DED1982Original postGeorgia · Jul 10, 2010#1***PENDING SALE ON STEERING WHEEL... WILL UPDATE AFTER SALE*** Direct fit into our beloved Yarii. I'm getting out of the Toyota game though, and heading back to old school VWs.
Picture not included in this copy Picture not included in this copy Bought new, used for 1.5 years. Leather is gorgeous and feels so good to drive with. These should have come stock. Perfect match for the dash and silver center stack. Airbag not included. Plug and play OEM+ mod!
$150 plus shipping
Email ded1982@windstream.net or text/call me (478) 297-9969 - Doug Also, if you're local, I'd be glad to meet halfway (anywhere in Georgia), in that case there would be no shipping
Replies 15
auxmikeLI, New Yawk · Jul 11, 2010#2Stick with Toyota, the VWs tend to spend lots of time in the shop. Nice wheel, BTW....
bizzlebabyVirginia · Jul 12, 2010#3Pm sent
DED1982Thread starterGeorgia · Jul 12, 2010#4PM replied!
pennyracergrants pass · Jul 19, 2010#5did you get the deal done ?
pennyracergrants pass · Jul 20, 2010#6hi im looking for info on what year scions will the steering wheel swap directly to a 08 yaris liftback any one have this info please advise
bzinn 1University Place,WA · Jul 20, 2010#7scion tC wheel will fit directly.....all years 05-10 same wheel on the tC.....first gen xB and xA wheels will not fit
sleey0PA · Jul 21, 2010#8Found the part.
Now, how did you get the wheel off of the car?
CTScottUSA, CT · Jul 21, 2010#9I apologize to the OP for the thread jacking, but to answer the questions:
TC steering wheels fit, but the "notch" on the back of the wheel is different. The Yaris steering wheel has a an opening, where the Scion one has a bar. This prevents you from being able to perfectly center the steering wheel on the clock spring. I bought a TC steering wheel with the cruise stalk attached off ebay (for far less than a cruise stalk), so I did some experimenting with the TC steering wheel, as it is a nice leather one.
Yaris Steering Wheel:
Picture not included in this copy Scion TC Steering Whel:
Picture not included in this copy Yaris Clockspring (note the two tabs that the grooves in the steering wheel center on):
Picture not included in this copy Here's a video that I put together to show someone how to remove the clock spring, which also shows removing the steering wheel.
http://www.youtube.com/watch?v=LgWSzVeILhc3 attachments not included in this copy
pennyracergrants pass · Jul 21, 2010#10thanks for the heads up this helps alot you really know your stuff CTScott this is what makes this site so helpfull so does the binker shut off when the wheel retuns to the center position after a turn if thats what your mean by it not centering completly ? thanks again bud i want t tc leather wheel just want it work right the first time i install it
CTScottUSA, CT · Jul 21, 2010#11 Originally Posted by
pennyracer ↑ thanks for the heads up this helps alot you really know your stuff CTScott this is what makes this site so helpfull so does the binker shut off when the wheel retuns to the center position after a turn if thats what your mean by it not centering completly ? thanks again bud i want t tc leather wheel just want it work right the first time i install it
Good questions - After eating lunch, I just mounted the TC one to Crashy. When I tried it before, I had the clockspring taped so that it would not rotate, so in order to slide the steering wheel on I had to cock it a few degrees.
This time I left the clockspring free and rotated it, instead of the wheel. Doing so allows the wheel to go on straight, and shouldn't affect the clockspring's operation, as it is designed to allow for 5 revolutions (so, ~5 degrees out of 1800 is fairly negligible). The turn signal return worked fine in both directions.
Here are some pics:
TC steering wheel mounted on Crashy:
Picture not included in this copy Closeup of clockspring rotation required to put steering wheel on straight:
Picture not included in this copy Airbag on - Not that the fit isn't quite as nice as the xB/xD wheel above:
Picture not included in this copy3 attachments not included in this copy
cali yarisCanoga Park, CA · Jul 21, 2010#12you have an airbag on Crashy?
CTScottUSA, CT · Jul 21, 2010#13 Originally Posted by
cali yaris ↑ you have an airbag on Crashy?
Not any more. If you look closely you'll see the seams, where I glued the airbag cover back together.
pennyracergrants pass · Jul 22, 2010#14so now that is solved thanks again ctscott looks like the scion air bag has a much better look then putting on yairs air bag on scion wheel wonder if the air bags plug in the same way ? sorry for all the questions but i have another one whats the best winshield wiper controll swith to replace the yaris switch to gain more rear window wiper controll settings found one off a lexus 05 wonder if it will work number on the lexus switch is 17a082-lh
CTScottUSA, CT · Jul 22, 2010#15 Originally Posted by
pennyracer ↑ so now that is solved thanks again ctscott looks like the scion air bag has a much better look then putting on yairs air bag on scion wheel wonder if the air bags plug in the same way ? sorry for all the questions but i have another one whats the best winshield wiper controll swith to replace the yaris switch to gain more rear window wiper controll settings found one off a lexus 05 wonder if it will work number on the lexus switch is 17a082-lh
From what I've seen the 2008+ Scion airbags have the same connectors as the Yaris airbag (and they have the dual squibs, unlike the Japanese Vitz airbags, which just have one squib).
For the Wiper stalk check out my DIY for part numbers. The place in the thread where I bought my Prius stalk from typically has them available. The part number that you posted is not a correct number, as it should have 10 digits.
DIY - Liftback Intermittent Wipers via Stalk Replacement (v2.0) MUSKOKA800Chatham, Ontario, Canada · Jul 30, 2010#16Thanks DED1982.
Canada Post delivered today. The wheel was well packed and in pristine condition.
And thanks also to CTScott for the tutorial.
It'll help greatly with the installation.