ViozOriginal postLong Island, NY · Jul 6, 2010#1I just changed my belt because i noticed my belt was starting to rip up, on one side of the belt there was a nice long piece missing so it looked as if it was hanging on for dear life, thank god i noticed it doing an oil change.
Anyways, not sure how many miles you are suppose to change your belt, i hit 66k miles with my yaris and this was the first time i had to change it?
if its suppose to be every 100K miles of some sort do you think the NST pulleys have something to do with it?
Also my NST water pump pulley has a nice groove in it from the belt, should i replace it with a new pulley, not sure what is the average life on the water pump pulley but it looks like theres not much that pulley can take?
Replies 22
127.0.0.1NE · Jul 6, 2010#2 Originally Posted by
Vioz ↑ I just changed my belt because i noticed my belt was starting to rip up, on one side of the belt there was a nice long piece missing so it looked as if it was hanging on for dear life, thank god i noticed it doing an oil change.
Anyways, not sure how many miles you are suppose to change your belt, i hit 66k miles with my yaris and this was the first time i had to change it?
if its suppose to be every 100K miles of some sort do you think the NST pulleys have something to do with it?
Also my NST water pump pulley has a nice groove in it from the belt, should i replace it with a new pulley, not sure what is the average life on the water pump pulley but it looks like theres not much that pulley can take?
belts always require visual inspection.
anwhere from 40,000 to 50,000 miles for accessory belts is normal. replace if older than 50,000 miles.
ViozThread starterLong Island, NY · Jul 6, 2010#3 Originally Posted by
127.0.0.1 ↑ belts always require visual inspection.
anwhere from 40,000 to 50,000 miles for accessory belts is normal. replace if older than 50,000 miles.
yea so it was time then haha. I'm glad I noticed it really would've sucked if it failed on me in the middle of no where, I deffinatley felt a difference actually after replacing it guess I was losing some power and such.
AstromanWenatchee, WA · Jul 6, 2010#4I replaced mine when my mechanic noticed a small gouge in it at just over 81k miles. Guess I got my $ worth out of the original belt.
ViozThread starterLong Island, NY · Jul 6, 2010#5What about the NST water pump pulley when should i replace that, I'm not sure what may happen if it fails on me because it is so worn out
cali yarisCanoga Park, CA · Jul 6, 2010#6^ hard to say without seeing some pictures!
1NZYaris1New Zealand · Jul 6, 2010#7Your water pump pullie should be fine , the little grooves are from road grime landing on the outside of the belt
it's nothing major. 👍
It's more cosmetic than anything 😎
ViozThread starterLong Island, NY · Jul 6, 2010#8 Originally Posted by
1NZYaris1 ↑ Your water pump pullie should be fine , the little grooves are from road grime landing on the outside of the belt
it's nothing major. 👍
It's more cosmetic than anything 😎
I dont know it looks too perfect for it to be from the road and looks too deep i say its about a perfect .5 cm maybe a little less (estimate) it has made a perfect dig in lol I will take pictures one i get out of work
AstromanWenatchee, WA · Jul 6, 2010#9Are you sure you don't mean .5mm? I don't think the pulley is even .5cm thick. Mine has worn most of the iodized coloring off and has light grooves, but is less worn that my stock pulley was when I got that heavy POS off.
ViozThread starterLong Island, NY · Jul 7, 2010#10lol i have the pictures on my phone but i forgot to bring the cord from work to plug it into my computer....FAIL. Anyways I think I put about 35k miles on the pullies, how many miles you got on your astro?
AstromanWenatchee, WA · Jul 7, 2010#1153k so far. I'll take pics of mine to compare. I just replaced my original belt 2k miles ago @ 81k
ViozThread starterLong Island, NY · Jul 7, 2010#12alright so my mind is a little eased after that, i'll check the pictures out
ViozThread starterLong Island, NY · Jul 7, 2010#13LOL okay its not really .5 cm, its like .015cm or 1.5 mm or something close to there
Alright here are 3 pictures
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
AstromanWenatchee, WA · Jul 7, 2010#14Um WOW! Sure you weren't running a sanding belt or something on your pulley?? lol. Who did the install? Mine isn't anywhere NEAR that wore... I'll go take some pics now for you.
AstromanWenatchee, WA · Jul 7, 2010#15Here's mine. Some grooved wear, but NOTHING like what you have.
1 attachment not included in this copy
ViozThread starterLong Island, NY · Jul 7, 2010#16i knew it, i deffinatley need to replace it. The belt was squeeking whenever it was wet during winter so i tightened the belt a little. Probably thats what did it :(
Damn you even still have some red left on yours lol
AstromanWenatchee, WA · Jul 7, 2010#17Yeah at this rate I'm figuring I'll be good at least another 550k miles, lol. You should show those pics to Mike over at NST and explain to him what happened, and why you think it did. If anything he should at least be aware of what could happen. Glad your not blaming NST for their product as others have done, way to take the high road! 👏
Might be a good idea to pull that pulley off and put the OEM back on for now.
ViozThread starterLong Island, NY · Jul 7, 2010#18Yea doing it tomorrow, I tried to do it before but I was going to leave it for another day, I need to do it tomorrow because friday i'm driving to PA for vacation don't need my car breaking down on my on the way haha.
But no I love NST products, I never blame anyone but myself really, if something fails on me on my car I feel like it's because I didn't install it right or something, I never have a shop do work on my car unless I really need to have them do it.
Except these pullies lol I did the crank myself (note all this stuff I'm doing is completely first time experience for me) and then i had to take it to a shop for my waterpump and alt. pulley.
I'll send pics to mike tho.
I felt like the belt was too tight after a bit, I check it every time a do an oil change, a guy at a shop said to me if you can bend the belt 90 degrees from where it is now, then its tight enough, is that true?
ViozThread starterLong Island, NY · Jul 7, 2010#19LOL I just im'ed mike, hes stunned I should get a reward or something :D
ViozThread starterLong Island, NY · Jul 7, 2010#20Spoke to mike from NST and everything is going to work out perfectly fine.
I IM'ed him "NSTonAIM" (without the quotes). Because I went on their website
http://www.nonstoptuning.com/ and went to their contact us page.
Not that hard to get in touch with them, can't always expect them to roam these forums 24/7 :D
Anyways to the big point here, I'm sending him my messed up NST WP pulley along with my tore up belt for inspection and hes sending me a replacement free of charge due to it being under their warranty on the pulley set, that is already included when you buy it.
Can't wait now :D
Red HorseCosta mesa, California · Jul 7, 2010#21So the NST pulleys are lifetime waranty? COOL
ViozThread starterLong Island, NY · Jul 7, 2010#22I didn't even know there was a warranty until I contacted mike the right way:D
goliath1812Ocala Florida · Jul 8, 2010#23props to NST. looks like i will be buying more pulleys from them after all :P