Yarisworld Archive

15x9.0 -3 offset 95mmm will it work??

35 posts · 18,079 views

JayTee09Original postHouston, Texas · Jun 10, 2010#1
my first big purchase and I wanna get it right 🆘

Picture not included in this copy

like the title says Im after a pretty radical fitment but at the same time I'd be devastated if they didnt fit. So tell me am I being too ambitious??

http://www.workwheelsusa.com/media/w...1_SPEC09A4.pdf

^^ link to the pdf size chart

Replies 34

cali yarisCanoga Park, CA · Jun 10, 2010#2
15x9 +17mm is about a 1 1/2" poke. so you are looking at least at a 2" wheel poke.

is that what you're after?

15 x 9 Work Meister:

Picture not included in this copy
WeeYariGeorgetown, Ontario, Canada · Jun 10, 2010#3
What does your gut tell you?

I'm gonna say no way in hell will they fit with that spec. Shown in the pic below is a 16x8 +0

1 attachment not included in this copy

JayTee09Thread starterHouston, Texas · Jun 10, 2010#4
well as it turns out I cant afford a set of works lol, so Ima shoot for a cheaper(and shallower) look-a-like, but yeah those are pretty close to what im lookin for. Thanks for the help guys
TamagoOff Grid · Jun 12, 2010#5
Axis OG's lol
JayTee09Thread starterHouston, Texas · Jun 13, 2010#6
^^ thats actually what I got haha
07blackvitzIrvine Ca · Jun 15, 2010#7
Yes it will work easy i fit 15x8 0 0ffset XXR 513's before i went to the more gangster Diamond racing setup now running 15x10 negative 30offset in front and negative 25 offset rear with some rolled and pulled fenders and stretched tires and 4 deg negative camber front and rear slight rub on hard turns in the front but rear no problems check my pics with the XXR and now Diamond racing.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
So dont listen to people on here that say its not possible you dont know until you try like me....who said you cant get crazy fitamanet on a Yaris....!!!
bzinn 1University Place,WA · Jun 15, 2010#8
wow both sets of wheels look great on the car......I have a buddy with a set of Works in about that offsets on his xB and we are gonna try them on my car to see how it looks
lilredrocketDFW, Texas · Jun 15, 2010#9
07 blackvitz lose the mud flaps they look silly with that wide of a setup.......
07blackvitzIrvine Ca · Jun 15, 2010#10
Yeah your right it does look weird with the mudflaps gonna take them off
lilredrocketDFW, Texas · Jun 15, 2010#11
Thank you
Bluevitz-rsOshawa, Ontario, Canada · Jun 16, 2010#12
OMG 😲 I'd be scared to turn around a corner for pulling the tires off the bead they're stretched so much.
JayTee09Thread starterHouston, Texas · Jun 16, 2010#13
thats friggin sick you are my new fitment poster idol lol
TamagoOff Grid · Jun 17, 2010#14
sure looks like your fenders are taking a beating there, Mr "Herrafrush"
TamagoOff Grid · Jun 17, 2010#15
it's form before function. if it looks dope, who cares what it does to your fenders, wheel bearings, bumpers, etc, right?

then again, i'm the pot calling the kettle black.. at least my poke serves a real world purpose....

