Yarisworld Archive

cant find the horizontal adjustment screw for headlight hatchback..

19 posts · 17,085 views

marcusOriginal posttoronto, canada · Jun 23, 2010#1
for the life of me i cant seem to find the vertical adjustment screw for 2007 hatchback headlight to aim it left and right. does it have one..the screw to adjust it up and down is right there but how do we adjust sideways???

i meant horizontal aiming..going left and right..

1 attachment not included in this copy

Replies 18

thebarberGrand Rapids, MI · Jun 23, 2010#2
its the giant plastic thing sticking up on an angle towards the engine, iirc
marcusThread startertoronto, canada · Jun 23, 2010#3
giant plastic thing?.. hmm let me post a photo if i can find one..

i think its horizontal aiming going left and right is what im looking for..

i see something on the manual ..is it possible we dont have left and right aiming? let me check.
WeeYariGeorgetown, Ontario, Canada · Jun 23, 2010#4
left/right is a horizontal adjustment, not vertical
marcusThread startertoronto, canada · Jun 23, 2010#5
yah horizontal is what im looking for i just check and it seems like we only got vertical adj cant find the other screw..maybe ill open it up later...
WeeYariGeorgetown, Ontario, Canada · Jun 23, 2010#6
I've never had need to adjust the lights so I'm not sure about horizontal either. IIRC, this adjustment can be done, but the headlight needs to be removed from the car.

I'm wondering if this is it shown in this pic I just took. This is looking at the passenger side light from across the engine bay.

1 attachment not included in this copy

marcusThread startertoronto, canada · Jun 23, 2010#7
hmmmm i dont remember seing that one.. ill check later...thanks man..i may need to take it off just didnt want to do it and finds out there is no adjustment...just switch to hid and for some reason the left side is aimed more of the left rather than straight..
thebarberGrand Rapids, MI · Jun 23, 2010#8
im not sure you can adjust horizontally

whats the deal w/ your headlights?
marcusThread startertoronto, canada · Jun 23, 2010#9
little off on aim on the left side. maybe its the way it was inserted...i can keep it the wa it is but id rather have it aim perfectly straight..
CTScottUSA, CT · Jun 23, 2010#10
In the diagram below, A is the vertical adjustment and B is the horizontal. The horizontal adjustment is part of the parking light bulb mount.

Picture not included in this copy

1 attachment not included in this copy

marcusThread startertoronto, canada · Jun 23, 2010#11
yah i saw this but i dont seem to have B..............
CTScottUSA, CT · Jun 23, 2010#12
Originally Posted by marcus ↑
yah i saw this but i dont seem to have B..............
From your picture above, I think it is this:

Picture not included in this copy

1 attachment not included in this copy

marcusThread startertoronto, canada · Jun 23, 2010#13
ok i found that piece it could be it but need a long screw driver to adjust but it doesnt seem to have a screw but i could be wrong..
IllusionXBrossard, QC · Jun 24, 2010#14
hmm.. i don;t seem to have found that one on my sedan...
thebarberGrand Rapids, MI · Jun 24, 2010#15
no screw

i was playing with it on my headlights last night...it pulls out like it were a bulb

marcus, id just accept that your reflector headlights w/ HID's in them arent going to be perfectly straight
marcusThread startertoronto, canada · Jun 24, 2010#16
cool good to know.. so we pull then turn to adjust left and right? actually the cutoff was ok little spread around it but i still got the 2 spots shining on the wall when i was adjusting.. that the reason i went with bixenon cos those came with shields on them..so looking at the headlight youll see top part of the headlight brighter than the half bottom..so far im happy..if not ican do projector but i think yaris projectors uses h1...
thebarberGrand Rapids, MI · Jun 24, 2010#17
Originally Posted by marcus ↑
cool good to know.. so we pull then turn to adjust left and right? actually the cutoff was ok little spread around it but i still got the 2 spots shining on the wall when i was adjusting.. that the reason i went with bixenon cos those came with shields on them..so looking at the headlight youll see top part of the headlight brighter than the half bottom..so far im happy..if not ican do projector but i think yaris projectors uses h1...
i have h4 bixenon projectors in stock right now

the depot headlights use h1's
marcusThread startertoronto, canada · Jun 24, 2010#18
pls show me photos of this so called projectors...thanks bro. and ofcourse price. you are selling projectors right?

unless you meant the projector for stock housing which mean i have to open up the stock......if you throw in ur stock headlight with these projector i maybe interested.. shoot me a price.
Factstock3Yukon, OK · Feb 1, 2017#19
I know this is an old thread, but I had trouble finding information about yhe horizontal headlight adjuster anywhere until I removed my headlight. It is actually hiding under a cap (difficult to remove without breaking it) just to the outside of the headlight bulb and down a little bit. Once the cap is off, you will see a small plastic corkscrew that is used to adjust the light from left to right. I sincerely hope this helps someone else and im not reviving a 7 year old post for nothing.