Yarisworld Archive

going LED

24 posts · 9,241 views

QmobileOriginal postHoytville, ohio · Jul 7, 2010#1
after looking at the sticky about this I'm still confused what sizes I need for lights. I wanna change most(if not all) of my lights to LED. Here's what I've understood so far, correct me if I'm wrong:

Dome light: 30022 (32mm)
Truck/cargo: 3610(36mm)
Rear turn: 7507A
tail/break:7443

remember I got the hatch also. I'd like to at least do those light in LED and the reverse and l-plate lights too. My plan (for the tails) is to first do the stockers then do the TYC tails I got. Now you may be asking yourself "why both sets?" or "Why at all?" well.......LEDs are cooler, brighter and take up less power. And I wanna do both sets so if something happens to one of I'll have a back up.

Replies 23

Focus_Sh1ftNew Jersey · Jul 7, 2010#2
That thread definitely has some faulty info. Turns out the map lights and license plate illumination lights are the same (for the sedan atleast). That sticky has the illumination lights listed as the same as dome ones... and they're most certainly not. 🙄
QmobileThread starterHoytville, ohio · Jul 7, 2010#3
hmm a dealer should have all this info too right? I mite have to stop by sometime. Good thing I 'm in good terms with my dealer's part dept
derickveliz2Central, MA · Jul 7, 2010#4
Can you read this?

Picture not included in this copy


and/or use this LINK

I have LEDs all around but turn signals and revers

.
thebarberGrand Rapids, MI · Jul 7, 2010#5
you need wedge for the map, a 36mm festoon for the hatch and a 31mm festoon for the dome...sedans use a wedge for the trunk

i have some for sale in my FS post in the classifieds....PM'd you
QmobileThread starterHoytville, ohio · Jul 7, 2010#6
Originally Posted by derickveliz2 ↑
Can you read this?

Picture not included in this copy


and/or use this LINK

I have LEDs all around but turn signals and revers

.
just barely can read it
QmobileThread starterHoytville, ohio · Jul 7, 2010#7
is that list for regulay bulbs or LEDs? maybe I'm thinkin wrong I'm wantin to change to something brighter, take less power to run and is direct replacement. I epsaclly want bright for the clear tails
AstromanWenatchee, WA · Jul 7, 2010#8
I changed my lic. plate light because I didn't want to risk getting pulled over when the OEM bulb burnt out. Although I may replace it because it only has 1 LED and isn't very bright. Legal, but not that bright.
QmobileThread starterHoytville, ohio · Jul 7, 2010#9
but am I thinkin in the right direction? I seen not too long ago direct replacement LED bulb or whatever u wanna call it in red
Kaotic LazagnaCentral Valley, CA · Jul 7, 2010#10
Originally Posted by Qmobile ↑
is that list for regulay bulbs or LEDs?
Both.
QmobileThread starterHoytville, ohio · Jul 7, 2010#11
ok....noted
DamoPerth, Western Australia · Jul 8, 2010#12
Originally Posted by Qmobile ↑
just barely can read it

Hold down CTRL and scroll your mouse wheel :)
firemachine69Sudbury, On · Jul 8, 2010#13
Keep in mind, that electrical gremlins likely will pop up if you convert entirely to LED, as the amperage draw is infinitely smaller than standard incandescent bulbs.
sickpuppy1Kansas · Jul 8, 2010#14
What kind of gremlins?
QmobileThread starterHoytville, ohio · Jul 8, 2010#15
Originally Posted by sickpuppy1 ↑
What kind of gremlins?
yes! please tell me....err us about these gremlins you speak of.
goliath1812Ocala Florida · Jul 8, 2010#16
Originally Posted by thebarber ↑
you need wedge for the map, a 36mm festoon for the hatch and a 31mm festoon for the dome...sedans use a wedge for the trunk

i have some for sale in my FS post in the classifieds....PM'd you

I picked up a set from thebarber a while ago, they look great.
QmobileThread starterHoytville, ohio · Jul 10, 2010#17
ok here's what I just found out! I looked at the sockets for the bulbs in the TYC tails, and found some numbers. maybe bulb sizes or it the part # for the actual housings? Anyway here:

Break-f115
Turn-f116
Reverse-f58

And idk if the stock tails have this but with these there's a extra bulb that faces to the side of the car(when installed) witch had no number or anything. So what are these numbers that I found?
QmobileThread starterHoytville, ohio · Jul 14, 2010#18
bump!
kacWest/Central Illinois · Jul 15, 2010#19
Going LED was one of the best mods I've done to my car. I enjoy it every single day. Got ALL my LED's on eBay.
QmobileThread starterHoytville, ohio · Jul 16, 2010#20
ok details man details DETAILS!!!!!!
derickveliz2Central, MA · Jul 16, 2010#21
.
Tail lights:
Picture not included in this copy
LINK


License Plate and Trunk:
Picture not included in this copy
LINK


Map Lights:
Picture not included in this copy
LINK


Dome Lights
2 of this in natural white...
Picture not included in this copy
LINK



Rear turn signals:
Picture not included in this copy
LINK



Head Lights and Fog Lights

HID 5000k and 3000K (fog lights)

Picture not included in this copy

I hope it helps!

.
QmobileThread starterHoytville, ohio · Jul 16, 2010#22
yep very much so......
firemachine69Sudbury, On · Jul 16, 2010#23
Originally Posted by Qmobile ↑
yes! please tell me....err us about these gremlins you speak of.


You or may not get 'odd behaviour' with your electricals.
QmobileThread starterHoytville, ohio · Jul 30, 2010#24
ok so...I was lookin the other day and found these bulbs that look bout like the same as the front turn signal but it's clear......wonder if that would work? looks to be the exact same bulb but a slightly different part #