Picture not included in this copy
cali yarisCanoga Park, CA · Jun 17, 2010#16
+1. Why does one have to be "right"?
07blackvitzIrvine Ca · Jun 17, 2010#17
True it's all up to what u are going for if you are tracking you car things of that nature this setup is hella unfunctional....I just posted my car with those diamond racing to just prove that the yaris can handle a crazy wheel offset if wanna go that route....I actually don't really have that setup on my car I still have the XXRs those actually came of my buddy Kyles miata from speedhunters...If I really wanted to run those I would probably put flares on like Garm on his car because it would just plain look ridiculous the way it is but I'm more type of guy that goes for form than function that's just me yeah of course it leads to wearing of tires fendeR rolling and killin wheel bearings but it's okay to me that what I have to deal with besides I'm a Lexus technician so I get discounts on toyota parts and have access to my shop and tools to fiX problems as they arise but it's all in good fun to me and it's fun to see how crazy are cars can really get oN fitament me and my friend were actually suprised that the yaris had that much clearance under there lock to lock and no I'm not into that hellaflush stuff Tamago just trying to show people how far a yaris can go as to fitament is all and just to let everyone know it's does come with a price like Tamago listed premature wear etc...but hey it's all about what your into..And this is nothing compared to the K-car scene and Vitz scene in Japan they run some ridiculous offset wheels lol....
07blackvitzIrvine Ca · Jun 17, 2010#18
But me and my buddy Kyle was Suprised that his wheel setup actually worked on the Yaris....Kyle is the type of guy all into crazy fitaments and we both were just curious that day if my car could even run them...Well here are the pics of My buddy Kyles car where i got the rims from.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
DeathBeardLos Angeles, CA · Jun 18, 2010#19
Originally Posted by 07blackvitz ↑
Yes it will work easy i fit 15x8 0 0ffset XXR 513's before i went to the more gangster Diamond racing setup now running 15x10 negative 30offset in front and negative 25 offset rear with some rolled and pulled fenders and stretched tires and 4 deg negative camber front and rear slight rub on hard turns in the front but rear no problems check my pics with the XXR and now Diamond racing.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
So dont listen to people on here that say its not possible you dont know until you try like me....who said you cant get crazy fitamanet on a Yaris....!!!

simply sick...how does one go about acheiving -4 camber? Are you running two set's of camber bolts per shock in the front?
DeathBeardLos Angeles, CA · Jun 18, 2010#20
Originally Posted by Thirty-Nine ↑
First off, I loved the look of the XXRs on your Yaris. I've also wanted to see what some widened steelies would look like, too.

However, I guess nowadays people have to decide what they mean by "fit."

Will they bolt up?
Will they rub?
Will you have to trim fenders? Roll fenders?

Especially with the Herraflush ... er Hellaflush trend, "fit" is a much broader term than it used to be.


haha so true
07blackvitzIrvine Ca · Jun 18, 2010#21
Your correct running two spc camber bolts for the front Thanks to Garm for his knowledge and also to his shop micro image for setting me up with those bolts.
JayTee09Thread starterHouston, Texas · Jun 19, 2010#22
OK so I got the wheels on today. didnt expect to cuz I ordered the tires a tad late (noon) but got them on before the day was over, Im not real happy whith the wheel setup but thats what I get for listenin to the discount tire guy and not my drift buddies :P

Picture not included in this copy

the wheels are Axis OG oldschools 15x8 +25 offset (aoe springs stock shocks) and the poke is good but now I cant move if someone sits in my back seat lol I was wonderin blackvits how much and how difficult is the camber kit. and what suspension are you runnin
ddongbaphay · Jun 19, 2010#23
Originally Posted by 07blackvitz ↑
Yes it will work easy i fit 15x8 0 0ffset XXR 513's before i went to the more gangster Diamond racing setup now running 15x10 negative 30offset in front and negative 25 offset rear with some rolled and pulled fenders and stretched tires and 4 deg negative camber front and rear slight rub on hard turns in the front but rear no problems check my pics with the XXR and now Diamond racing.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
So dont listen to people on here that say its not possible you dont know until you try like me....who said you cant get crazy fitamanet on a Yaris....!!!
DO YOU EFFIN WORK AT TUSTIN TOYOTA?!?!?!?1 I SWEAR I'VE SEEN U BEFORE.

Your setup is very similar to mine.

Low, rims, random bars on the back.
H8 InspectRCrenshaw · Jun 19, 2010#24
That MR-S on the 1st page is funny.

What kind of exhaust is that? 😆

Mr "Track Attack"
ddongbaphay · Jun 19, 2010#25
Originally Posted by Tamago ↑
it's form before function. if it looks dope, who cares what it does to your fenders, wheel bearings, bumpers, etc, right?

then again, i'm the pot calling the kettle black.. at least my poke serves a real world purpose....

