Yarisworld Archive

ride height with new suspension bits

19 posts · 7,932 views

2manywheelsOriginal postCanada · Jun 21, 2010#1
Just installed this past friday.. Tokico Reds/ Progressive Springs and Ultra
sway bar.
Working the suspension before I take in for an alignment.

Couple of questions:
1. are front and rear ride height supposed to be different?
2. What should I expect in terms of handling characteristics?

I noticed body roll was minimized alot with this sway bar.
understeer seems more pronounced now when taking corners(not very spirited driving)

:)

1 attachment not included in this copy

Replies 18

darkmoon87Vancouver, BC · Jun 21, 2010#2
the rear will go lower. that's normal. as for driving, your handling will become more predictable. basically you turn where you want the car to go, and the car goes, even when you are doing a spirited run.
yariseggvvtiCali · Jun 21, 2010#3
Looks good when you lower it. Since you lower it the installed the rear sway bar...might as well go for more handling upgrade. UR strut bar, UR front lower 4 point bar, UR rear strut bar, rear lower bar. I didn't even lower my car but it handles tight.
darkmoon87Vancouver, BC · Jun 21, 2010#4
Originally Posted by yariseggvvti ↑
Looks good when you lower it. Since you lower it the installed the rear sway bar...might as well go for more handling upgrade. UR strut bar, UR front lower 4 point bar, UR rear strut bar, rear lower bar. I didn't even lower my car but it handles tight.
no offence at all but i want to point 1 thing.

i recently found out that on our cars, front strut tower bars (the one that goes in the engine bay) is completely for cosmetic purpose only.

Yaris has only 1 bolt sticking out from the front strut hat. Normally, other cars will have 2~3 bolts sticking out towards engine bay from the front suspension assembly. If the strut bar is bolted directly onto these bolts that originated from the suspension assembly, it will stablize and minimize the play between two front strut assemblies.

however, the yaris strut bar is not bolted onto the strut itself. it is simply bolted into holes around the top hat, and there is nothing beneath those holes.

in short, if you are solely making purchases for performance, you can skip the front strut tower bars.
Kaotic LazagnaCentral Valley, CA · Jun 21, 2010#5
^ I'm sure it provides some rigidity increase, even if it is minimal.
cali yarisCanoga Park, CA · Jun 21, 2010#6
recently found out that on our cars, front strut tower bars (the one that goes in the engine bay) is completely for cosmetic purpose only.
Wrong, sorry. I have tested my car at the track with the front upper strut brace on and off from session to session on the same day.

It might not make a difference poking around town but it does increase rigidity between the two strut towers.

Refer to this page for animations showing how it works:
http://www.ultraracing.com.my/template.asp?menuid=30
AstromanWenatchee, WA · Jun 21, 2010#7
Agreed, completely and utterly wrong on this. 🙄
darkmoon87Vancouver, BC · Jun 21, 2010#8
NOOOOOOOO!!!!!!!!!!!!!!


*walks away with shame*
toy_torontoTarrana, Canada · Jun 21, 2010#9
Don't feel bad darkmoon. I also read on one of the threads here that tower bars are mostly for cosmetics.. and I believed it. Until now.

-toy
ddongbaphay · Jun 22, 2010#10
I hear the brakes on our cars are just dead weight.
2manywheelsThread starterCanada · Jun 22, 2010#11
a set of good pads can fix that..(for the most part...)
:P
2manywheelsThread starterCanada · Jun 27, 2010#12
Have put 750km's on the vehicle around town since suspension bits installed.
Taking the vehicle in for an alignment.
Hoping this will make the difference as I swapped with a fellah here in town.
I drove his stock 5dr/HB etc.. He drove mine. He figured his wasn't that much different.
Except the rear body roll when cornering. I have yet to adjust the shocks/struts yet. Will wait until after the alignment, then test with the on board go pro.. and watch from someone elses perspective.
Hawk Pads are in.. Will install tonight.
:)
MUSKOKA800Chatham, Ontario, Canada · Jun 29, 2010#13
Originally Posted by 2manywheels ↑

I noticed body roll was minimized alot with this sway bar.
understeer seems more pronounced now when taking corners(not very spirited driving)

:)
I installed my TRD sway-bar before the other parts and found it really tightened up the handling. Understeer was greatly reduced. A month later I added the springs and dampers which brought it all together beautifully. Very balanced now but still with slight understeer. I wouldn't mind trying Ultra's heavier (thicker) sway-bar just to feel the effect. Is your's the small or large diameter bar?
2manywheelsThread starterCanada · Jun 29, 2010#14
Muskoka.. I have the smaller diameter sway bar.
Booked in the alignment for next tuesday. Hope we can get this lil bugger sorted out!!
What springs did you go with?
cali yarisCanoga Park, CA · Jun 29, 2010#15
are you going to specify some camber when you align the car?
MUSKOKA800Chatham, Ontario, Canada · Jun 30, 2010#16
Originally Posted by 2manywheels ↑
Muskoka.. I have the smaller diameter sway bar.
Booked in the alignment for next tuesday. Hope we can get this lil bugger sorted out!!
What springs did you go with?

Mines a TRD set-up. Springs, dampers and anti-sway bar.
MUSKOKA800Chatham, Ontario, Canada · Jun 30, 2010#17
Originally Posted by cali yaris ↑
are you going to specify some camber when you align the car?
I would suggest adding some negative camber up front if you plan to corner aggessively. With OEM spec. alignment my fronts are being eaten up from the outside inward.
Good riddance Goodyear LS
DeathBeardLos Angeles, CA · Jun 30, 2010#18
looks nice..I have the rear sway bar and love it to👍
2manywheelsThread starterCanada · Jun 30, 2010#19
The place doing the alignment are well versed(from what I was told. The shop that installed the parts etc. highly recommended them) in setting up whatever you want.
since everything seems to have loosened up a bit, you can see in the front where the tires are sitting heavy on the inside part of the tire more than the outside. and VERY twitchy. I will tell them what I want to do with it, but of course using it as a daily driver!