darkmoon87Original postVancouver, BC · Jun 30, 2010#1Well, it just happened tonight. When I got out and started the car, the headlights decide to not work.
I fiddled with it for a minute and discovered that high-beam is actually working normally. That means that the bulb is fine, right? As far as my knowledge goes, yaris uses a single pair of bulbs for both low & high beam.
So that being said, it's not the dead bulb. Had it been the bulbs, it would've been much easier I guess since I just have to go buy a new pair and stick it in. But in this case I don't know what the problem is.
Electrical-wise, everything is working fine. There is not a single problem what so ever. Can it be a blown fuse or something like that?
Please help
Replies 24
matanfrIsrael · Jun 30, 2010#2if the high-beams are working and the normal aren't,it can be a bad relay or a damaged fuse.perhaps even the connectors inside the handle you use to switch the lights to "normal" or "high" are damaged.
also,try another thing:leave the car operating on neutral and stationary ,and open the door while the lights are on "high". have you heard a beep of the warning system? if it's beeping, transfer the knob to "normal" and see what happens.i think this might give us a proper direction on how to solve this.
BluYrsTallinn, Estonia · Jun 30, 2010#3H4 bulbs have dual filaments, so it's possible that the low-beam ones are just blown (although, what are the odds...).
matanfrIsrael · Jun 30, 2010#4 Originally Posted by
BluYrs ↑ H4 bulbs have dual filaments, so it's possible that the low-beam ones are just blown (although, what are the odds...).
on
both of the headlights? the "normal" beam isn't working..if it was blown,he could see the lights are working on the other headlight..
BrianRiverside, CA · Jun 30, 2010#5Your bulbs need to be replaced. Same thing happened to me when mine went out. Get some new ones and you'll be fine.
CTScottUSA, CT · Jun 30, 2010#6If you've done any recent work that involved the headlight stalk connector (like installing fogs), then check the connector. If wiggling the connector makes the low beams flicker, then you have a pin that is loose on the connector. After taking mine on and off many times, this happened to me. By wiggling individual wires on the connector I found the culprit, and then pulled the pin and reshaped it, so that it would make better contact.
127.0.0.1NE · Jun 30, 2010#7crap aftermarket bulbs like silverstar or (insert any fancy overpriced bulb here) tend to
blow early (1 year) and within a week of each other.
are they some aftermarket brand in fancy packaging that touts 'better visibility' or 'wicked color temperature' ?
auxmikeLI, New Yawk · Jun 30, 2010#8Change both bulbs. Try using the Osram brand. Made in GERMANY!👍
thebarberGrand Rapids, MI · Jun 30, 2010#9time for HID's
thebarberGrand Rapids, MI · Jun 30, 2010#10 Originally Posted by PK198105 ↑
will they burn my harness?
lol, no. ive been running 35w hid's in my yaris for well over a year in ALL weather conditions and its fine. i run 35w bixenon H4 hid's in the aveo as DRL's as well without incedent. hid kits pull less power than halogen bulbs once they're on
big loLoiza,Puerto Rico · Jun 30, 2010#11I have to agree with thebarber, HIDs are better in quality and you get a better visual of the road. And no they dont eat or melt the stock plugs, this happens with aftermarket bulbs that need a harness so it doesnt melt your excisting plug. So go out and buy some HIDs, and go to Microimageonline.com to purchase them. Oh I forgot to mention they last longer than regular bulbs. Do the right thing for your car. HIDs.
darkmoon87Thread starterVancouver, BC · Jun 30, 2010#12hm, thanks for all the replies.
as some of u pointed out, yes i was using aftermarket headlight bulbs and yes it's been almost a year.
i guess i will try putting the oem bulbs back in and see if that solves the problem. then i will go from there
i will keep u guys updated. cheers
Yaris HiltonBristol, Tennessee, USA · Jun 30, 2010#13You do know that changing to HIDs isn't just a matter of plugging in a different bulb?
I hate to see those things, personally.
darkmoon87Thread starterVancouver, BC · Jun 30, 2010#14 Originally Posted by
Yaris Hilton ↑ You do know that changing to HIDs isn't just a matter of plugging in a different bulb?
I hate to see those things, personally.
thanks for pointing it out, but i dont have HIDs :)
127.0.0.1NE · Jun 30, 2010#15 Originally Posted by
darkmoon87 ↑ hm, thanks for all the replies.
as some of u pointed out, yes i was using aftermarket headlight bulbs and yes it's been almost a year.
i guess i will try putting the oem bulbs back in and see if that solves the problem. then i will go from there
i will keep u guys updated. cheers
yeah the deal with aftermarket 'high zoot' bulbs are, they do provide
a higher color temperature, as the expense of filament life
thebarberGrand Rapids, MI · Jun 30, 2010#16 Originally Posted by
Yaris Hilton ↑ You do know that changing to HIDs isn't just a matter of plugging in a different bulb?
I hate to see those things, personally.
thats correct, but it's far from rocket science.
big loLoiza,Puerto Rico · Jun 30, 2010#17 Originally Posted by
Yaris Hilton ↑ You do know that changing to HIDs isn't just a matter of plugging in a different bulb?
I hate to see those things, personally.
And why is that? HIDs are like a small amp for the lights, yes they discharge more light, but it is at a level that is controled, by the ballast. But that is you opinion, not for everybody sure, but to some of us its the best thing to have especialy when you have your ride deck out and pretty looking. I luv em, and when you drive at night it keeps things clear, like debre and such, drive safe is what is all about. Holla at your boy.
Yaris HiltonBristol, Tennessee, USA · Jun 30, 2010#18I'm sure they're fine to drive behind, but they glare and they're dorky looking.
big loLoiza,Puerto Rico · Jun 30, 2010#19 Originally Posted by
Yaris Hilton ↑ I'm sure they're fine to drive behind, but they glare and they're dorky looking.
Well Yaris Hilton, that is your opinion and nobody can differ with that. Holla my dude.
Kaotic LazagnaCentral Valley, CA · Jun 30, 2010#20 Originally Posted by
Yaris Hilton ↑ I'm sure they're fine to drive behind, but they glare and they're dorky looking.
The bolt-on projector ones that Garm sell aren't glary and look badass 😉
big loLoiza,Puerto Rico · Jun 30, 2010#21 Originally Posted by
Kaotic Lazagna ↑ The bolt-on projector ones that Garm sell aren't glary and look badass 😉
I agree with that, and with the projector fogs they complete the set up. Like you said they are BADASS. Cuz I have them too, holla at me.
darkmoon87Thread starterVancouver, BC · Jul 5, 2010#22sorry about late update. i put in the oem bulbs and the low beam works fine. looks like the low beam portion of the aftermarket bulb went (perhaps the filaments? iono)
now both low + high beams are working great
big loLoiza,Puerto Rico · Jul 5, 2010#23Thats good news, DM now when will you get HIDs for the sedan, she will be happy to have new eyes. Believe my dude the last longer than regular bulbs. Holla at me.
arsa54Australia · Nov 28, 2018#24 Originally Posted by
matanfr ↑ if the high-beams are working and the normal aren't,it can be a bad relay or a damaged fuse.perhaps even the connectors inside the handle you use to switch the lights to "normal" or "high" are damaged.
also,try another thing:leave the car operating on neutral and stationary ,and open the door while the lights are on "high". have you heard a beep of the warning system? if it's beeping, transfer the knob to "normal" and see what happens.i think this might give us a proper direction on how to solve this.
I have the same problem as high beam is not working.
Checked door opening beep and it makes sound in high and low beams.
Is there any relay for high beam?
PingolferSurrey BC · Dec 1, 2018#25Any body having any luck with (9003 or H4) LED h/light bulbs for Yaris. My parts store carries Brightsource, but their part number is not necessarily recommended for my 2007 3door hatch, seems they might flicker.