Picture not included in this copy
I feel a little poke commin' through.. on you...
FunctionSpec626, Southern California · Jun 19, 2010#26
jaytee, what is the tire size for your setup?

Looks like the right tire size for the wheels but the wrong size to make those wheels fit on the car.
JayTee09Thread starterHouston, Texas · Jun 19, 2010#27
225/50/15 and they the ideal fit for the wheels as far as an oem look is concerned but I wanted it to look a tad more . . . Radical lol, ie shorter tires and stretched rubber so on so forth but I'm stuck with them for now
lilredrocketDFW, Texas · Jun 19, 2010#28
Haha... Should have went 225/45 to avoid the rub on the rear. Do a DIY on rolling your fenders.
lilredrocketDFW, Texas · Jun 19, 2010#29
The MR2's exhaust is a custom setup with Super Trapp mufflers and they sound freaking amazing!!!!!!!
07blackvitzIrvine Ca · Jun 20, 2010#30
To answer your question JayTee the camber kit is not that expensive or really hard to put in I Just used 2 front Eccentric style bolts from Spc on both front shocks, actually got the kits from Garms shop Micro Image online and made my own Shims for the rear all it is a thicker washer like Penguin makes with the top grinded off them with camber u should be able to minimize or even take care of the rubbing issue those shims basically just go behind the rear hubs...really easy install, oh I'm just running Tein basic coilovers with one locking ring removed from the rear cause it's maxed out anyway with just Trd rear sway that's all....I probably would have gone with a 195/50/r15 to give it a stretch for some clearance as well.Instead of he 205's that u runnin would help give it some clearance as well or if you want more maybe 185/45/r15.
07blackvitzIrvine Ca · Jun 20, 2010#31
And yes ddongbap you probably did see me around before no I actually work at Tustin Lexus tech over there...righT next door to Tustin Toyota small world for sure lol...
FunctionSpec626, Southern California · Jun 20, 2010#32
185/55 would of worked out well.

Take it back and complain, the tech recommended it and now you cant have passengers in the back seat.

And btw, that MR-S has some ugly wheel/tire setup.......i hope you are some badass on the track cause that shit looks ugly....lol
ddongbaphay · Jun 20, 2010#33
Originally Posted by 07blackvitz ↑
And yes ddongbap you probably did see me around before no I actually work at Tustin Lexus tech over there...righT next door to Tustin Toyota small world for sure lol...
I know I've seen you on the 5 north. And I know you've seen me.
JayTee09Thread starterHouston, Texas · Jun 20, 2010#34
Originally Posted by 07blackvitz ↑
To answer your question JayTee the camber kit is not that expensive or really hard to put in I Just used 2 front Eccentric style bolts from Spc on both front shocks, actually got the kits from Garms shop Micro Image online and made my own Shims for the rear all it is a thicker washer like Penguin makes with the top grinded off them with camber u should be able to minimize or even take care of the rubbing issue those shims basically just go behind the rear hubs...really easy install, oh I'm just running Tein basic coilovers with one locking ring removed from the rear cause it's maxed out anyway with just Trd rear sway that's all....I probably would have gone with a 195/50/r15 to give it a stretch for some clearance as well.Instead of he 205's that u runnin would help give it some clearance as well or if you want more maybe 185/45/r15.
thank you very much sir 🙇





Originally Posted by FunctionSpec ↑
185/55 would of worked out well.

Take it back and complain, the tech recommended it and now you cant have passengers in the back seat.

And btw, that MR-S has some ugly wheel/tire setup.......i hope you are some badass on the track cause that shit looks ugly....lol
I would but I bought them at work and im paying them off with my paychecks so im kinda stuck with them at least till I have them paid for


oh and better pics comin up
JayTee09Thread starterHouston, Texas · Jun 20, 2010#35
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy