friday. Also, this is Not a port. Earthquake calls it a Horn Load. The only question I have (and I emailed Earthquake Techsupport) is "will this really work". They assured me it would.
Here is a link to the .pdf directions for the SWS woofer.
http://www.earthquakesound.com/IMAGE...sws_manual.pdf 1. My box is 3/4-inch not 5/8 like in the directions
2. Both the baffle and the bottom is 1-1/2-inches thick
3. My box has slightly more internal volume than the directions. (I did email Tech Support before I built it)
I did do some research on the net about this type of design. I have found that horn loads are used mainly for concert type performances, where filling huge areas with sound is a must. However, I am unable to find any mathmatical models for a box this small, so I have no way of simulating the performance of this design.
I will know next weekend whether I like it or not.
Duplicolor BedLiner, good idea, Thanks
sqcompBack at home · Jul 12, 2010#11Talnlnky should be able to lend some insight to the enclosure...
Ranger SVOThread starterAbilene · Jul 16, 2010#12The woofer came in today and I decided that I still have more work to do.
Picture not included in this copy
Picture not included in this copy
I will need to router the woofer mounting area so that the woofer will mount flush. I really don't like this "laying on top of the box" look. So, I'm still a few days out on finishing.
RedHatch08Detroit MI USA · Jul 16, 2010#13Well at least it looks loud.
Alien MantisArizona · Jul 16, 2010#14I agree, sink that puppy flush.
You should carpet that box, but that's just me. I'm old-skool like that.
😁
Those subs have a long advertised stroke. Let us know how it sounds.
Ranger SVOThread starterAbilene · Jul 16, 2010#15 Originally Posted by
RedHatch08 ↑ Well at least it looks loud.
It does look loud, but I'm not about loud. I just want to improve the overall sound in the Yaris. But don't get me wrong, loud would be a major plus.
Not sure what I was thinking, when I went to the shop (its a car audio shop) to pick up my woofer, I could have taken my box. I could have hooked it to their demo board and checked it out.
Monday or Tuesday, I'll run by the shop (they let me have access to their woodworking equipment), router the box and test it to see how it works.
talnlnkySpokane, Wa · Jul 18, 2010#16hmm... i'll look at the PDF later... As far as the horn load... Ok, I can see that, I though you were just trying to have a flared port design. Horn Loaded woofers like you said usually you want to follow a formula to determine the length and rate of expansion for the intended frequency response.
AFAIK horn size is mostly effected by frequency desired, tho there also might be minimum neck openings for given sizes of speakers (to make sure you don't get wierd chuffing/port noise type sounds.
I once made a horn loaded 15" sub from a design that was supposed to play down to 30hz. The sealed chamber for the 15" was dinky, probably about 1.5cuft (the sub normally would be in about a 2.5-5cuft sealed box). The horn however wrapped around that sealed chamber, and the final dimensions of the box were about equivalent to a 10cuft box.
I'd think that the horn on that box would reinforce some fairly high notes... but who knows.... it may work well. There are a millions variables in acoustics. Things don't always work like you'd think they should. I once made a giant cylindrical Home Theater sub using a 15" sub and 18" & 8" sonotube. The design was supposed to be ported 7.5cuft @ 16hz. Due to the size of my port (I had a huge port area)... I think in actuality I ended up with something inbetween a transmission line & a ported box.
custom LftbackHouston, TX · Jul 18, 2010#17as far as finishing it, here is an idea....i wrapped my box in the Neffy Carbon Fiber fabric that Garm sells. it looks real clean.
Ranger SVOThread starterAbilene · Jul 18, 2010#18 Originally Posted by
talnlnky ↑ I'd think that the horn on that box would reinforce some fairly high notes... but who knows.... it may work well. There are a millions variables in acoustics. Things don't always work like you'd think they should. .
Well, Earthquake says it should work. But I'm like you, I wanna hear it. If it doesn't sound the way I want it to, I can knock out a ported box pretty quick.
I still have plenty of time (I'm a math teacher, I don't go back to work until August 17th)
Ranger SVOThread starterAbilene · Jul 22, 2010#19 Originally Posted by
Ranger SVO ↑ Well, Earthquake says it should work. But I'm like you, I wanna hear it.
And I'm not that impressed. On a scale of 1-10, I give it a 5 or 6. Thats not good enough to go in my Yaris. The horn needs to be positioned properly to work well and I want it in a specific spot.
I'm gonna build another box next week. I may go sealed. When we completely blocked the horn opening the performance got better, much better. I still don't wanna take up a lot of room and this woofer will work in a super small enclosure.
talnlnkySpokane, Wa · Jul 23, 2010#20do you know the TS specs on that sub? if so... what are the Qts, Vas, and Fs of that sub?
toy_torontoTarrana, Canada · Jul 23, 2010#21 Originally Posted by
Ranger SVO ↑ And I'm not that impressed. On a scale of 1-10, I give it a 5 or 6. Thats not good enough to go in my Yaris. The horn needs to be positioned properly to work well and I want it in a specific spot.
I'm gonna build another box next week. I may go sealed. When we completely blocked the horn opening the performance got better, much better. I still don't wanna take up a lot of room and this woofer will work in a super small enclosure.
well that sux.
.
Ranger SVOThread starterAbilene · Jul 23, 2010#22I decided not to wait until next week. So I went to the shop around 1:30 and by 4:00, I had a box. I still have a lot of work to do but it sounds much better than the Horn load Box. Its internal volume is 0.45 cu ft and the woofer really likes this size. This box willl be a
downfire box
Picture not included in this copyPicture not included in this copy Picture not included in this copyPicture not included in this copy I am a definate believer in lots of glue and screws.
Picture not included in this copyPicture not included in this copy I still have a lot of work to do, I could not find the rounded corner router blade for example. But we did check the box in a Toyota Sienna (owned by one of the shops emplyees) and it did pretty well.
Originally Posted by
talnlnky ↑ do you know the TS specs on that sub? if so... what are the Qts, Vas, and Fs of that sub?
Vas (liters) 51.48 Fs 28.45 Qts 0.46
Using Vance Dickasons method for determining the best type of enclosure, we divide
Fs/Qes and get
EBP. EPB numbers around 50 or less indicates a seal box. In my case 28.45/ 0.51 = 55.78. We need a sealed box.