Yarisworld Archive

Started to do my calipers

7 posts · 3,904 views

RHDVIPbBOriginal postLouisville, KY · Jun 26, 2010#1
Well today was a good day. Not too hot and I got an itch to work on the car. Decided to start on my calipers and get them ready for the new wheels.

I started by covering everything up and pulled the lower bolt off to raise it off the rotor.
Picture not included in this copy

Used my favorite tool for cleaning and polishing metal. Not too much brake dust but this did give me a clean surface for the paint.
Picture not included in this copy

Next I used a small piece to get into the small places the grinder missed.
Picture not included in this copy

Then I used a drop cloth to protect my car from any chance of overspray. I tucked it into the fender well to protect the suspension, etc.
Picture not included in this copy

Replies 6

RHDVIPbBThread starterLouisville, KY · Jun 26, 2010#2
This is the stuff I used. Used not even half a can for both the front calipers.
Picture not included in this copy

I did a total of three coats. I waited about 10 minutes between coats like the can said.
Picture not included in this copy

And here is the end result.
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

And how it looks through the steelies
Picture not included in this copy


Now I know the rest isn't done, but I did a small section to see how this stuff works. If I don't have any problems then I will finish the brackets before Import Alliance. Not bad for about 2 hours from start to finish.
YarisSedanCalifornia - Bay Area · Jun 26, 2010#3
I dont trust the spray on type. Its better to use the kind that uses a catalist you mix in the paint to make a strong epoxy. The spray on stuff wears off after awile. It looks good now but in a year or so its gona look bad and your gona have to redo it again anyways.
RHDVIPbBThread starterLouisville, KY · Jun 26, 2010#4
Originally Posted by YarisSedan ↑
I dont trust the spray on type. Its better to use the kind that uses a catalist you mix in the paint to make a strong epoxy. The spray on stuff wears off after awile. It looks good now but in a year or so its gona look bad and your gona have to redo it again anyways.
I agree. But this is temporary until I go with some endless calipesr next year. Just trying to see if I like the blue since thats what the new calipers are colored as.
severous01SE Texas · Jun 27, 2010#5
ya, and you cant clean them with brake cleaner if you spray them. i know...i did it.
husaynkhanmauritius · Oct 18, 2010#6
nice toffff
big loLoiza,Puerto Rico · Oct 18, 2010#7
Waiting to see the wheels bro